1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Faber Hood Sunny In Hc Sc Fl Lg 60 kitchen chimney. Please read these instructions carefully before installation and use, and retain them for future reference.
2. Safety Information
To ensure safe operation and prevent damage, observe the following safety precautions:
- Ensure the electrical supply matches the voltage specified on the rating label.
- Installation must be performed by a qualified technician in accordance with local regulations.
- Do not operate the chimney without proper ventilation in the room.
- Keep children away from the appliance during operation and cleaning.
- Do not flambé under the range hood.
- Regularly clean the appliance to prevent grease accumulation, which can be a fire hazard.
- Disconnect the power supply before any maintenance or cleaning.
3. Product Overview
The Faber Hood Sunny In Hc Sc Fl Lg 60 is a wall-mounted kitchen chimney designed for efficient smoke and odor extraction. Key features include auto-clean functionality, a filterless design, and intuitive touch and gesture controls.
Figure 3.1: Front view of the Faber Hood Sunny In Hc Sc Fl Lg 60 kitchen chimney, showcasing its sleek black finish and control panel.
Components Included:
- 1N Kitchen Chimney Unit
- 1N User Kit (containing installation hardware and detailed instructions)
4. Setup and Installation
The Faber Hood Sunny In Hc Sc Fl Lg 60 is designed for wall-mounted installation. For optimal performance and safety, professional installation is strongly recommended.
Figure 4.1: Side view of the chimney, illustrating its wall-mounted design and overall dimensions.
Installation Guidelines:
- Ensure adequate clearance between the cooking surface and the chimney as per local safety standards.
- The chimney requires a ducted ventilation system for exhaust. Ensure proper ducting is in place.
- Refer to the detailed instructions and mounting template provided in the User Kit for precise measurements and mounting procedures.
- Verify that the wall structure can support the chimney's weight (approximately 27.5 kg).
5. Operating Instructions
Your Faber chimney features a user-friendly touch and gesture control panel for easy operation.
Figure 5.1: Close-up of the touch and gesture control panel, showing power, speed, light, and auto-clean buttons.
Basic Operation:
- Power On/Off: Touch the power symbol to turn the chimney on or off.
- Fan Speed Control: Use the '1', '2', '3' touch buttons or gesture control (refer to User Kit for specific gestures) to adjust the suction speed.
- Light Control: Touch the light bulb symbol to turn the 1.5W LED light on or off.
- Auto-Clean Function: Touch the auto-clean symbol to initiate the self-cleaning cycle. This function helps to melt and collect oil residues.
6. Maintenance and Cleaning
Regular maintenance ensures the longevity and efficient performance of your chimney. The filterless design simplifies cleaning.
Figure 6.1: Bottom view of the chimney, showing the filterless intake area where smoke and oil are drawn in.
Cleaning Procedures:
- Exterior Cleaning: Wipe the exterior surfaces with a soft cloth dampened with mild detergent. Avoid abrasive cleaners or scouring pads.
- Auto-Clean Cycle: Utilize the auto-clean function regularly (e.g., once a month, depending on usage) to maintain internal cleanliness. The collected oil will drain into a removable oil collector.
- Oil Collector: Periodically check and empty the oil collector. Clean it with warm soapy water.
- Filterless Design: As the chimney is filterless, there are no filters to remove and clean manually. The auto-clean function manages internal grease.
7. Troubleshooting
Before contacting customer service, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chimney does not turn on | No power supply; loose connection | Check power outlet and circuit breaker. Ensure power cord is securely plugged in. |
| Low suction power | Ducting obstruction; excessive cooking fumes | Check ducting for blockages. Ensure windows/doors are not creating negative pressure. Increase fan speed. |
| LED light not working | Faulty LED; loose connection | Check light connection. If issue persists, contact service. |
| Auto-clean not functioning | Power interruption; system error | Ensure stable power. Try restarting the chimney. If issue persists, contact service. |
If the problem persists after attempting these solutions, please contact Faber customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model | 330.0690.923 |
| Mounting Type | Wall Mount |
| Air Flow Capacity | 1200 Cubic Meters Per Hour (CMPH) |
| Filter Type | Filterless |
| Controls Type | Touch & Gesture |
| Light Source Type | LED (1.5W) |
| Material | Aluminium |
| Noise Level | 40 Decibels |
| Voltage | 230 Volts (AC) |
| Item Weight | 27.5 Kilograms |
| Product Dimensions (LxWxH) | 41D x 60W x 43H Centimeters |
| Colour | LIGHT GREY |
| Finish Type | Powder Coated |
| Manufacturer | FRANKE FABER INDIA PVT LTD |
9. Warranty and Support
Your Faber Hood Sunny In Hc Sc Fl Lg 60 kitchen chimney comes with the following warranty:
- Product Warranty: 2 years
- Motor Warranty: 12 years
For warranty claims, technical assistance, or service requests, please contact Faber customer support. Ensure you have your purchase receipt and product model number available.