TEYES CC3 2K Car Radio Multimedia Navigation System User Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your TEYES CC3 2K Car Radio Multimedia Navigation System. Designed specifically for Mazda 3 II (BL) models from 2009 to 2013, this head unit offers advanced features including a 2K in-cell display, Android 10 operating system, GPS navigation, and comprehensive multimedia capabilities. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact your vendor.

• 1x TEYES CC3 2K Head Unit
• 1x OEM Panel (Frame for Mazda 3 II BL)
• 1x USB Cable
• 1x GPS Antenna
• 1x AUX Cable
• 1x 4G WiFi Antenna
• 1x Power Cable
• 1x AHD 1080p Rear Camera
• 1x Audio & Video Harness + RCA cables
• 1x Screws & Screwdriver
• 1x Cleaning Cloth
• 1x Wiring Diagram
• 1x Electronic Instruction (e-book)

Figure 1: Overview of the TEYES CC3 2K package contents.

Figure 2: OEM Panel (Frame) designed for Mazda 3 II BL 2009-2013.

Important Compatibility Note

Please be aware of specific vehicle configurations. If your Mazda 3 II (BL) has a particular plug type (as shown in Figure 3), it may not support the original small screen display functionality after installing the TEYES CC3 2K head unit.

Figure 3: Example of a specific plug type and original small screen display that may not be supported.

Installation and Setup

Professional installation is highly recommended for this product to ensure correct wiring and optimal performance. Refer to the included wiring diagram and electronic instruction manual (e-book) for detailed, vehicle-specific installation steps.

General Installation Steps:

1. Preparation: Disconnect the vehicle's battery before starting any electrical work.
2. Remove Original Unit: Carefully remove the factory radio and trim panels from your Mazda 3 II (BL).
3. Connect Wiring: Connect the provided power cable, USB cable, GPS antenna, AUX cable, and 4G WiFi antenna to the TEYES CC3 2K head unit. Refer to the wiring diagram for correct connections.
4. Install Rear Camera: If installing the AHD 1080p rear camera, route its cable to the head unit and connect it according to the instructions.
5. Mount Head Unit: Secure the TEYES CC3 2K head unit into the OEM panel and then into the vehicle's dashboard opening.
6. Test Functionality: Reconnect the vehicle's battery and power on the unit to test all functions (radio, navigation, touch screen, steering wheel controls, camera, etc.) before fully reassembling the dashboard.
7. Final Assembly: Reinstall all trim panels.

Figure 4: TEYES CC3 2K head unit installed in a Mazda 3 II (BL).

Operating Instructions

Power On/Off and Basic Navigation:

Press the power button on the unit's side panel or the vehicle's ignition to turn the system on or off. The Android 10 operating system provides a familiar touchscreen interface. Navigate through applications and settings using touch gestures.

Steering Wheel Control:

The TEYES CC3 2K supports integration with your vehicle's original steering wheel buttons. This allows for convenient control of volume, track changes, and other functions without taking your hands off the wheel. Configuration may be required in the system settings.

Figure 5: Steering wheel controls for convenient operation.

USB Connectivity:

The unit provides multiple USB outputs for data transfer, allowing connection of USB drives for media playback or other compatible devices. Ensure proper connection for stable data transfer.

Figure 6: Multiple USB outputs for data transfer.

Split Screen Mode:

Utilize the split-screen feature to run two applications simultaneously, such as navigation on one side and multimedia playback on the other. This enhances multitasking and user convenience.

Figure 7: Split screen mode displaying navigation and video simultaneously.

Radio Functionality:

Access local radio stations with the integrated radio tuner. The system supports RDS (Radio Data System) for enhanced information display where available.

Figure 8: Radio interface for tuning into local stations.

Advanced Audio Features

Dual DSP Audio Processing:

The TEYES CC3 2K features dual DSP (Digital Signal Processor) chips (ADAU1701 + ROHM32107) for superior audio processing. This allows for precise sound tuning and optimization, delivering a high-fidelity audio experience.

Figure 9: Audio playback interface, benefiting from dual DSP processing.

27-Segment Equalizer (EQ):

Fine-tune your audio output with the advanced 27-segment equalizer. This allows for detailed adjustment of frequency bands to match your personal preferences and vehicle acoustics.

Figure 10: 27-Segment Equalizer for precise audio customization.

Optical and Coaxial Digital Audio Output:

For audiophiles, the unit provides optical and coaxial digital audio outputs, allowing connection to external high-fidelity audio processors or amplifiers for an uncompromised sound experience.

Figure 11: Audio output settings, including digital options.

Sound Filtering:

Advanced sound filtering options are available to optimize audio output for different speaker configurations and listening environments, ensuring clear and balanced sound reproduction.

Figure 12: Sound filtering interface for audio optimization.

Rear View Camera Functionality

The included AHD 1080p rear camera provides real-time viewing of your vehicle's rear surroundings when reversing. The system also supports video recording from the camera, enhancing safety and providing a record of events.

Figure 13: Real-time rear view camera display with recording option.

Product Overview Video

Watch this official product video for a visual overview of the TEYES CC3 2K head unit's features and user interface.

Specifications

Figure 14: Dimensions of the 9.5-inch TEYES CC3 2K Head Unit.

Troubleshooting

If you encounter issues with your TEYES CC3 2K system, please refer to the following common troubleshooting steps:

• No Power: Check all power cable connections. Ensure the vehicle's battery is properly connected and charged.
• No Sound: Verify speaker connections. Check audio settings within the unit, including volume levels and mute status. Ensure external amplifiers (if used) are powered on.
• GPS Signal Issues: Ensure the GPS antenna is securely connected and placed in a location with a clear view of the sky (e.g., on the dashboard).
• Touchscreen Unresponsive: Try restarting the unit. If the issue persists, a factory reset might be necessary (refer to the e-book for instructions).
• Bluetooth Connection Problems: Ensure Bluetooth is enabled on both the head unit and your mobile device. Delete previous pairings and attempt to re-pair.
• Rear Camera Not Displaying: Check the camera's power and video signal connections. Ensure the vehicle is in reverse gear.
• System Lag/Freezing: Close unnecessary background applications. Clear cache if possible. A system restart often resolves temporary performance issues.

For more detailed troubleshooting, consult the electronic instruction manual (e-book) provided with your product.

Warranty and Support

Warranty Information:

The TEYES CC3 2K Car Radio Multimedia Navigation System comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by improper installation, misuse, accidents, unauthorized modifications, or natural disasters.

Please retain your proof of purchase for warranty claims.

Customer Support:

For technical assistance, warranty claims, or further inquiries, please contact your original point of purchase or visit the official TEYES website for support resources. Ensure you have your product model number (CC3 2K) and purchase details ready when contacting support.