Introduction
This manual provides essential instructions for the proper use, care, and maintenance of your Mondaine Evo2 Automatic Watch, model MSE.40610.LBV. This timepiece features a self-winding mechanical movement, reflecting Swiss precision and craftsmanship. Please read this manual thoroughly to ensure optimal performance and longevity of your watch.
Image: Front view of the Mondaine Evo2 Automatic watch, showcasing its iconic white dial, black hands, and red second hand, along with the black leather strap.
Setup and Initial Winding
Your Mondaine Evo2 Automatic watch is powered by a mechanical movement that winds itself with the motion of your wrist. However, for initial setup or if the watch has stopped, manual winding is required.
- Unscrew the Crown (if applicable): Some models feature a screw-down crown for enhanced water resistance. If your crown is screw-down, gently turn it counter-clockwise until it releases.
- Manual Winding: With the crown in its normal, pushed-in position (or unscrewed and in position 0 if it's a screw-down crown), turn the crown clockwise approximately 30-40 times. This will build up a power reserve to start the watch.
- Setting the Time: Pull the crown out to position 2 (the outermost position). Turn the crown clockwise or counter-clockwise to set the correct time. Push the crown back in to position 0 to start the watch.
- Setting the Date (if applicable): Pull the crown out to position 1 (the middle position). Turn the crown clockwise or counter-clockwise to set the correct date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement. Push the crown back in to position 0.
- Secure the Crown: If your watch has a screw-down crown, push it in firmly and turn it clockwise to screw it back down securely against the case. This is crucial for maintaining water resistance.
Image: Side view of the watch, highlighting the crown used for winding and setting the time and date.
Operating Your Watch
Automatic Winding
Once initially wound, your automatic watch will continue to run as long as it is worn regularly. The rotor inside the watch moves with your wrist, winding the mainspring. If the watch is not worn for an extended period (typically 36-48 hours, depending on the movement's power reserve), it will stop and require manual winding to restart.
Water Resistance (50m / 5 ATM)
Your Mondaine Evo2 Automatic watch is water resistant up to 50 meters (5 ATM). This rating means the watch is suitable for everyday use, including showering, hand washing, and brief immersion in water. It is not suitable for swimming, diving, or prolonged water activities.
- Do not operate the crown or pushers (if any) while the watch is wet or submerged.
- Ensure the crown is always fully pushed in and, if applicable, screwed down to maintain water resistance.
- Avoid exposing the watch to extreme temperature changes, which can affect the water resistance seals.
Maintenance and Care
Cleaning
To clean your watch, wipe the case and crystal with a soft, dry, lint-free cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure the crown is fully secured. Avoid using chemical cleaners, solvents, or abrasive materials.
Strap Care
The watch features a black cowhide leather strap. Leather is a natural material and requires proper care to maintain its appearance and longevity.
- Avoid prolonged exposure to water, direct sunlight, and extreme temperatures.
- Clean the strap with a soft, damp cloth and mild soap if necessary, then allow it to air dry completely away from direct heat.
- Leather straps will naturally show signs of wear over time and may need replacement.
Storage
When not wearing your watch, store it in a cool, dry place, away from direct sunlight and strong magnetic fields. A watch box or pouch is ideal for protection.
Service
Mechanical watches benefit from periodic servicing, typically every 3-5 years, to ensure optimal performance and accuracy. This involves cleaning, lubricating, and adjusting the movement. Contact an authorized Mondaine service center for professional servicing.
Image: View of the watch's transparent case back, showing the intricate automatic movement and the genuine leather strap.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch has stopped or is running slowly. | Insufficient power reserve. | Manually wind the watch by turning the crown clockwise 30-40 times. Wear the watch regularly to maintain power reserve. |
| Time is inaccurate. | Watch needs regulation or service; exposure to strong magnetic fields. | Keep the watch away from strong magnets. If inaccuracy persists, contact an authorized service center for regulation or demagnetization. |
| Condensation under the crystal. | Loss of water resistance due to impact or aging seals. | Immediately take the watch to an authorized service center to prevent damage to the movement. Avoid further contact with water. |
Specifications
- Model Number: MSE.40610.LBV
- Movement: Automatic Mechanical
- Case Material: Stainless Steel
- Dial Color: White
- Strap Material: Black Cowhide Leather
- Water Resistance: 50 meters (5 ATM)
- Country of Origin: Switzerland
- Approximate Weight: 240g (including packaging, actual watch weight will be less)
Warranty and Support
Your Mondaine Evo2 Automatic watch is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region. Please refer to the warranty card included with your purchase or visit the official Mondaine website for detailed warranty information.
For technical assistance, service requests, or warranty claims, please contact an authorized Mondaine service center or Mondaine customer support. Contact information can typically be found on the official Mondaine website: www.mondaine.com.
