ECONTROLLY 100075108 Sound Bar Remote Control User Manual

Introduction

This manual provides comprehensive instructions for the ECONTROLLY 100075108 replacement remote control. This remote is specifically designed to operate with the Onn 100075108 Soundbar Home Theater system.

The remote control utilizes infrared technology and does not require any programming or complex setup procedures. Simply insert the batteries, and it is ready for use.

Setup

1. Battery Installation

Locate the battery compartment on the back of the remote control.
Slide open the battery compartment cover.
Insert two (2) AAA ALKALINE batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
Close the battery compartment cover securely.

Important: Only use AAA ALKALINE batteries. Do not use rechargeable batteries, as they may not provide sufficient power or could damage the remote control.

Back view of ECONTROLLY 100075108 remote control showing the battery compartment

Image: Back view of the remote control, illustrating the location of the battery compartment for AAA ALKALINE battery installation.

Operating Instructions

To operate the soundbar, point the remote control directly towards the Onn 100075108 Soundbar. Ensure there are no obstructions between the remote and the soundbar's infrared receiver.

Front view of ECONTROLLY 100075108 remote control with all buttons visible

Image: Front view of the remote control, displaying all functional buttons for operating the soundbar.

Button Functions:

Power Button (⏻): Turns the soundbar on or off.
Input/Source Button (⎘): Cycles through available input sources (e.g., HDMI, Optical, AUX).
Bluetooth Button (Ⓑ): Activates or deactivates Bluetooth pairing mode.
Volume Up (+) / Down (-): Adjusts the soundbar's volume level.
Play/Pause (▶‖): Plays or pauses media playback.
Skip Forward (⏭) / Skip Backward (⏮): Skips to the next or previous track/chapter.
MOVIE: Activates Movie sound mode for enhanced cinematic audio.
SOUND MODE: Cycles through various sound modes (e.g., Music, News, Standard).
DIMMER: Adjusts the brightness of the soundbar's display lights.
Brightness/Light Button (☀): Controls specific lighting features or display brightness.
Mute Button (🔇): Mutes or unmutes the soundbar's audio output.

Maintenance

Cleaning the Remote Control:

Wipe the remote control with a soft, dry cloth.
Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the remote's surface or internal components.

Battery Care:

Replace batteries when the remote's responsiveness decreases.
If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage.
Dispose of used batteries according to local regulations.

Troubleshooting

Problem	Possible Cause	Solution
Remote control is not working.	Batteries are depleted or incorrectly installed. Obstruction between remote and soundbar. Remote is out of range.	Replace batteries with new AAA ALKALINE batteries, ensuring correct polarity. Remove any objects blocking the line of sight to the soundbar's infrared receiver. Move closer to the soundbar.
Some functions are not responding.	Soundbar is not compatible. Specific function not supported by soundbar.	Ensure your soundbar is the Onn 100075108 model. Refer to your soundbar's original manual for supported functions.

Specifications

Model	100075108
Brand	ECONTROLLY
Compatible Devices	Onn 100075108 Soundbar Home Theater
Connectivity Technology	Infrared (IR)
Special Feature	Pre-Programmed (No setup required)
Batteries Required	2 x AAA ALKALINE batteries (not included)
Product Dimensions	3.94 x 1.57 x 0.59 inches (approx.)
Item Weight	1.06 ounces (approx.)
Color	Black

Support

For any questions, concerns, or assistance regarding your ECONTROLLY 100075108 remote control, please contact the manufacturer or seller through the platform where the product was purchased.

Please have your product model number (100075108) available when contacting support.