Midea MLTW37A1BWW
Midea MLTW37A1BWW Agitator Machine User Manual
Model: MLTW37A1BWW | Brand: Midea
Introduction
This user manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Midea MLTW37A1BWW Agitator Top Load Washer. Please read this manual thoroughly before using the appliance and retain it for future reference.

Front view of the Midea MLTW37A1BWW Agitator Top Load Washer.
Setup and Installation
Unpacking and Packing List
Carefully unpack the washing machine and ensure all components are present. Refer to the packing list below:

The packing list includes the washer unit, user manual, drain hose, two clamps, a drain hose guide, and two filters. Please note that the water inlet hose is not included and must be purchased separately.
Placement and Dimensions
Ensure adequate space for installation and operation. The washer is designed for freestanding installation.

Machine Dimensions: 25.2"W x 27"D x 42.2"H. Installation Dimensions: 27.2"W x 34"D x 66.2"H.
Connecting Water and Power
Connect the washer to a 120 Volt power supply. Ensure proper water supply connections are made. The appliance requires an inlet hose (not included) for water connection.
Operating Instructions
Control Panel Overview

The washer features a user-friendly dial control panel for effortless cycle tracking and a soft-close glass lid for safe and quiet operation.
Loading the Washer
The 3.7 Cu. Ft. capacity allows for significant loads, saving time and energy. The transparent lid allows you to view the laundry during the cycle.

Examples of load capacity: up to 33 T-shirts, 16 coats, 10 pairs of pants, 13 dresses, 10 bath towels, or 13 bed sheets.
Wash Cycles and Features
The Midea MLTW37A1BWW offers 12 pre-set wash cycles designed for maximized cleaning performance. Key features include:
- Load Sensing Technology: A sensor automatically determines load volume and adjusts the water level and cycle time for optimal wash efficiency.
- POWER BOOST AGITATOR: The heightened agitator and enlarged impeller rotate 360° to generate powerful water flows, significantly improving washing performance.
- DEEP CLEAN 360° Treatment: Powerful water flows and the innovative Water Cube Tub ensure heavy clothes and blankets are thoroughly cleaned.
- Stainless Steel Tub: The durable stainless steel tub is designed to be gentler on fabrics and built for longevity.
- Child Lock: Keep your children safe and secure with the Child Lock function (long press for 3 seconds to activate).
- No Angular Design: The round-corner design helps prevent potential dangers and injuries.

The Auto Sensing feature conveniently weighs the load and matches the water level accordingly, saving time and effort.

The Power Boost Agitator creates strong multi-directional water flows for effective deep cleaning.

The Deep Clean system utilizes rotating, pushing, and lifting water flows to remove stains effectively.

Close-up view of the durable stainless steel tub interior.

Safety features include a no-angular design and a child lock function.
Official Product Videos
Midea MA500 Washing Machine Promotion
This video provides an overview of the Midea MA500 series, showcasing its design and features, including the agitator washer and tumble dryer set.
Top Load Washer - Water Plus Feature
This video demonstrates the "Water Plus" feature, which allows for adding an additional level of water based on user needs to optimize water usage and improve washing effects.
Maintenance
Tub Clean Function
The washer features a Tub Clean function to maintain a fresh and healthy washing environment. Hot water flushes between the inner and outer drums throughout the self-clean process, removing lint and residues.

The Tub Clean feature uses hot water to flush out lint and residue, ensuring a clean washing environment. It is suggested to clean the tub about once a month.
General Cleaning
For general cleaning, wipe down the exterior with a soft, damp cloth. Avoid abrasive cleaners.
Troubleshooting
For common issues, please refer to the comprehensive troubleshooting guide in the full user manual. If problems persist, contact Midea customer support.
- Washer not starting: Check power connection, ensure lid is closed securely, and verify cycle selection.
- Excessive vibration: Ensure the washer is level and the load is balanced.
- Water not draining: Check for kinks in the drain hose and ensure the drain is not clogged.
Specifications
| Feature | Detail |
|---|---|
| Brand | Midea |
| Model Number | MLTW37A1BWW |
| Capacity | 3.7 Cubic Feet |
| Item Weight | 114.4 pounds |
| Product Dimensions | 27 x 25.2 x 42.2 inches |
| Color | White |
| Material | Stainless Steel, Plastic |
| Voltage | 120 Volts |
| Installation Method | Freestanding |
| Sound Level | 64 dB |
| Special Feature | Portable |
| Included Components | User Manual, Inlet Hose Filter, Drain Hose Support |
Warranty and Support
Warranty Information
The Midea MLTW37A1BWW Agitator Machine comes with a One Limited Year Warranty from the original purchase date.
Customer Support
For technical assistance, warranty claims, or general inquiries, please contact Midea customer support. Refer to the contact information provided in your product packaging or visit the official Midea website.
You can also visit the Midea Store on Amazon for more information and related products.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







