1. Introduction
This manual provides instructions for the safe and efficient use of your ChiliTec 3-Outlet Corner Power Strip, Model 23630. This power strip is designed for convenient power access in various environments such as offices, kitchens, and workshops. It features a robust plastic housing and pre-wired sockets for easy installation.
Please read this manual thoroughly before installation and operation, and retain it for future reference.
2. Safety Instructions
- Ensure the power supply matches the specifications of the power strip (230V / 50Hz).
- Do not exceed the maximum load capacity of 16 A / 3600 W. Overloading can cause overheating and fire hazards.
- This device is designed for indoor use only. Do not expose it to moisture, water, or extreme temperatures.
- Do not open or modify the power strip. Repairs should only be performed by qualified personnel.
- Ensure proper grounding. The power strip is equipped with protective ground contacts.
- Keep out of reach of children.
- Before cleaning or maintenance, disconnect the power strip from the main power supply.
- Do not connect multiple power strips in series.
- Ensure adequate ventilation around the power strip during operation.
3. Setup and Installation
The ChiliTec corner power strip is designed for versatile mounting, including flush mount, surface mount, or corner installation. It features a 90° angled back housing for perfect fit under kitchen cabinets, on worktops, or desks. The sockets are pre-wired internally for ease of connection.
3.1 Package Contents
- 1 x ChiliTec 3-Outlet Corner Power Strip (Model 23630)
- Note: Mounting hardware (screws, adhesive) and connection cable are not included.
3.2 Installation Steps
- Choose Location: Select a suitable location for installation, such as a kitchen corner, under a cabinet, or on a workbench. The 90° angled design is ideal for corners.
- Prepare Wiring: Ensure the main power supply is disconnected before beginning any electrical work. Connect the power cable (not included) to the pre-wired terminals inside the power strip. Ensure all connections are secure and correctly insulated.
- Mounting:
- Screw Mounting: Use appropriate screws (not included) to secure the power strip to the desired surface. The unit can be mounted vertically or horizontally.
- Adhesive Mounting: For certain surfaces, the power strip can also be attached using suitable adhesive (not included). Ensure the surface is clean and dry for optimal adhesion.
- Secure Installation: Verify that the power strip is firmly attached and stable.
- Connect Power: Once installed, connect the power cable to the main power supply.
Image 1: Rear view of the power strip, highlighting the 90-degree angled design for corner or under-cabinet installation.
Image 2: Back view of the power strip, illustrating the internal pre-wired sockets and connection points.
Image 3: Example of the power strip mounted vertically in a kitchen corner, demonstrating its space-saving design.
4. Operation
Once the power strip is securely installed and connected to the main power supply, it is ready for use.
- Insert appliance plugs into the three available sockets. The sockets are rotated 45° for optimal use with both straight and angled plugs.
- Ensure that the total power consumption of all connected devices does not exceed 3600 W (16 A).
- The power strip provides additional outlets for kitchen appliances, radios, smartphone chargers, and other electronic devices.
Image 4: Front view of the power strip showing the three 45-degree rotated Schuko sockets.
Image 5: The power strip in a kitchen setting, demonstrating its practical application on a countertop.
5. Maintenance and Care
- Cleaning: Disconnect the power strip from the main power supply before cleaning. Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically inspect the power strip and its connections for any signs of damage, wear, or loose connections. If any damage is observed, discontinue use immediately and consult a qualified electrician.
- Storage: If the power strip is not in use for an extended period, disconnect it from the power supply.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to connected devices. |
|
|
| Power strip feels warm. |
|
|
| Loose connection or flickering power. |
|
|
If problems persist after attempting these solutions, please contact customer support or a qualified electrician.
7. Technical Specifications
| Model Number: | 23630 |
| Brand: | ChiliTec |
| Number of Sockets: | 3 (with protective ground contact) |
| Voltage: | 230 V ~ |
| Frequency: | 50 Hz |
| Max. Current: | 16 A |
| Max. Power: | 3600 W |
| Dimensions (L x H x P): | 18 x 8 x 8 cm (approximate, based on product description) |
| Material: | Plastic |
| Color: | White |
| Plug Type: | Type F (Schuko) |
| Mounting Options: | Flush mount, surface mount, corner mount (90° angled back) |
8. Warranty and Support
Specific warranty information for this product is not provided in the available data. Please refer to the retailer or manufacturer's website for detailed warranty terms and conditions.
For technical support or inquiries, please contact ChiliTec customer service or your point of purchase.
