Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your AONBOY Cat Water Fountain. Designed with your pet's health and comfort in mind, this stainless steel fountain provides a continuous flow of fresh, filtered water, encouraging hydration and promoting overall well-being.
Product Features
- Flowing Water Source: Cats naturally prefer moving water, which this fountain provides to encourage increased water intake.
- "Big Eyes" Water Level Window: A transparent window allows for easy monitoring of the water level without needing to open the lid.
- SUS304 Healthy Food Grade Material: Constructed from high-quality stainless steel, resistant to high temperature, corrosion, and oxidation, preventing feline acne.
- 108oz/3.2L Large Capacity: Provides sufficient water for an adult cat for approximately 8 days, ideal for short trips.
- Multiple Filtration System: Utilizes high-density filter cotton, activated carbon coconut shell, ion exchange resin, and pre-filter sponges for comprehensive water purification.
- Silent Pump: Features a low-noise pump and spherical design for quiet operation, ensuring a peaceful environment for pets and owners.
Setup Instructions
Follow these steps to assemble and prepare your AONBOY Cat Water Fountain for use:
- Unpack Components: Carefully remove all parts from the packaging. Ensure you have the main stainless steel bowl, the top cover with the hemispherical dome, the water pump, the faucet, the filter sponge, and the carbon filter.
- Clean Components: Before first use, thoroughly rinse all parts (except the pump and adapter) with water. The stainless steel bowl and cover can be washed with mild soap and water.
- Prepare Filter: Rinse the carbon filter under running water for a few minutes to remove any loose carbon dust. Soak the pump and filter sponge in water for 5 minutes to ensure they are fully saturated.
- Assemble Pump: Attach the filter sponge to the pump. Insert the pump into its designated slot at the bottom of the fountain's top cover. Ensure the power cord is routed through the designated channel.
- Install Filter: Place the carbon filter into the filter tray on the top cover.
- Attach Faucet: Securely attach the faucet to the pump's outlet on the top cover.
- Fill with Water: Place the stainless steel bowl on a flat surface. Fill the bowl with clean water up to the MAX fill line, visible through the "Big Eye" window. Do not overfill.
- Place Top Cover: Carefully place the assembled top cover onto the stainless steel bowl, ensuring it sits securely.
- Connect Power: Plug the power adapter into a standard electrical outlet. The fountain will begin circulating water.
Image: Exploded view of the AONBOY Cat Water Fountain components, illustrating how each part fits together during assembly.
Operating Instructions
The AONBOY Cat Water Fountain is designed for continuous operation to provide fresh water for your pet.
- Continuous Operation: Once plugged in, the fountain will continuously circulate water. The silent pump ensures minimal noise disruption.
- Water Level Monitoring: Regularly check the water level through the transparent "Big Eye" window on the side of the fountain. Refill water when it reaches the minimum level to prevent the pump from running dry.
- Encouraging Use: Cats are naturally attracted to flowing water. The faucet design and hemispherical shape provide multiple drinking surfaces, catering to different preferences.
Image: The "Big Eye" water level window on the AONBOY Cat Water Fountain, allowing for easy visual inspection of the water volume.
Maintenance
Regular cleaning and filter replacement are crucial for maintaining water quality and extending the life of your fountain.
Cleaning Frequency:
- Fountain: Clean the entire fountain (stainless steel bowl, top cover, and all removable parts) at least once a week.
- Pump: Clean the pump every 2-4 weeks, or more frequently if you notice reduced water flow or increased noise.
Cleaning Steps:
- Unplug: Always unplug the fountain from the power outlet before cleaning.
- Disassemble: Remove the top cover, faucet, filter, and pump. Empty any remaining water from the bowl.
- Wash Parts: Wash the stainless steel bowl and top cover with mild soap and water. Rinse thoroughly to remove all soap residue.
- Clean Pump: Disassemble the pump by removing the cover and impeller. Use a small brush (like a toothbrush or the provided cleaning brush) to clean the impeller and the inside of the pump housing. Rinse thoroughly.
- Replace Filter: Replace the carbon filter every 2-4 weeks, or as needed based on water quality and pet usage. Replace the filter sponge every 1-2 months.
- Reassemble: Reassemble all components, ensuring the pump and filter are correctly positioned. Refill with fresh water.
Image: Demonstrates the ease of cleaning the stainless steel components of the fountain.
Image: Illustration of the multi-stage filtration system, highlighting the different filter components.
Official Product Video: Pump Cleaning
Video: A detailed guide on how to clean the water pump of your AONBOY Cat Water Fountain, ensuring optimal performance and longevity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow or weak flow | Low water level; pump clogged with debris/hair; pump impeller dirty; filter needs replacement. | Refill water to MAX line. Clean the pump and impeller. Replace the filter. Ensure no kinks in the tubing. |
| Fountain is noisy | Low water level; pump not properly seated; debris in pump; fountain not on a level surface. | Add water. Ensure pump is securely placed. Clean the pump. Place fountain on a flat, stable surface. |
| Water tastes strange or smells bad | Filter needs replacement; fountain needs thorough cleaning; water quality issue. | Replace the carbon filter. Perform a complete cleaning of all fountain components. Use filtered or bottled water if tap water quality is a concern. |
| Leaking from water level window | Seal around window is compromised or damaged. | Inspect the seal around the water level window for any damage or misalignment. Contact customer support if the seal is faulty. |
Specifications
- Model Name: S3-SC
- Brand: AONBOY
- Material: SUS304 Stainless Steel (Fountain body)
- Capacity: 108oz / 3.2L
- Dimensions (LxWxH): 9.06" x 9.06" x 4.69"
- Item Weight: 1.85 pounds (0.84 Kilograms)
- Power Source: Corded Electric (Adapter included)
- Target Audience: House-cats, dogs
- Special Features: Water Level Window, Silent Pump, Multi-Filter System, Faucet Design
Warranty and Support
Your AONBOY Cat Water Fountain comes with a 1-Year Warranty. The pump specifically has a 2-Year Warranty.
For any questions, concerns, or warranty claims, please contact AONBOY customer support. You may also be eligible for free replacement filters; please refer to the product packaging or contact customer support for details.
For additional support and product information, visit the official AONBOY store: AONBOY Store on Amazon
