1. Introduction
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Relaxdays Valet Stand, Model 10046888. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of the product. Keep this manual for future reference.
2. Safety Instructions
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assemble the valet stand on a soft, clean surface to prevent scratches.
- Tighten all screws and fasteners securely, but do not overtighten.
- Do not exceed the maximum load capacity of 8 kg (17.6 lbs) to prevent tipping or damage.
- Keep small parts and packaging materials away from children and pets to avoid choking hazards.
- Place the valet stand on a flat, stable surface to ensure stability.
- This product is designed for indoor use only.
3. Package Contents
Verify that all components listed below are included in your package:
- 1x Valet Stand (in individual parts)
- Assembly Materials (screws, wrench, etc.)
- Instruction Manual (this document)
Figure 3.1: Exploded view of the valet stand components and overall dimensions.
4. Setup & Assembly
Follow these steps to assemble your Relaxdays Valet Stand:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent damage.
- Attach Base: Identify the base plate and the main vertical support pole. Securely attach the main support pole to the base using the provided screws and tools. Ensure it is firmly connected and stable.
- Install Trouser Rail: Locate the horizontal trouser rail. Attach it to the main vertical support at the designated height using the appropriate fasteners.
- Mount Jacket Hanger: Position the curved jacket hanger at the top of the main vertical support. Secure it in place with the remaining screws.
- Final Check: Once all components are assembled, gently shake the stand to ensure all connections are secure and the stand is stable. Retighten any loose fasteners if necessary.
Figure 4.1: Detail of the joint, illustrating the secure connection points for assembly.
Figure 4.2: The wide, curved hanger designed to support jackets and coats without creasing.
5. Operating Instructions
The Relaxdays Valet Stand is designed to keep your garments organized and wrinkle-free. Follow these guidelines for optimal use:
- Jacket/Coat Hanger: Use the wide, curved top hanger for jackets, coats, shirts, or blouses. The design helps maintain the garment's shape and prevents shoulder bumps.
- Trouser Rail: Drape trousers, skirts, or scarves over the horizontal rail. Ensure garments are evenly distributed to prevent slipping and maintain balance.
- Load Capacity: Do not exceed the maximum load capacity of 8 kg (17.6 lbs). Overloading can compromise the stand's stability and lead to damage.
- Placement: Position the valet stand in your bedroom, dressing room, or hallway for convenient access. Ensure it is placed on a level surface.
Figure 5.1: The valet stand in use, demonstrating its function in an organized living space.
Figure 5.2: Another view of the valet stand in a bedroom, showcasing its practical use for daily garments.
6. Maintenance
Proper care will ensure the longevity and appearance of your valet stand:
- Cleaning: Wipe the metal and MDF surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
- Dusting: Regularly dust the stand to prevent buildup.
- Check Fasteners: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Avoid Moisture: Do not expose the valet stand to excessive moisture or direct sunlight, which can cause warping or discoloration of the MDF components.
7. Troubleshooting
If you encounter any issues with your valet stand, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand is wobbly or unstable. | Loose fasteners or uneven surface. | Ensure all screws are tightened. Move the stand to a flat, level surface. |
| Parts do not fit together. | Incorrect orientation or manufacturing defect. | Review assembly instructions carefully. If parts are defective, contact customer support. |
| Garments slip off the hanger/rail. | Smooth fabric or uneven weight distribution. | Distribute weight evenly. Consider using hangers with non-slip surfaces if needed. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 10046888 |
| Brand | Relaxdays |
| Dimensions (H x W x D) | 107 x 47.5 x 20 cm (42.13" H x 18.7" W x 7.87" D) |
| Trouser Rail Dimensions (H x W x D) | Approx. 85 x 39 x 13 cm (from product description) |
| Material | 60% Steel, 40% Fibreboard (MDF) |
| Color | Black/Natural |
| Load Capacity | Max. 8 kg (17.6 lbs) |
| Item Weight | 3.91 kg (8.6 lbs) |
| Installation Type | Free Standing |
| Assembly Required | Yes |
Figure 8.1: Detail of the curved MDF element, highlighting the material and finish.
9. Support & Warranty
For any questions, missing parts, or issues not covered in this manual, please contact Relaxdays customer support. Please have your model number (10046888) ready when contacting support.
Information regarding specific warranty terms and conditions can typically be found on the manufacturer's official website or through your point of purchase.
