EVERSOLO Mando-DMP-A6
Eversolo BTR-12 Bluetooth Remote User Manual
Model: Mando-DMP-A6
Brand: EVERSOLO
Introduction
The Eversolo BTR-12 Bluetooth Remote is designed to provide convenient control over your Eversolo DMP series devices, including DMP-A6, DMP-A6 Master, DMP-A6 Gen 2, DMP-A6 Master Gen 2, and Eversolo Play Series. This manual provides detailed instructions for setup, operation, and maintenance of your remote control.
Safety Information
- Keep the remote control away from water and excessive moisture.
- Avoid dropping or subjecting the remote to strong impacts.
- Do not attempt to disassemble or modify the remote control.
- Dispose of used batteries responsibly according to local regulations.
- Ensure proper battery polarity when inserting new batteries.
Package Contents
Please check the package for the following items:
- Eversolo BTR-12 Bluetooth Remote Control
- (Batteries are not included and must be purchased separately. Requires 2 AAA batteries.)
Image: Front view of the Eversolo BTR-12 Bluetooth Remote packaging box, displaying the remote's design and model number.
Product Overview
The Eversolo BTR-12 remote features a minimalist design with essential controls for your audio streamer.
Image: An angled perspective of the Eversolo BTR-12 Bluetooth Remote, highlighting its sleek design and accessible buttons.
Image: A direct top-down view of the Eversolo BTR-12 Bluetooth Remote, detailing the layout and icons of its control buttons.
Button Functions:
| Button Icon | Function | Description |
|---|---|---|
| ⏸ | Power On/Off | Turns the connected Eversolo device on or off. Operates via IR mode. |
| ↺ | Source / Input | Cycles through available input sources. |
| ℹ | Info | Displays information about the current track or system status. |
| ⏮ | Previous Track | Skips to the beginning of the current track or the previous track. |
| ⏸ | Play / Pause | Toggles playback between play and pause. |
| ⏭ | Next Track | Skips to the next track. |
| ▶ | Play Mode | Cycles through different playback modes (e.g., repeat, shuffle). |
| 👁 | Screen On/Off | Toggles the display screen of the connected device. |
| 🔇 | Mute | Mutes or unmutes the audio output. |
| FN | Function Key | Reserved for future functions or custom assignments. |
| + | Volume Up | Increases the volume level. |
| - | Volume Down | Decreases the volume level. |
Setup
1. Battery Installation
The Eversolo BTR-12 remote requires two (2) AAA batteries (not included). To install:
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards to open the compartment.
- Insert two AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
- Slide the cover back into place until it clicks securely.
Image: Rear view of the Eversolo BTR-12 Bluetooth Remote, displaying the battery compartment and printed pairing instructions.
2. Bluetooth Pairing
To pair the BTR-12 remote with your Eversolo DMP device:
- Ensure your Eversolo DMP device is powered on and within 30 cm (approximately 12 inches) of the remote control.
- Simultaneously press and hold the Info (i) button and the Volume Down (-) button on the remote.
- Continue holding until the indicator light on the remote begins to blink, signifying that pairing mode is active.
- The remote should automatically pair with your Eversolo DMP device. Once paired, the indicator light will stop blinking.
Important Note: The Power key on the remote operates via IR (Infrared) mode, not Bluetooth. Ensure there is a clear line of sight between the remote and your DMP device for the power function to work correctly.
3. Antenna Installation (for DMP device)
For optimal Bluetooth performance, ensure the antenna on your Eversolo DMP device is correctly installed. Refer to your DMP device's user manual for specific antenna installation instructions.
Operating Instructions
Once paired, the Eversolo BTR-12 remote allows you to control various functions of your compatible Eversolo DMP device. Simply press the corresponding button for the desired action as described in the "Product Overview" section.
- Power On/Off: Use the power button to turn your device on or off. This function uses IR.
- Volume Control: Use the '+' and '-' buttons to adjust the audio volume.
- Playback Control: Use the Play/Pause, Previous Track, and Next Track buttons to manage media playback.
- Source Selection: The Source button allows you to switch between different audio inputs.
- Screen Control: The Screen On/Off button can toggle the display of your DMP device.
Maintenance
Cleaning the Remote
To clean your remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these may damage the surface or internal components.
Battery Replacement
When the remote's performance degrades or it stops responding, it's likely time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding. | Low or dead batteries. | Replace with new AAA batteries. |
| Remote not responding. | Not paired with the device. | Follow the Bluetooth pairing instructions. |
| Power button not working. | No clear line of sight for IR signal. | Ensure the remote is pointed directly at the DMP device and there are no obstructions. |
| Intermittent control. | Antenna on DMP device not properly installed or loose. | Check the antenna connection on your DMP device. |
| Remote indicator light not blinking during pairing. | Buttons not pressed simultaneously or held long enough. | Ensure you press and hold both the Info (i) and Volume Down (-) buttons simultaneously until the light blinks. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | Mando-DMP-A6 |
| Product Dimensions | 6.1 x 1.54 x 0.56 inches |
| Item Weight | 2.39 ounces |
| Color | Black |
| Compatible Devices | Eversolo DMP-A6, DMP-A6 Master, DMP-A6 Gen 2, DMP-A6 Master Gen 2, Eversolo Play Series |
| Power Source | 2 x AAA Batteries (not included) |
| Connectivity | Bluetooth (for most functions), Infrared (IR) for Power On/Off |
Warranty and Support
Eversolo promises a 12-month after-sales service for its products.
For any comments, questions, or support inquiries, please contact Eversolo through their official service channels:
- Official Website Forum
- Email (refer to Eversolo's official website for specific contact details)
Expect a prompt response from the support team.
Related documentsMando-DMP-A6
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.