HIBREW H1A Multi-Capsule Espresso Coffee Machine

1. Introduction

Thank you for choosing the HIBREW H1A Multi-Capsule Espresso Coffee Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new coffee machine. Please read it thoroughly before first use and keep it for future reference.

Important Safety Instructions

• Read all instructions before using the appliance.
• Do not immerse the appliance, power cord, or plug in water or other liquids.
• Ensure the voltage specified on the appliance matches your local power supply.
• Keep the appliance out of reach of children.
• Unplug the machine when not in use and before cleaning.
• Do not operate the machine with a damaged cord or plug.
• Use only clean, cold water in the water tank.
• Avoid contact with hot surfaces.

2. Product Components

Familiarize yourself with the various parts of your HIBREW H1A coffee machine.

Figure 2.1: Overview of the HIBREW H1A Multi-Capsule Espresso Coffee Machine. This image displays the compact black coffee machine with a clear water tank, a cup of freshly brewed coffee, and various capsule types and coffee beans around its base.

Figure 2.2: Front view of the HIBREW H1A coffee machine, highlighting the control panel with power, short espresso, and lungo buttons, along with the coffee spout and drip tray.

Key Parts:

• Water Tank: Removable 600ml BPA-free tank for water.
• Control Panel: Power button, Short Espresso button, Lungo button.
• Brewing Chamber: Area where capsule adapters or ground coffee adapter are inserted.
• Coffee Spout: Where brewed coffee dispenses.
• Drip Tray: Removable tray to catch drips and spills.
• Capsule Adapters: Includes adapters for Nes, DG, ES* pods, and K-Cu* capsules.
• Ground Coffee Adapter: For use with ground coffee.

3. First Use and Setup

3.1 Unpacking

Carefully remove all packaging materials. Ensure all components listed in Section 2 are present and undamaged. Keep packaging for future transport if needed.

3.2 Initial Cleaning

1. Remove the water tank and wash it with mild detergent and warm water. Rinse thoroughly.
2. Clean the drip tray and any capsule adapters with warm, soapy water. Rinse and dry.
3. Wipe the exterior of the machine with a damp cloth.

3.3 Filling the Water Tank

• Fill the water tank with fresh, cold drinking water up to the MAX level indicator.
• Place the water tank back onto the machine, ensuring it is securely seated.

3.4 Priming the Machine (First Use)

Before brewing coffee for the first time, or if the machine has not been used for a long period, it is essential to prime the system:

1. Ensure the water tank is filled.
2. Place an empty cup on the drip tray.
3. Do not insert any capsule or ground coffee adapter.
4. Plug the machine into a power outlet.
5. Press the Power button. The machine will begin preheating.
6. Once preheating is complete (buttons stop flashing), press the Lungo button. Water will dispense into the cup.
7. Repeat this process 2-3 times to thoroughly flush the system.

4. Operating Instructions

4.1 Powering On and Preheating

• Ensure the water tank is filled with fresh water.
• Plug the machine into a power outlet.
• Press the Power button. The machine will start preheating. The Short Espresso and Lungo buttons will flash during this time.
• Preheating typically takes about 40 seconds. The buttons will stop flashing and remain steadily lit when the machine is ready for brewing.

4.2 Using Different Adapters (4-in-1 Compatibility)

The HIBREW H1A is compatible with various coffee formats:

Figure 4.1: Illustration of the HIBREW H1A's 4-in-1 compatibility, displaying adapters for KEURIG K-Cup, Nes OriginalLine, L'OR, LAVAZZA, Dolce Gusto Nes, Dolce Gusto Starbucks capsules, and a ground coffee adapter. Note: Not suitable for Nes VertuoLine or ESE Pods.

1. Open the brewing chamber lid.
2. Select the appropriate adapter for your chosen coffee format (Nes, DG, K-Cup, ES* pod, or ground coffee).
3. Insert the capsule or fill the ground coffee adapter with your desired amount of coffee.
4. Place the loaded adapter into the brewing chamber.
5. Close the brewing chamber lid firmly until it clicks into place.

4.3 Brewing Coffee (Hot Brew Mode)

After preheating and inserting your coffee:

Figure 4.2: Instructions for activating Hot Brew Mode (quick press On/Off button) and Cold Brew Mode (press On/Off button for 2 seconds) on the HIBREW H1A coffee machine.

1. Place a cup on the drip tray.
2. For Hot Brew Mode, ensure the machine is preheated (buttons steadily lit).
3. Press either the Short Espresso button (70 mL) or the Lungo button (110 mL). The machine will begin brewing.
4. The brewing process will stop automatically once the selected volume is dispensed.
5. To stop brewing manually at any time, press the active brew button again.

4.4 Cold Brew Mode

The HIBREW H1A also supports cold brewing:

• Insert your desired capsule or ground coffee adapter.
• Place a cup with ice on the drip tray.
• Press and hold the Power button for 2 seconds to enter Cold Brew Mode.
• Press either the Short Espresso or Lungo button to start brewing.
• Note: Cold brew mode brews at room temperature and does not have a refrigeration function. Add ice to your cup before brewing.

4.5 Customizing Brew Volume

You can customize the brew volume for both Short Espresso and Lungo buttons:

Figure 4.3: Diagram illustrating preset brew times (Short Espresso: 25s/30ml, Lungo Espresso: 47s/60ml) and custom brew time options (15s-90s, 0-300ml) for the HIBREW H1A coffee machine.

1. Ensure the machine is preheated and an adapter is inserted (without a capsule for programming).
2. Place a cup under the spout.
3. Press and hold the desired brew button (Short Espresso or Lungo) until the desired volume is dispensed into the cup.
4. Release the button. The new volume is now programmed for that button.
5. To reset to factory settings, unplug the machine for 30 seconds, then plug it back in.

4.6 Automatic Shut-off

For energy efficiency and safety, the HIBREW H1A features an automatic shut-off function. The machine will automatically turn off after 15 minutes of inactivity.

5. Cleaning and Maintenance

Regular cleaning ensures optimal performance and extends the lifespan of your coffee machine.

5.1 Daily Cleaning

• Water Tank: Empty and rinse the water tank daily. Refill with fresh water before each use.
• Drip Tray: Empty and clean the drip tray after each use or when the indicator shows it's full. Wash with warm, soapy water and rinse thoroughly.
• Capsule Adapters: Remove and rinse the used capsule adapter after each brew. For ground coffee, discard used grounds and rinse the adapter.
• Exterior: Wipe the exterior of the machine with a soft, damp cloth. Do not use abrasive cleaners or immerse the machine in water.

5.2 Descaling

Over time, mineral deposits (limescale) can build up in your machine, affecting performance and coffee taste. Descale your machine every 2-3 months, or more frequently if you have hard water.

1. Empty the water tank and drip tray.
2. Fill the water tank with a descaling solution (follow the descaler manufacturer's instructions) or a mixture of white vinegar and water (1:1 ratio).
3. Place a large container under the coffee spout.
4. Turn on the machine and allow it to preheat.
5. Run several Lungo cycles until the water tank is empty.
6. Rinse the water tank thoroughly and fill it with fresh water.
7. Run several Lungo cycles with fresh water to rinse out any remaining descaling solution.

6. Troubleshooting

If you encounter issues with your HIBREW H1A, refer to the following table for common problems and solutions.

7. Technical Specifications

Detailed technical information for the HIBREW H1A coffee machine.

Figure 7.1: The compact design of the HIBREW H1A coffee machine, showing its dimensions (26cm depth, 11cm width, 26cm height) and the 600ml BPA-free water tank. It also indicates a maximum cup height of 9.6cm.

• Brand: HIBREW
• Model Number: ST504-B
• Color: Black
• Product Dimensions (L x W x H): 26 x 11 x 26 cm
• Item Weight: 2.7 Kilograms
• Capacity: 600 Milliliters (Water Tank)
• Power: 1450 Watts
• Voltage: 220 Volts
• Material: Plastic
• Automatic Shut-off Function: Yes (after 15 minutes)
• Special Feature: Automatic Shut-off, Programmable, Removable Water Tank
• Coffee Maker Type: Espresso Machine
• Pressure: 19 Bars
• Recommended Uses: Office, Kitchen, Living Room
• Specific Uses for Product: Iced Coffee, Cappuccino, Espresso, Latte, Mocha

8. Warranty and Customer Support

For warranty information, please refer to the documentation provided with your purchase or visit the official HIBREW website. If you require technical assistance or have questions not covered in this manual, please contact HIBREW customer support through their official channels.