Ledwood XTREM140 Portable Bluetooth Speaker User Manual

Introduction

Thank you for choosing the Ledwood XTREM140 Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your device. The XTREM140 is a robust, portable speaker designed for various environments, featuring IPX5 water resistance and True Wireless Stereo (TWS) functionality for an enhanced audio experience.

Please read this manual thoroughly before using the speaker to ensure proper function and longevity of the product.

What's in the Box

Upon unpacking, please ensure all the following items are present:

• Ledwood XTREM140 Portable Bluetooth Speaker
• USB-C Charging Cable
• 3.5mm AUX Audio Cable
• User Manual (this document)

Product Overview

Familiarize yourself with the speaker's components and controls.

Image 1: Front view of the Ledwood XTREM140 speaker, highlighting the control panel with buttons for power, volume, play/pause, and mode selection, along with USB and AUX ports.

Image 2: Exploded view of the Ledwood XTREM140 speaker, illustrating its internal speaker drivers and passive radiators, demonstrating its robust acoustic design.

Control Panel Functions:

• Power Button: Press and hold to turn the speaker ON/OFF.
• Play/Pause Button: Press to play or pause audio.
• Volume Up (+): Short press to increase volume. Long press for next track.
• Volume Down (-): Short press to decrease volume. Long press for previous track.
• Mode Button (M): Press to switch between Bluetooth, AUX, and USB playback modes.
• TWS Button: Press to activate True Wireless Stereo pairing (see Operating section).

Ports:

• USB Port: For USB drive playback.
• AUX Port (3.5mm Jack): For wired audio connection.
• USB-C Charging Port: For charging the speaker's internal battery.

Setup

1. Charging the Speaker

1. Connect the supplied USB-C charging cable to the speaker's USB-C port.
2. Connect the other end of the cable to a compatible USB power adapter (not included) or a computer's USB port.
3. The charging indicator light will illuminate. It will turn off or change color once fully charged.
4. A full charge provides approximately 6 hours of playback time.

2. Bluetooth Pairing

1. Ensure the speaker is fully charged.
2. Press and hold the Power button to turn on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED light.
3. On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
4. Select "XTREM140" from the list of devices.
5. Once successfully paired, the speaker will emit a confirmation sound, and the LED light will stop flashing.
6. You can now play audio from your device through the speaker.

3. AUX Connection

1. Connect one end of the 3.5mm AUX audio cable to the speaker's AUX port.
2. Connect the other end to the audio output jack of your device (e.g., MP3 player, computer).
3. Press the Mode button on the speaker until it switches to AUX mode.
4. Audio will now play through the wired connection.

Operating Instructions

Basic Functions

• Power ON/OFF: Press and hold the Power button for 2-3 seconds.
• Play/Pause: Short press the Play/Pause button.
• Volume Control: Short press the "+" button to increase volume, short press the "-" button to decrease volume.
• Next Track: Long press the "+" button.
• Previous Track: Long press the "-" button.
• Change Mode: Short press the "M" (Mode) button to cycle through Bluetooth, AUX, and USB modes.

True Wireless Stereo (TWS) Pairing

The TWS function allows you to connect two XTREM140 speakers wirelessly for a stereo sound experience.

1. Ensure both XTREM140 speakers are powered off.
2. Turn on both speakers. They will enter Bluetooth pairing mode.
3. On one of the speakers, short press the TWS button. This speaker will now search for the other XTREM140 speaker.
4. Once connected, both speakers will emit a confirmation sound, and their LED indicators will synchronize.
5. Now, connect your mobile device to the primary speaker (the one you pressed the TWS button on) via Bluetooth as described in the "Bluetooth Pairing" section.
6. Audio will now play in stereo across both speakers.

Maintenance

Water Resistance (IPX5)

The Ledwood XTREM140 speaker is rated IPX5, meaning it is protected against low-pressure water jets from any direction. This makes it suitable for outdoor use and resistant to splashes or light rain. It is not designed to be submerged in water. Ensure the charging port and AUX port covers are securely closed when exposed to water.

Cleaning

• Always power off the speaker before cleaning.
• Use a soft, dry, lint-free cloth to wipe the speaker's surface.
• Do not use abrasive cleaners, alcohol, benzene, or other chemical solvents, as these may damage the speaker's finish or internal components.

Storage

When not in use for extended periods, store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to charge the battery periodically to maintain its health.

Troubleshooting

If you encounter any issues with your Ledwood XTREM140 speaker, please refer to the following common problems and solutions:

• Speaker does not power on:
  Ensure the battery is charged. Connect the speaker to a power source using the USB-C cable and try again after a few minutes.
• No sound:
  Check if the speaker is powered on and connected via Bluetooth or AUX. Ensure the volume on both the speaker and your connected device is turned up. Verify that the correct input mode (Bluetooth/AUX/USB) is selected on the speaker.
• Bluetooth connection is unstable or disconnects:
  Ensure the speaker and your device are within the effective Bluetooth range (typically 10 meters) and there are no significant obstacles between them. Try unpairing and re-pairing the speaker with your device.
• TWS pairing fails:
  Ensure both speakers are XTREM140 models and are powered on. Make sure neither speaker is already connected to another Bluetooth device. Follow the TWS pairing steps carefully, ensuring you initiate pairing on only one speaker.
• Poor audio quality:
  If using Bluetooth, ensure your device is close to the speaker. If using AUX, try a different 3.5mm cable. Check the audio source for quality issues.

Specifications

Warranty Information

The Ledwood XTREM140 speaker comes with a standard manufacturer's warranty. Specific details regarding the warranty period and terms are typically provided at the point of purchase or can be found on the official Ledwood website. Please retain your proof of purchase for any warranty claims.

Support

For further assistance, technical support, or inquiries not covered in this manual, please visit the official Ledwood website or contact their customer service department. Contact information can usually be found on the product packaging or the brand's website.

Ledwood Official Website: Visit Ledwood Store on Amazon