Maxxima LED Outdoor Wall Light Instruction Manual

1. Introduction

Thank you for purchasing the Maxxima LED Outdoor Wall Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read this manual thoroughly before beginning installation and retain it for future reference.

Image: The Maxxima LED Outdoor Wall Light, featuring a black frame with wood grain style accents and clear hammered glass.

2. Safety Information

WARNING: Risk of Electric Shock. Disconnect power at the fuse or circuit breaker before installing or servicing.

• Always turn off the power supply at the main circuit breaker before installation or maintenance.
• Consult a qualified electrician if you are not familiar with electrical installations.
• This fixture is designed for 120VAC / 60Hz operation.
• Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
• Ensure all connections are secure and properly insulated.
• This product is suitable for damp locations and outdoor use only.

3. Package Contents

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact Maxxima customer support immediately.

• LED Outdoor Wall Light Fixture (1)
• Mounting Hardware Kit (screws, wire nuts, mounting plate)
• Dusk to Dawn Sensor Cap (optional)
• Instruction Manual (this document)

4. Specifications

Image: Detailed dimensions of the Maxxima LED Outdoor Wall Light, showing height, width, and depth.

5. Setup and Installation

This fixture is designed for wall-mount installation and requires hardwiring. It is recommended that installation be performed by a qualified electrician. If you are performing a DIY installation, ensure you follow all local electrical codes and safety guidelines.

Installation Steps:

1. Turn Off Power: Before starting, ensure the power to the junction box is turned off at the circuit breaker or fuse box.
2. Prepare Wiring: Pull the electrical wires from the junction box.
3. Attach Mounting Plate: Secure the mounting plate to the junction box using the provided screws. Ensure the plate is level and firmly attached.
4. Connect Wires:
   • Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut.
   • Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
   • Connect the green or bare copper (ground) wire from the fixture to the green or bare copper (ground) wire from the junction box using a wire nut.

   Ensure all wire connections are secure and insulated.

5. Mount Fixture: Carefully tuck the wires into the junction box. Align the fixture with the mounting plate and secure it with the provided screws.
6. Dusk to Dawn Sensor: The fixture includes an integrated photocell sensor for automatic dusk to dawn operation. If you prefer to disable this feature and control the light with a wall switch, you can install the included sensor cap over the photocell.
7. Restore Power: Once the fixture is securely mounted and all connections are made, restore power at the circuit breaker.

Image: Visual representation of the fixture's features: black frame, wood grain finish, hammered glass, fully integrated LED, and the dusk to dawn photocell sensor with optional cap.

Image: The outdoor wall light installed on a home, illuminating the entrance area.

6. Operating Instructions

The Maxxima LED Outdoor Wall Light is equipped with a built-in Dusk to Dawn (photocell) sensor for automatic operation.

• Automatic Operation: The light will automatically turn on when it detects low light conditions (dusk) and turn off when it detects sufficient ambient light (dawn).
• Manual Control (Optional): If you wish to override the dusk to dawn sensor and control the light with a standard wall switch, place the included sensor cap over the photocell located on the top of the fixture. This will prevent the sensor from detecting light, allowing the fixture to be controlled by the external switch.

Image: The outdoor wall light in an illuminated state, showcasing its warm white glow.

7. Maintenance

The Maxxima LED Outdoor Wall Light is designed for long-lasting performance with minimal maintenance.

• Cleaning: To clean the fixture, ensure power is off. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or glass.
• No Bulb Replacement: This fixture features integrated LED technology, meaning there are no bulbs to replace. The LEDs are designed to last for the lifetime of the fixture (up to 50,000 hours).
• Inspection: Periodically inspect the fixture for any signs of damage or wear, especially to the wiring and mounting.

8. Troubleshooting

If you encounter issues with your Maxxima LED Outdoor Wall Light, please refer to the following common problems and solutions:

9. Warranty and Support

The Maxxima LED Outdoor Wall Light (Model MEL-12275W) comes with a 3-year warranty from the date of purchase, covering defects in materials and workmanship.

For warranty claims, technical support, or any questions regarding your product, please contact Maxxima customer service:

• Website: Visit the official Maxxima website for support resources and contact information.
• Contact: Refer to the contact details provided on the product packaging or the Maxxima website.

Please have your model number (MEL-12275W) and proof of purchase ready when contacting support.