Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your GLOBE Electric 1-Light Flush Mount Ceiling Light, Model 66000076. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Figure 1: GLOBE Electric 1-Light Flush Mount Ceiling Light with matte black and white opal glass dual shade.
Safety Information
WARNING: Risk of Electric Shock. Disconnect power at the fuse box or circuit breaker before installing or servicing.
- Always turn off the main power supply at the circuit breaker before installation or maintenance.
- Ensure all electrical connections are in accordance with local codes, ordinances, and the National Electric Code (NEC).
- If you are unsure about wiring, consult a qualified electrician.
- Do not exceed the maximum wattage specified for the bulb. This fixture is designed for 1x E26/Medium Base 60W Bulb.
- Handle glass components with care to prevent breakage.
- This product is for indoor use only.
Package Contents
Verify that all components listed below are included in your package:
- Flush Mount Ceiling Light Fixture
- Glass Shade (White Opal)
- Mounting Hardware (screws, wire nuts, mounting plate)
- Instruction Sheet
Setup and Installation
Follow these steps for proper installation of your flush mount ceiling light. It is recommended to have a second person assist during installation for safety and ease.
- Prepare for Installation: Turn off power at the circuit breaker or fuse box to the outlet box where the fixture will be installed.
- Attach Mounting Plate: Secure the mounting plate to the electrical outlet box using the provided screws. Ensure it is firmly attached.
- Wire Connections: Connect the fixture's wires to the corresponding house wires using the provided wire nuts. Connect black to black (live), white to white (neutral), and green or bare copper to green or bare copper (ground). Ensure all connections are secure.
- Mount Fixture: Carefully align the fixture base with the mounting plate and secure it with the provided screws. Ensure no wires are pinched.
- Install Bulb: Insert one E26/Medium Base 60W maximum bulb (sold separately) into the socket.
- Attach Glass Shade: Carefully attach the white opal glass shade to the fixture according to the instruction sheet.
- Restore Power: Turn the power back on at the circuit breaker.
Figure 2: The light fixture installed in a kitchen setting, demonstrating its flush mount application.
Figure 3: The versatile fixture can also be mounted on a wall, functioning as a stylish sconce.
Operating Instructions
Your GLOBE Electric Flush Mount Ceiling Light is designed for simple operation.
- Power On/Off: Control the light using a standard wall switch connected to the fixture's circuit.
- Dimmable Functionality: This fixture is fully dimmable when used with a compatible dimmer switch (sold separately) and a dimmable E26/Medium Base bulb. This allows you to adjust the light intensity to create the desired ambiance.
- Bulb Type: Requires one E26/Medium Base 60W maximum bulb. Compatible with both LED and Incandescent bulbs.
- Smart Bulb Compatibility: For enhanced control and smart home integration, consider using a Globe Electric Smart bulb (sold separately).
Maintenance
Regular maintenance will help preserve the appearance and functionality of your light fixture.
- Cleaning: To clean the fixture, ensure power is off. Wipe the matte black metal shade and the white opal glass shade with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or polishes as they may damage the finish.
- Bulb Replacement: Before replacing the bulb, turn off the power at the circuit breaker. Allow the bulb to cool completely. Unscrew the old bulb and screw in a new E26/Medium Base 60W maximum bulb.
Troubleshooting
If you encounter issues with your light fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. | Check circuit breaker or fuse. Ensure wall switch is on. |
| Bulb is faulty or loose. | Replace bulb or tighten it in the socket. | |
| Incorrect wiring. | Turn off power and recheck wiring connections. Consult an electrician if necessary. | |
| Light flickers or dims improperly. | Incompatible dimmer switch or bulb. | Ensure both the dimmer switch and bulb are compatible with dimmable LED/incandescent fixtures. |
| Loose wiring connection. | Turn off power and check all wire connections for tightness. |
Specifications
| Brand | GLOBE |
| Model Name | Selma |
| Part Number | 66000076 |
| Color | Black, Bronze Trim |
| Material | Metal (Shade), Glass (Inner Shade) |
| Style | Industrial |
| Light Fixture Form | Close to Ceiling / Flush Mount |
| Product Dimensions | 13"L x 13"W x 7.25"H (33cm L x 33cm W x 18.5cm H) |
| Item Weight | 2.42 Pounds |
| Power Source | Hardwired |
| Voltage | 120 Volts |
| Wattage | 60 watts (max) |
| Bulb Base | E26 / Medium Base |
| Number of Light Sources | 1 |
| Special Features | Dimmable, Glass Shade, Matte Black, Wall Light Switch Compatible |
| Indoor/Outdoor Usage | Indoor |
| Certification | FCC, UL |
Figure 4: Product dimensions showing length, width, and height.
Warranty and Support
This product is manufactured by Globe Electric. According to the product specifications, there is no explicit warranty provided for this item.
For any questions, technical assistance, or to report missing parts, please contact Globe Electric customer support directly. Refer to the contact information provided on the product packaging or visit the official Globe Electric website for support details.
