Product Overview
The BEAUTURAL Automatic Soap Dispenser provides a hygienic and convenient solution for dispensing liquid soap. Utilizing advanced infrared sensing technology, it offers touchless operation, reducing germ transfer. Its large 17oz/500ml capacity and transparent reservoir allow for easy monitoring and refilling. The dispenser features two adjustable dispensing levels and is powered by a rechargeable Type-C battery, offering extended use on a single charge. Designed for versatility, it is suitable for various environments including bathrooms and kitchens, featuring an IPX5 waterproof rating and non-slip pads for stability.
Image: The BEAUTURAL Automatic Soap Dispenser in action, showing soap being dispensed into a hand.
Safety Instructions
- Do not immerse the entire unit in water. The unit is IPX5 waterproof, meaning it is protected against low-pressure water jets, but not full submersion.
- Keep out of reach of children unless supervised by an adult.
- Use only liquid soap or hand sanitizer. Do not use thick or granular liquids as they may clog the dispenser.
- Ensure the Type-C charging port is properly sealed with its silicone plug when not charging to maintain water resistance.
- Avoid placing the dispenser in direct sunlight or near heat sources.
- Do not attempt to disassemble or repair the unit yourself. Contact customer support for assistance.
Package Contents
Please check the package for the following items:
- BEAUTURAL Automatic Soap Dispenser (1 unit)
- Type-C Charging Cable (1 unit)
- User Manual (this document)
Product Features
- Advanced Infrared Sensing: Touchless operation for hygienic soap dispensing.
- Dual Dispensing Modes: Two adjustable soap volume settings based on hand distance from the sensor.
- High Capacity & Transparent Reservoir: 17oz/500ml capacity with a clear body for easy soap level monitoring and refilling.
- Efficient Type-C Charging: Quick 2-hour charge provides over 7000 uses.
- IPX5 Waterproof: Enhanced durability and protection against water splashes.
- Four Non-slip Pads: Ensures stability on various surfaces.
- No-Drip Spout: Prevents messy drips after dispensing.
Image: Dispenser highlighting touch-free operation and 17 oz capacity.
Image: Detailed views of key features: infrared sensor, Type-C charging port, refill opening, and anti-slip base.
Image: Dispenser demonstrating its IPX5 waterproof capability with water splashes.
Setup
- Unboxing: Carefully remove the dispenser and all accessories from the packaging.
- Initial Charge: Before first use, fully charge the dispenser using the provided Type-C cable. Connect the cable to the charging port on the back of the unit and plug the other end into a standard USB power adapter (not included). The charging indicator will show the charging status. A full charge takes approximately 2 hours.
- Filling the Dispenser:
- Remove the top lid of the dispenser.
- Pour liquid soap or hand sanitizer into the transparent reservoir. Do not overfill; leave a small air gap at the top.
- Replace the top lid securely.
Image: Detail showing the easy refill opening of the dispenser.
- Placement: Place the dispenser on a flat, stable surface. Ensure the four non-slip pads on the base are in contact with the surface for maximum stability. Keep it away from direct water spray or excessive humidity when not in use.
Operating Instructions
- Power On/Off: Press and hold the power button (usually located on the front or base) for a few seconds to turn the dispenser on or off. A light indicator may confirm the status.
- Dispensing Soap: Place your hand under the dispenser's spout. The infrared sensor will detect your hand and automatically dispense a measured amount of soap.
- Adjusting Dispensing Levels: The dispenser features two dispensing levels. The amount of soap dispensed is determined by the distance of your hand from the sensor.
- For a smaller amount, hold your hand closer to the spout.
- For a larger amount, hold your hand slightly further away from the spout.
Image: Examples of the dispenser's versatile use in bathroom and kitchen environments.
Image: An adult and child demonstrating the ease of use for all ages.
Maintenance
- Cleaning: Wipe the exterior of the dispenser with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the charging port's silicone plug is closed during cleaning.
- Refilling: When the soap level is low, refill the reservoir as described in the "Setup" section. Avoid letting the dispenser run completely dry to prevent air from entering the pump mechanism.
- Long-Term Storage: If storing the dispenser for an extended period, empty the soap reservoir, clean the unit, and ensure it is fully charged before storage. Store in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dispenser not working / No soap dispensed. |
|
|
| Soap dispenses too much or too little. | Hand placement is incorrect for desired volume. | Adjust the distance of your hand from the sensor. Closer for less, further for more. Practice to find the optimal distance. |
| Charging not working. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | BEAUTURAL |
| Model Number | B0C7KYVCSG |
| Capacity | 17 oz / 500 ml |
| Material | Acrylic |
| Color | White |
| Power Source | Rechargeable Battery (Type-C) |
| Waterproof Rating | IPX5 |
| Product Dimensions | 13.7L x 7.9W x 22.4H Centimetres |
| UPC | 842120106169 |
Warranty and Support
For warranty information or technical support, please contact BEAUTURAL customer service. Refer to the product packaging or the official BEAUTURAL website for the most up-to-date contact details.
You can also visit the BEAUTURAL Store on Amazon for more product information and support resources.