SMALLRIG LP-E6NH USB-C Battery for Canon Instruction Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your SMALLRIG LP-E6NH USB-C Battery. This high-capacity 2400mAh battery is designed as a replacement for Canon LP-E6NH batteries, featuring a convenient USB-C charging port and full decoding for seamless camera compatibility.

What's Included

• USB-C Rechargeable Camera Battery x 1
• Battery Cover x 1
• 0.6m USB-A to USB-C Charging Cable x 1
• User Manual x 1

Image: The SMALLRIG LP-E6NH battery, a battery cover, and a USB-A to USB-C charging cable are shown as included components, along with a diagram of the battery's dimensions and specifications.

Setup and Charging

The SMALLRIG LP-E6NH battery offers versatile charging options, including its built-in USB-C port or a compatible Canon LC-E6E charger.

Charging via USB-C Port

1. Locate the USB-C charging port on the side of the battery.
2. Connect the provided USB-A to USB-C charging cable to the battery's USB-C port.
3. Connect the USB-A end of the cable to a compatible power source such as a USB wall adapter (5V/2A recommended), car charger, power bank, or laptop USB port.
4. The charging indicator light on the battery will illuminate red during charging.
5. Once fully charged, the indicator light will turn green. A full charge typically takes approximately 2.5 hours.

Image: The battery is shown connected via USB-C to a wall adapter, car charger, and power bank, illustrating multiple charging methods.

Image: Close-up of the battery showing the charging indicator light: red when charging, green when fully charged.

Charging with Canon LC-E6E Charger

The SMALLRIG LP-E6NH battery is also compatible with original Canon LC-E6E chargers. Simply insert the battery into the charger as you would an original Canon battery. The charger's indicators will function as normal.

Image: The SMALLRIG battery is shown inserted into a Canon LC-E6E charger, demonstrating compatibility.

Video: This video demonstrates the charging process of the SmallRig USB-C Camera Battery, including its compatibility with original chargers and its multi-level protection features.

Operating Instructions

Inserting the Battery into Your Camera

1. Ensure your camera is powered off before inserting or removing the battery.
2. Open the battery compartment cover on your Canon camera.
3. Align the battery with the compartment, ensuring the contacts match.
4. Gently push the battery into the compartment until it clicks into place.
5. Close the battery compartment cover securely.

This battery is fully decoded, meaning it will communicate correctly with your Canon camera without triggering warning pop-ups about battery compatibility. The camera will display accurate battery level information.

Image: Displays the SMALLRIG LP-E6NH battery alongside several compatible Canon EOS camera models, including R, R5, R6, R7, 5D Mark II/III/IV, 6D, 7D, 60D, 70D, 80D, 90D, XC10, XC15, 5DS, 5DS R.

Image: Illustrates the battery's 2400mAh capacity, indicating approximately 3 hours of recording time or 780 shots with a Canon EOS R7.

Image: Compares the SMALLRIG 2400mAh battery (blue, 2.5H charge) with another brand's 2400mAh battery (beige, 4H charge), emphasizing the SMALLRIG's faster charging time.

Image: A Canon camera screen shows a full battery icon, confirming that the SMALLRIG battery functions without compatibility warnings.

Maintenance and Care

• Store the battery in a cool, dry place when not in use.
• Avoid exposing the battery to extreme temperatures (below 0°C or above 45°C).
• Do not disassemble, crush, or puncture the battery.
• Keep the battery contacts clean. Use a dry, soft cloth to wipe them if necessary.
• Use only the provided charging cable or a compatible Canon LC-E6E charger.
• If the battery will not be used for an extended period, charge it to approximately 50% before storage and recharge every 3-6 months to maintain optimal performance.

The battery features a robust 6-layer protection system against overcharge, overvoltage, overcurrent, short circuit, high temperature, and over-discharge, ensuring safe operation.

Troubleshooting

• Battery Not Charging:
  • Ensure the USB-C cable is securely connected to both the battery and the power source.
  • Verify that the power source (wall adapter, power bank) is functioning correctly and provides at least 5V/2A output.
  • Check the charging indicator light on the battery; it should be red during charging. If it's off, try a different cable or power source.
  • If using a Canon LC-E6E charger, ensure the battery is properly seated and the charger's indicators are active.
• Camera Not Recognizing Battery / Warning Pop-up:
  • This battery is designed with a full decoding chip to prevent such warnings. If a warning appears, ensure the battery is fully inserted and the camera contacts are clean.
  • Power off the camera, remove the battery, and reinsert it firmly.
  • If the issue persists, contact customer support.
• Short Battery Life:
  • Ensure the battery is fully charged before use (green indicator light).
  • Battery performance can be affected by extreme temperatures. Operate within the recommended range of 0°C to 45°C.
  • High power consumption features on your camera (e.g., continuous video recording, high frame rate shooting, Wi-Fi) will deplete the battery faster.

Specifications

Image: A detailed diagram illustrating the physical dimensions and key technical specifications of the battery, also showing included components.

Warranty and Support

The SMALLRIG LP-E6NH USB-C Battery comes with a 2-Year Warranty (1-Year for Electronic Products). For warranty claims or technical support, please contact SMALLRIG customer service through their official website or the retailer where the product was purchased.

For additional information and support, visit the official SMALLRIG store: SMALLRIG Store on Amazon.