1. Product Overview
This Dexnor protective case is designed for the Samsung Galaxy Tab S8 (2022) and Samsung Galaxy Tab S7 (2020) 11-inch models. It provides full-body protection, featuring a built-in screen protector, a durable kickstand, and an S Pen holder. The dual-layer hybrid design combines shock-absorbing TPU and hard polycarbonate materials to safeguard your device against drops and impacts.
Image 1.1: Overview of the Dexnor Full-body Rugged Case, highlighting its design for Samsung Galaxy Tab S7/S8.
Key Features:
- Compatibility: Specifically designed for Samsung Galaxy Tab S8 (2022) and S7 (2020) 11-inch models.
- Dual-layer Protection: Combines a rigid polycarbonate back with a soft TPU frame for military-grade drop protection.
- Built-in Screen Protector: Integrated screen protection against scratches without affecting touch sensitivity.
- Integrated Kickstand: Multi-angle kickstand for both horizontal and vertical viewing.
- S Pen Holder: Conveniently stores your S Pen.
- Reinforced Corners: Enhanced bumper shock cushions for superior impact absorption.
2. Installation Instructions
Follow these steps to properly install your Samsung Galaxy Tab S8/S7 11-inch tablet into the Dexnor protective case.
2.1 Verify Compatibility
Before installation, ensure your tablet model is compatible with this case. This case is designed for Samsung Tab S7/S8 (2020/2022) 11-inch models (Model: SM-X700/X706/T870/T875tab). It is NOT compatible with Samsung Tab S7+/S8+ (12.4-inch) or Samsung Tab S7 FE (12.4-inch).
Image 2.1: Compatibility guide for the Dexnor case, indicating supported Samsung Galaxy Tab S7/S8 11-inch models.
To check your tablet model: Go to Settings > About Tablet.
2.2 Case Disassembly
- Carefully separate the front protective piece from the back case. The case is constructed in two parts: a front frame with the built-in screen protector and a back piece made of TPU and polycarbonate.
- Begin by gently prying apart the corners of the case to release the clips holding the two sections together.
Image 2.2: Exploded view illustrating the separate components of the Dexnor case: the rugged PC back, soft TPU frame, and integrated screen protector.
2.3 Tablet Placement
- Place your Samsung Galaxy Tab S8/S7 11-inch tablet into the front protective piece, ensuring it sits securely and all edges are aligned.
- Ensure the built-in screen protector lies flat against your tablet's screen without any dust or air bubbles.
2.4 Reassembly
- Align the back case with the front protective piece containing your tablet.
- Press firmly around the edges of the case until all clips snap into place, securing both parts together. Ensure there are no gaps.
- Verify that all ports, buttons, and the camera are correctly aligned with the case cutouts.
3. Operating Instructions
3.1 Using the Integrated Kickstand
The case features a foldable kickstand on the back for hands-free viewing.
- To deploy the kickstand, gently pull it outwards from the back of the case until it locks into your desired viewing angle.
- The kickstand supports both horizontal (landscape) and vertical (portrait) orientations for versatile viewing.
- To retract the kickstand, push it back into its recess on the case until it sits flush.
Image 3.1: The foldable kickstand in use, demonstrating stable horizontal and vertical viewing positions.
Image 3.2: Demonstrating the great stability of the kickstand for both horizontal and vertical viewing.
3.2 Using the S Pen Holder
The case includes a dedicated holder for your S Pen.
- Insert your S Pen into the designated slot on the side of the case.
- The holder is designed to keep the S Pen secure while allowing easy access for removal.
Image 3.3: Detail of the stylus holder, showing how the S Pen is securely stored and easily accessible.
Image 3.4: The S Pen holder ensures the stylus is kept safe and well-organized.
4. Maintenance
Proper care will extend the life and appearance of your Dexnor case.
- Cleaning: Use a soft, damp cloth to wipe the exterior of the case. Avoid harsh chemicals or abrasive cleaners, as these can damage the material.
- Screen Protector Care: For the built-in screen protector, use a microfiber cloth to gently wipe away fingerprints and smudges. If necessary, slightly dampen the cloth with water or a screen-safe cleaning solution.
- Inspection: Periodically inspect the case for any signs of wear or damage, especially after drops. Ensure all parts are securely fitted.
- Storage: When not in use, store the case in a clean, dry environment away from direct sunlight and extreme temperatures.
5. Troubleshooting
5.1 Screen Protector Sensitivity Issues
If you experience reduced touch sensitivity or S Pen drag with the built-in screen protector:
- Re-installation: Remove the tablet from the case and re-install it, ensuring no dust particles are trapped between the screen and the protector. Press firmly around the edges to ensure a tight seal.
- Clean Screen: Ensure both your tablet's screen and the inside of the screen protector are thoroughly clean before re-installation.
- S Pen Drag: Some users may find the integrated plastic screen protector creates drag for the S Pen. If this significantly impacts your usage, consider using a separate tempered glass screen protector directly on your tablet and removing the plastic screen protector from the case's front frame.
5.2 Case Not Fitting Properly
If the case does not seem to fit your tablet correctly:
- Verify Model: Double-check that your tablet is indeed a Samsung Galaxy Tab S8 (2022) or S7 (2020) 11-inch model. Refer to Section 2.1 for compatibility details.
- Check for Obstructions: Ensure there are no foreign objects or other screen protectors on your tablet that might prevent the case from closing properly.
- Reassemble Carefully: Follow the installation steps in Section 2.2-2.4 precisely, ensuring all clips engage and the case is fully sealed around the tablet.
5.3 Kickstand Instability
If the kickstand feels loose or unstable:
- Ensure Full Extension: Make sure the kickstand is fully extended and locked into its open position.
- Flat Surface: Use the kickstand on a flat, stable surface.
- Inspect for Damage: Check the kickstand mechanism for any visible damage or wear.
6. Product Specifications
| Brand | Dexnor |
| Model Name | Tab S7/S8 |
| Compatible Devices | Samsung Galaxy Tab S8 (2022) / S7 (2020) [11 inch] |
| Material | Polycarbonate, TPU |
| Color | Black |
| Item Dimensions (L x W x H) | 10.5 x 7.02 x 0.67 inches |
| Built-In Features | Screen Protector, Kickstand, S Pen Holder |
| Water Resistance Level | Not Water Resistant |
| Protection Type | Dual-layer Hybrid Military Grade Drop Protection |
7. Warranty & Support
Dexnor products are designed for durability and performance. For specific warranty information regarding your product, please refer to the packaging or the official Dexnor website.
If you encounter any issues or have questions about your Dexnor case, please contact Dexnor customer support through the retailer's platform where you purchased the product or visit the official Dexnor brand store for assistance.
Online Support: Visit the Dexnor Store on Amazon