1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your BLNAN 12-inch Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for hardwired installation and features selectable color temperatures and multiple operating modes.
2. Safety Information
WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper wiring can cause electric shock or fire.
- Ensure the power supply is turned off before beginning installation.
- All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
- Do not install this fixture with wet hands or while standing on a wet surface.
- This fixture is designed for indoor use. While rated for some outdoor uses like porches, ensure it is protected from direct water exposure.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create safety hazards.
3. Package Contents
Verify that all components are present before installation:
- 1x Motion Detector Corded Ceiling Light
- 1x Mounting Hardware Package (includes wire nuts, screws, anchors)
- 1x Instruction Manual
Image: Contents of the BLNAN 12-inch Motion Sensor LED Ceiling Light package, showing the light fixture, mounting hardware, and user manual.
4. Product Features
- Selectable Color Temperatures: Choose between 3000K (Warm White), 4000K (Neutral White), and 5000K (Cold White) using a toggle switch before installation.
- Multiple Operating Modes: AUTO (Motion + Light Sensor), ON (Constant Light), and G (Motion Sensor Only).
- PIR Motion Sensor: Built-in infrared motion detector with a 120° detection angle and a detection range of 10-20 feet (semi-diameter).
- Adjustable Hold Time: Set the light to stay on for 30 seconds, 120 seconds, or 180 seconds after motion ceases.
- Ultra-Thin Design: 12-inch diameter with a thickness of 0.99 inches, suitable for low ceilings.
- High Brightness: 2400 Lumens at 24 Watts.
- High CRI: Color Rendering Index (CRI) of 90 for accurate color representation.
- Installation Versatility: Can be installed on ceilings or walls.
5. Setup and Installation
Before installation, ensure the power is OFF at the circuit breaker.
5.1 Pre-Installation Settings
Before mounting the fixture, adjust the desired color temperature, operating mode, and hold time using the switches located on the back of the light.
Image: Switches on the back of the fixture for adjusting hold time, operating mode, and color temperature.
Color Temperature Selection (C/N/W Switch)
- C (5000K): Cold White
- N (4000K): Neutral White
- W (3000K): Warm White
Image: Visual representation of the three selectable color temperatures and the toggle switch.
Operating Mode Selection (AUTO/ON/G Switch)
- AUTO: Motion and Light Sensor activated. The light turns on when motion is detected in dark conditions and turns off after the set hold time. It will not activate during daylight.
- ON: Constant Light. The light remains continuously on, bypassing the motion sensor.
- G: Motion Sensor Only. The light turns on when motion is detected, regardless of ambient light conditions (day or night), and turns off after the set hold time.
Image: Explanation of AUTO, ON, and G modes with their respective behaviors.
Hold Time Selection (30s/120s/180s Switch)
- Choose how long the light stays on after motion is no longer detected: 30 seconds, 120 seconds, or 180 seconds.
5.2 Installation Steps
This fixture supports both ceiling mount and wall mount installations. Recommended mounting height for optimal motion detection is 8-11.5 feet.
Image: Illustration of wall mount and ceiling mount installation methods and their respective detection ranges.
- Prepare the Fixture: Rotate and remove the plastic mounting bracket from the light fixture.
- Attach Bracket: Securely attach the plastic mounting bracket to your existing junction box. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes. Use the provided screws.
- Connect Wiring: Hang the light fixture using the integrated hanging rope for support. Connect the household electrical wires to the fixture's wires using the provided wire nuts. Connect live to live (black to black), neutral to neutral (white to white), and ground to ground (green/bare copper to green/bare copper). Ensure all connections are secure.
- Mount Fixture: Align the light fixture with the mounted bracket and rotate it clockwise until it locks securely into place.
Image: Step-by-step visual guide for installing the ceiling light.
After installation, restore power at the circuit breaker and test the light's functionality.
6. Operating Instructions
Once installed and powered, the light will operate according to the settings selected via the switches on the back of the fixture (Color Temperature, Mode, Hold Time). Refer to Section 5.1 for details on setting these parameters.
6.1 Motion Sensor Operation
The PIR motion sensor detects movement within its range. The detection angle is 120 degrees, and the effective detection range is approximately 10-20 feet (semi-diameter) when ceiling mounted at 8-11.5 feet.
Image: Motion sensor detection angle, range, and recommended installation height.
For optimal performance, avoid installing the light near heat sources, air conditioning vents, or in areas with significant air movement, as these can interfere with motion detection.
7. Maintenance
To ensure the longevity and optimal performance of your BLNAN LED Ceiling Light, follow these simple maintenance guidelines:
- Cleaning: Ensure power is off before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the fixture. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Inspection: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
- LEDs: The integrated LED lights are designed for long life and are not user-replaceable.
8. Troubleshooting
If you encounter issues with your BLNAN Motion Sensor LED Ceiling Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light stays on continuously. |
|
|
| Light turns on randomly. |
|
|
| Light turns off too quickly/slowly. | Incorrect hold time setting. | Adjust the 'Hold Time' switch to the desired duration (30s, 120s, or 180s). |
9. Specifications
| Feature | Specification |
|---|---|
| Brand | BLNAN |
| Model Name | Ceiling Light (LS-CL-G24W-M-S) |
| Product Dimensions | 12"L x 12"W x 0.98"H |
| Item Weight | 1.81 pounds |
| Material | Plastic |
| Color | White |
| Light Source Type | LED |
| Wattage | 24 Watts |
| Brightness | 2400 Lumens |
| Voltage | 120 Volts |
| Color Temperatures | 3000K, 4000K, 5000K (Selectable) |
| Color Rendering Index (CRI) | 90.00 |
| Dimmable | No |
| Sensor Type | PIR Infrared Motion Sensor |
| Detection Angle | 120 degrees |
| Detection Range | 10-20 ft (semi-diameter) |
| Installation Type | Flush Mount (Ceiling or Wall) |
| Indoor/Outdoor Usage | Indoor (Suitable for covered outdoor areas like porches) |
| Water Resistance Level | Not Water Resistant |
10. Warranty and Support
BLNAN is committed to providing high-quality lighting products. For any questions, concerns, or support needs regarding your BLNAN Motion Sensor LED Ceiling Light, please contact our customer service. We value sincere exchanges and are here to assist you.
Please note: We do not have the authority to proactively contact buyers. Please reach out to us directly if you require assistance.
