TigerDad Adjustable Overbed Table with Wheels - Model 0203 Instruction Manual

1. Product Overview

The TigerDad Adjustable Overbed Table, Model 0203, is designed to provide a flexible and convenient surface for various activities while in bed or on a sofa. Its adjustable height and tilt features, along with mobile casters, make it suitable for a range of uses including working on a laptop, eating, reading, or engaging in hobbies.

Figure 1: TigerDad Adjustable Overbed Table, Model 0203. This image shows the table in its standard configuration, highlighting its adjustable height and tilting desktop.

2. Important Safety Information

Caution: Please read and follow all assembly and usage instructions carefully to prevent injury or damage to the product. Keep hands and fingers clear of moving parts during adjustment. Do not overload the table; the maximum weight capacity is 22 lbs (10 kg). Always use the safety edge stopper to prevent items from sliding off the tilted tabletop.

3. Package Contents

Before assembly, ensure all parts are present and undamaged. The package includes:

• Main Tabletop (split design)
• Base Frame with pre-installed casters
• Vertical Support Pole
• Adjustable Tilting Mechanism
• Safety Edge Stopper
• Assembly Tools (Allen wrench, spanner)
• Instruction Manual
• All necessary bolts, nuts, and washers

Figure 2: Visual representation of the table's components and key dimensions for reference during assembly.

4. Assembly Instructions

Assembly is required and can typically be completed in minutes with the included tools. Follow these steps:

1. Assemble the Base: Connect the two parts of the base frame using the provided bolts and nuts. Ensure they are securely tightened.
2. Attach Casters: The four 1-inch casters are pre-installed on the base. Ensure they are securely attached and functional.
3. Install Vertical Support Pole: Attach the vertical support pole to the assembled base using the designated bolts and nuts.
4. Assemble Desktop Components: Attach the tilting mechanism and the safety edge stopper to the underside of the main tabletop.
5. Mount Tabletop to Support Pole: Insert the tabletop assembly onto the top of the vertical support pole. Secure it with the adjustment knobs.
6. Final Tightening: Double-check all bolts and nuts to ensure they are fully tightened for stability.

5. Operating Instructions

5.1. Height Adjustment

To adjust the table's height (from 23.6 inches to 35.3 inches), loosen the height adjustment knob located on the vertical support pole. Raise or lower the tabletop to your desired height, then securely tighten the knob to lock it in position.

Figure 3: Illustration of the height adjustment feature, showing the range of vertical movement.

5.2. Tabletop Tilt Adjustment

The main tabletop can be tilted from 0 to 60 degrees. Loosen the tilt adjustment knobs located beneath the tabletop. Adjust the angle to your preference, then tighten the knobs firmly to secure the tilt. Always ensure the safety edge stopper is in place when tilting to prevent items from sliding.

Figure 4: Demonstrates the 360-degree tilting capability of the main desktop surface.

5.3. Mobility and Locking Casters

The table is equipped with four smooth-rolling casters for easy movement. Each caster includes a stop plug (brake). To move the table, ensure all stop plugs are disengaged. To secure the table in place, press down on the stop plugs on each caster until they lock.

Figure 5: Close-up view of the lockable casters and the safety edge stopper, essential for secure and stable operation.

6. Product Features

• Adjustable Height: Easily adjust the table height from 23.6 inches to 35.3 inches to suit various needs and preferences.
• Tiltable Desktop: The main desktop surface can be tilted up to 60 degrees, providing an ergonomic angle for reading or laptop use.
• Mobile Design: Four smooth-rolling casters allow for effortless movement across different floor surfaces.
• Lockable Wheels: Each caster features a stop plug to securely lock the table in position, ensuring stability during use.
• Safety Edge Stopper: A built-in stopper prevents laptops, books, or other items from sliding off the tilted surface.
• Durable Construction: Made with a 15mm thick E1 grade MDF panel and a sturdy metal frame for long-lasting use.
• Versatile Use: Ideal for use as a laptop desk, breakfast tray, reading stand, or general-purpose table over a bed or sofa.

7. Maintenance

• Cleaning: Wipe the tabletop and frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
• Regular Checks: Periodically inspect all bolts, nuts, and adjustment knobs to ensure they remain tight. Re-tighten if necessary to maintain stability.
• Caster Care: Keep casters free of debris (hair, lint) to ensure smooth rolling.
• Storage: Store the table in a dry environment away from extreme temperatures.

8. Troubleshooting

• Table is Wobbly:
  • Ensure all assembly bolts and nuts are securely tightened.
  • Check that the height adjustment knob is firmly engaged.
  • Verify that the casters are locked if you intend for the table to remain stationary.
• Items Sliding Off Tilted Surface:
  • Ensure the safety edge stopper is properly installed and engaged.
  • Verify that the tabletop tilt adjustment knobs are securely tightened.
• Difficulty Adjusting Height/Tilt:
  • Loosen the respective adjustment knobs sufficiently before attempting to change position.
  • Ensure no obstructions are preventing movement.

9. Specifications

10. Warranty and Support

For any issues with the wheels or screws, please contact TigerDad customer support. Replacement parts will be sent free of charge. For other inquiries or support, please refer to the contact information provided with your purchase or visit the official TigerDad website.