1. Introduction
This manual provides essential information for the proper setup, operation, and maintenance of your Vangoa PD-M Guitar Pedal Board with Isolated Power Supply. Please read these instructions carefully to ensure optimal performance and longevity of your device.
2. Package Contents
Upon unboxing, verify that all components are present:
- Vangoa PD-M Pedal Board
- Isolated Power Supply (integrated)
- Power Adapter
- DC Power Cables (various lengths)
- Hook & Loop Fastener Strips (Velcro)
- Premium Backpack-style Carrying Bag
- User Manual (this document)
Image: The Vangoa PD-M Pedal Board and its included accessories, including the carrying bag, power adapter, DC cables, and hook & loop strips.
3. Setup Instructions
3.1 Attaching Pedals
- Apply the provided hook & loop fastener strips to the underside of your guitar pedals and the surface of the pedal board. Ensure a secure fit.
- Arrange your pedals on the board according to your desired signal chain. The 2.1-inch wide attaching area per row facilitates cable routing.
Image: A close-up view of the pedal board showing the application of hook and loop strips for securing pedals.
3.2 Power Connections
The Vangoa PD-M features an integrated isolated power supply to minimize noise and provide stable power to your effects pedals.
- Connect the included power adapter to the PWR input on the pedal board.
- Use the provided DC power cables to connect your pedals to the appropriate outputs on the integrated power supply. The supply offers:
- 10 x 9V outputs (6x 9V 300mA, 4x 9V 500mA)
- 1 x 12V 500mA output
- 1 x 18V 500mA output
Image: A detailed view of the pedal board's integrated isolated power supply, highlighting the various 9V, 12V, and 18V outputs.
3.3 Audio Connections
Connect your guitar to the 'IN' jack on the pedal board. Connect the 'OUT' jack to your amplifier or audio interface. This routes your signal through the pedal chain and the integrated LED light bar.
3.4 Adjusting the Angle
The pedal board features foldable legs that allow you to adjust the playing angle for improved accessibility. Simply fold out the legs to achieve a comfortable 7-degree angle, or fold them in for a flat, compact setup.
Image: The Vangoa PD-M Pedal Board shown with its legs folded out, providing an angled surface for easier pedal access.
Video: An overview of the Vangoa Pedal Board with Power Supply, demonstrating its features and components.
4. Operating Instructions
4.1 Powering On/Off
Locate the 'ON/OFF' switch on the side of the pedal board. Flip the switch to the 'ON' position to power the unit and your connected pedals. Flip it to 'OFF' when not in use.
4.2 LED Light Bar
The Vangoa PD-M features an integrated LED light bar that responds to your guitar signal, providing a visual representation of your playing dynamics. This feature can enhance the aesthetic of your performance.
Image: The Vangoa PD-M Pedal Board displaying its dynamic LED light bar in action, responding to audio input.
4.3 Power-Up Buffer Function
The pedal board incorporates a power-on buffering mechanism to stabilize current and protect pedals from voltage fluctuations. Some pedals may have startup logic that requires a quick voltage rise, potentially necessitating re-plugging when first connected. This is a normal function to ensure pedal protection.
Image: A diagram explaining the Power-Up Buffer Function and its implications for pedal startup.
5. Maintenance
5.1 Cleaning
To clean the aluminum surface of the pedal board, use a soft, dry cloth. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by thorough drying. Avoid abrasive cleaners or solvents.
5.2 Carrying Bag Care
The included backpack-style carrying bag is made from 1680D waterproof material. To clean, wipe with a damp cloth. Ensure the bag is dry before storing the pedal board to prevent moisture damage.
Image: A graphic illustrating the anodized aluminum surface and aircraft-grade aluminum alloy construction of the pedal board.
6. Troubleshooting
6.1 No Power to Pedals
- Ensure the power adapter is securely connected to both the pedal board and a working power outlet.
- Verify the 'ON/OFF' switch is in the 'ON' position.
- Check individual DC power cables for secure connections to both the power supply and pedals.
- If a pedal does not power on, try unplugging and re-plugging its power cable (refer to the Power-Up Buffer Function in Section 4.3).
6.2 Unwanted Noise
- The integrated power supply is isolated to reduce noise. Ensure all power cables are correctly connected.
- Check audio cables for proper connection and integrity.
- Ensure the power adapter is connected to a grounded outlet.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | PD |
| Dimensions (Medium) | 18" x 13.5" (45.7cm x 34.2cm) |
| Item Weight | 3.4 lbs (1.5 kg) |
| Body Material | Aluminum (One-Piece-Bent Construction) |
| Power Outputs | 10 x 9V (6x 300mA, 4x 500mA), 1 x 12V 500mA, 1 x 18V 500mA |
| Carrying Bag | 1680D Waterproof, Backpack-style |
Image: A visual representation of the Vangoa PD-M Pedal Board's dimensions and size, including the carrying bag.
8. Portability and Carrying
The Vangoa PD-M is designed for musicians on the go. Its lightweight aluminum construction and foldable legs make it easy to transport. The included backpack-style bag offers multiple carrying options:
- Handheld: Use the top handle for quick carrying.
- Shoulder Carrying: Attach the shoulder strap for hands-free transport.
- Backpack-style: Utilize the backpack straps for comfortable, even weight distribution, leaving your hands free for other equipment.
Image: An illustration of the three different ways to carry the Vangoa PD-M Pedal Board using its versatile bag.
Video: A demonstration of the Vangoa Pedal Board's strong, lightweight design and its carrying case.
9. Warranty and Support
Specific warranty details are not provided in the product information. For warranty claims or technical support, please refer to the Vangoa official website or contact your retailer.
