1. Introduction
Thank you for choosing the AQUABATOS Essens Series Bathroom Mirror. This mirror is designed to enhance your bathroom experience with its advanced features, including energy-efficient LED lighting, an anti-fog function, a 3x magnifying cosmetic mirror, and a digital clock. Please read this manual carefully before installation and use to ensure proper function and safety.
Image 1: AQUABATOS Essens Series Bathroom Mirror (120x60cm) with illuminated features.
2. Safety Information
- Ensure the power supply is disconnected before installation or maintenance.
- Installation should be performed by a qualified electrician if you are unsure about electrical connections.
- Do not expose the mirror to excessive moisture or direct water spray beyond its intended use in a bathroom environment.
- Handle the mirror with care to prevent damage to the glass or internal components.
- Keep packaging materials out of reach of children.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- AQUABATOS Essens Series Bathroom Mirror (120 x 60 cm)
- Wall mounting bracket
- Screws and wall plugs for mounting
- User Manual
4. Setup and Installation
The mirror is designed for simple wall mounting. Follow these steps carefully:
- Prepare the Wall: Choose a suitable location on the wall, ensuring it can support the mirror's weight (approximately 13.7 kg). Mark the positions for drilling based on the mounting bracket.
- Install Mounting Bracket: Drill holes at the marked positions, insert wall plugs, and securely attach the wall mounting bracket using the provided screws.
- Electrical Connection: Ensure the main power supply is OFF. Connect the mirror's power cable to your existing power source (e.g., a ceiling light connection). This mirror does not include a plug and is intended for direct wiring.
- Hang the Mirror: Carefully lift the mirror and hang it onto the installed wall bracket, ensuring it is stable and level.
Image 2: Step-by-step installation guide for the AQUABATOS bathroom mirror.
5. Operating Instructions
The mirror features intuitive touch controls for its various functions.
5.1. LED Lighting Control
- Power On/Off: Briefly touch the power symbol (U) on the mirror to turn the LED lighting on or off.
- Dimming: Long press the power symbol (U) to continuously adjust the brightness of the LED lighting. Release when the desired brightness is reached. The mirror has a memory function that saves the last dimming setting even after power off.
Image 3: Dimmable LED lighting control via touch sensor.
5.2. Anti-Fog Function
- Activate/Deactivate: Briefly touch the anti-fog symbol (▤) to turn the mirror heating (anti-fog) function on or off. This function operates independently.
Image 4: Separate anti-fog function keeping the mirror clear.
5.3. Digital Clock
- Display On/Off: Long press the anti-fog symbol (▤) to turn the digital clock display on or off. The clock continues to run in the background when the display is off, ensuring the correct time is shown upon reactivation.
5.4. 3x Magnifying Cosmetic Mirror
The integrated 3x magnifying mirror, equipped with LED light strips, is ideal for detailed tasks such as makeup application or shaving.
Image 5: The 3x magnifying cosmetic mirror with integrated lighting.
Image 6: Detailed view of the touch controls for light, anti-fog, and digital clock.
6. Maintenance
To maintain the appearance and functionality of your mirror, follow these cleaning guidelines:
- Glass Cleaning: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror surface, to avoid liquid seeping into the electrical components.
- Frame Cleaning: Wipe the anodized aluminum frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- General Care: Regularly check for any loose connections or damage. Do not attempt to repair electrical components yourself.
7. Troubleshooting
If you encounter any issues with your mirror, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lighting does not turn on. | No power supply; loose connection; faulty LED driver. | Check main power supply. Ensure electrical connections are secure. If problem persists, contact support. |
| Anti-fog function is not working. | Anti-fog function not activated; faulty heating element. | Ensure the anti-fog touch sensor is activated. If problem persists, contact support. |
| Digital clock is incorrect or not displayed. | Clock display turned off; power interruption. | Long press the anti-fog symbol to toggle the clock display. The clock should retain time even after power interruptions. |
| Mirror stops functioning entirely. | Electrical fault; component failure. | Check all power connections. If the mirror remains unresponsive, disconnect power and contact customer support. |
8. Specifications
- Brand: AQUABATOS
- Model Number: LM08126D
- Dimensions: 120L x 60W cm
- Material: 4mm Crystal Glass, Anodized Aluminum Frame
- Light Color: Cool White 6400K
- LED Type: SMD2835 Hi-Tech LED strip
- Features: Touch Sensor, Dimmable LED Lighting, Separate Anti-Fog Function, 3x Magnifying Cosmetic Mirror, Digital Clock, Memory Function
- Mounting Type: Wall Mount
- Item Weight: 13.7 Kilograms
- Energy Efficiency Rating: E
9. Warranty and Support
The AQUABATOS Essens Series Bathroom Mirror comes with a 12-month manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact AQUABATOS customer service through the retailer where the product was purchased. Please have your proof of purchase and model number (LM08126D) ready when contacting support.
