1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your NUWATT 6-inch 2-hour fire rated recessed LED lights. Please read this manual thoroughly before installation and retain it for future reference. These lights are designed for both residential and commercial applications, offering selectable color temperatures, dimmable functionality, and a robust fire-rated design.
Image 1.1: NUWATT 6-inch 2-hour fire rated recessed LED light with its associated junction box and wiring connectors.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- Installation must be performed by a qualified electrician in accordance with the National Electrical Code and local codes.
- Ensure the supply voltage is 120V AC, 60Hz.
- Do not modify or alter the fixture.
- Do not install in areas with explosive atmospheres.
- This fixture is suitable for wet locations and IC (Insulated Ceiling) rated, meaning it can be in direct contact with insulation.
- The fixture is 2-hour fire rated, meeting UL263 standards. No additional fire-rated covers are required.
- Always wear safety glasses and gloves during installation.
3. Package Contents
Verify that all components are present before beginning installation:
- NUWATT 2 Hour Fire Rated LED Recessed Light (Quantity as per pack size)
- Diecast Aluminum Junction Box
- Wiring Instructions (this manual)
- Cutout Hole Template
4. Product Features
The NUWATT 6-inch recessed LED light offers advanced features for safety and versatility:
- 2-Hour Fire Rated: Independently tested to withstand fire exposure for up to 2 hours (UL263, ASTME119, ULC S101 standards). Eliminates the need for additional tenmat recessed light covers.
- 5 CCT Selectable: Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Neutral White), 4000K (Cool White), and 5000K (Daylight) using a switch on the junction box.
- Dimmable: Compatible with most standard dimmers, allowing dimming from 100% down to 10%.
- High CRI 90+: Provides accurate color rendering for vibrant and true-to-life illumination.
- IC Rated & Air Tight: Suitable for direct contact with insulation and prevents air leakage, improving energy efficiency.
- Wet Rated: Ideal for use in bathrooms, outdoor soffits, and other damp or wet locations.
- Ultra-Thin Design: Canless installation with a low-profile junction box, fitting into tight ceiling spaces.
- Durable Construction: Features fire-resistant steel, die-cast aluminum frame, and heavy-duty steel clips for secure installation.
Image 4.1: Overview of product certifications (ETL, Energy Star) and key features.
Image 4.2: Close-up of various components and features, including the wire lock and CCT switch.
5. Specifications
| Attribute | Value |
|---|---|
| Brand | NUWATT |
| Model Name | NW-P-DL-6-15W-5CT-FR-WH-6P |
| Size | 6 Inch |
| Wattage | 15 Watts |
| Brightness | 1200 Lumens |
| Color Temperature | 2700K, 3000K, 3500K, 4000K, 5000K Selectable |
| Voltage | 120 Volts |
| CRI | 90+ |
| Dimmable | Yes (10-100%) |
| Fire Rating | 2 Hour (UL263, ASTME119, ULC S101) |
| IC Rated | Yes |
| Wet Rated | Yes |
| Material | Fire Rated Steel, Diecast Aluminum, Polycarbonate |
| Product Dimensions | 6.85"L x 6.85"W x 1.5"H |
| Certifications | ETL, Energy Star, FCC, RoHS, UL Standard |
Image 5.1: Dimensional drawing of the recessed light and junction box with wiring details.
6. Installation Instructions
Follow these steps for a safe and proper installation:
- Turn Off Power: Before starting, ensure the power supply to the installation area is completely turned off at the circuit breaker or fuse box.
- Cut Hole: Use the provided template to mark the desired location on the ceiling. Cut a 6-1/4 inch (158mm) diameter hole. Ensure there are no obstructions behind the ceiling.
- Connect Wires: Open the junction box. Connect the supply wires to the corresponding wires in the junction box using the provided push connectors: black to black (Line), white to white (Neutral), and green/bare copper to green (Ground). Ensure all connections are secure.
- Select Color Temperature (CCT): Locate the CCT selection switch inside the junction box. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) before closing the junction box.
- Secure Junction Box: Place the junction box through the cutout hole and secure it above the ceiling. The IC rating allows it to be in direct contact with insulation.
- Connect Light to Junction Box: Connect the male connector from the light fixture to the female connector from the junction box. Ensure a tight, water-resistant connection.
- Insert Light Fixture: Gently push the spring-loaded clips on the side of the light fixture upwards and insert the fixture into the ceiling cutout. The clips will spring back down to hold the fixture securely in place.
- Restore Power: Once the fixture is securely installed, restore power at the circuit breaker.
Image 6.1: Step-by-step visual guide for the canless installation process.
Video 6.1: Official product video demonstrating the features and installation of the NuWatt 2 Hour Fire Rated LED Downlight.
7. Operating Instructions
Your NUWATT recessed LED light is designed for simple operation:
- Power On/Off: Use a standard wall switch to turn the light fixture on or off.
- Color Temperature Selection: The desired color temperature (CCT) must be selected using the switch located inside the junction box before installation. Once installed, if you wish to change the CCT, you will need to carefully remove the fixture to access the junction box.
- Dimming: If connected to a compatible dimmer switch, you can adjust the brightness from 100% down to 10%. Ensure your dimmer switch is rated for LED lighting.
Image 7.1: Illustration of the 5 selectable color temperatures (CCT) available.
8. Maintenance
These LED lights require minimal maintenance:
- Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Bulb Replacement: The LED light source is integrated and not user-replaceable. The fixture is designed for long-term use.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
9. Troubleshooting
If you encounter issues with your NUWATT recessed LED light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply; Loose wiring connection; Faulty fixture. | Check circuit breaker/fuse. Verify all wire connections are secure. If problem persists, contact customer support. |
| Light flickers or dims inconsistently | Incompatible dimmer switch; Loose wiring; Voltage fluctuations. | Ensure dimmer is LED compatible. Check wiring connections. Consult an electrician for voltage issues. |
| Incorrect color temperature | CCT switch set incorrectly. | Disconnect power, carefully remove fixture, and adjust the CCT switch inside the junction box. |
| Light makes buzzing noise | Incompatible dimmer switch; Loose wiring. | Replace dimmer with an LED-compatible model. Check wiring connections. |
10. Warranty and Customer Support
NUWATT stands behind the quality of its products.
- Warranty: All NUWATT LED recessed lighting fixtures are backed by a 5-year warranty. This warranty covers defects in materials and workmanship under normal use.
- Customer Service: For any questions, technical assistance, or warranty claims, please contact our US-based customer service team. Refer to the contact information provided on the product packaging or the official NUWATT website.
Please have your model number (NW-P-DL-6-15W-5CT-FR-WH-6P) and proof of purchase ready when contacting support.