Product Overview
The Reality Padella LED Ceiling Light is a modern lighting fixture designed for indoor use, primarily in living spaces. It features an energy-efficient integrated LED light source, offering warm white illumination at 3000 Kelvin and 3000 lumens. Its unique design allows for dimming functionality directly via a conventional wall switch, eliminating the need for an external dimmer.
Figure 1: Front view of the Reality Padella LED Ceiling Light.
Figure 2: The Padella ceiling light installed, showcasing its modern design.
Safety Information
- Always disconnect power before installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician in accordance with local electrical codes.
- This product is designed for indoor use only (IP20 rating). Do not expose to moisture or direct water.
- Do not attempt to modify the product. Any modifications may void the warranty and pose a safety risk.
- The integrated LED light source is not user-replaceable. This luminaire contains a light source of energy efficiency class G.
- Ensure the mounting surface can support the weight of the fixture (approx. 749g).
Package Contents
Verify that all components are present before beginning installation.
- Reality Padella LED Ceiling Light Fixture (1x)
- Mounting Hardware (screws, wall anchors)
- Instruction Manual (this document)
Setup and Installation
Follow these steps carefully to ensure proper and safe installation.
- Preparation: Turn off the main power supply at the circuit breaker before starting any electrical work. Ensure the power is completely off.
- Mounting Location: Choose a suitable location on the ceiling, ensuring it is structurally sound and free from obstructions.
- Marking: Use the mounting bracket (if separate) or the fixture itself as a template to mark the drilling points on the ceiling.
- Drilling: Drill holes at the marked points. Insert appropriate wall anchors if necessary.
- Wiring: Connect the electrical wires from the ceiling to the fixture's terminals. Typically, this involves connecting live (L), neutral (N), and ground (E) wires. Ensure connections are secure. Refer to local wiring codes.
- Mounting the Fixture: Secure the fixture to the ceiling using the provided screws. Ensure it is firmly attached and stable.
- Final Check: Double-check all connections and ensure the fixture is securely mounted.
- Restore Power: Turn the main power supply back on at the circuit breaker.
Figure 3: Dimensional drawing of the Padella ceiling light (Model R62642107).
Operating Instructions
The Reality Padella LED Ceiling Light features an integrated dimming function controlled by your standard wall switch.
- Turning On/Off: Use your conventional wall switch to turn the light on or off.
- Dimming Function (Switch Dimmer):
- 100% Brightness: Turn the light on (1x ON).
- 50% Brightness: Turn the light off and immediately back on (1x OFF, then 1x ON).
- 25% Brightness: Turn the light off, then on, then off, then immediately back on (2x OFF, then 1x ON).
Figure 4: How to use the switch dimming feature to adjust brightness levels.
Maintenance
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electrical components.
- Bulb Replacement: The LED light source is integrated and not designed for user replacement. If the LED fails, the entire fixture may need to be replaced.
- Disassembly for Inspection: This product is designed to be disassembled for separate verification of the light source(s) by qualified personnel, as per regulatory requirements. Do not attempt this unless you are a qualified professional.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Loose wiring connection. Faulty switch. | Check circuit breaker. Ensure all wires are securely connected (with power off). Test or replace the wall switch. |
| Light flickers or dims unexpectedly. | Unstable power supply. Loose connection. Incompatible dimmer (though not required for this model). | Consult an electrician to check household wiring. Check wiring connections. Ensure no external dimmer is used, as it's not needed. |
| Dimming function does not work. | Incorrect switch sequence. Faulty internal component. | Review "Operating Instructions" for correct switch dimming sequence. If problem persists, contact customer support. |
Specifications
| Attribute | Value |
|---|---|
| Brand | RL LIVE YOUR LIGHT |
| Model Number | R62642107 |
| ASIN | B0C78DTS94 |
| Dimensions (L x W x H) | 63.5 cm x 37.0 cm x 7.5 cm (25.0 in x 14.6 in x 3.0 in) |
| Weight | 749 g (1.65 lbs) |
| Material | Metal (Antique Nickel finish) |
| Light Source | Integrated LED, SMD |
| Power Consumption | 25.0 Watt |
| Color Temperature | 3000 Kelvin (Warm White) |
| Luminous Flux | 3000 Lumens |
| Average Lifespan | 30,000 hours |
| Dimmable | Yes, via conventional wall switch (Switch Dimmer) |
| IP Rating | IP20 (Indoor use only) |
| Energy Efficiency Class | G |
| Country of Origin | China |
Figure 5: Energy Efficiency Label (Class G).
Recycling and Disposal
This product contains electronic components and an integrated LED light source. Do not dispose of it with general household waste. Please follow local regulations for the recycling of electrical and electronic equipment (WEEE Directive) and light sources.
- For information on recycling light bulbs, consult your local waste management authority or recycling centers.
- If the product or its light source is damaged, handle with care and follow guidelines for disposing of broken electrical components.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer, RL LIVE YOUR LIGHT. Please have your model number (R62642107) and proof of purchase ready when contacting support.
Manufacturer: Reality
Brand: RL LIVE YOUR LIGHT
Website: www.reality-leuchten.de
