DELTA FAUCET Tetra Pivot Arm Toilet Paper Holder Instruction Manual

Introduction

The Delta Tetra Pivot Arm Toilet Paper Holder is designed to provide a sleek, architectural look to your bathroom while offering practical functionality. Its wall-mount design and pivoting arm ensure secure holding of toilet paper rolls and easy replacement.

This accessory is crafted from durable alloy steel and zinc, featuring a matte black finish that resists corrosion, tarnish, and discoloration, ensuring long-lasting performance and appearance.

Key features include:

• Matte black finish for a bold statement.
• Crafted from steel and zinc for strength and reliability.
• Pivoting arm for easy toilet paper roll change.
• Designed to coordinate with the full Tetra Bath Collection.
• All mounting hardware, template, and instructions provided for easy installation.

Setup and Installation

This toilet paper holder is designed for easy wall-mounted installation, particularly suitable for drywall applications without the need for drilling. Please ensure you have the necessary tools before beginning.

Required Tools:

• #2 Phillips Screwdriver
• Goggles (for safety)

Included Components:

• Installation Template with adhesive strips
• Bubble Level
• Allen Wrench
• Mounting Bracket & Screws
• Drywall Anchor

Installation Steps:

1. Press Included Adhesive Level to Template: Attach the provided bubble level to the installation template.
2. Align Adhesive Template into Place: Position the template on the wall at the desired height and location. Ensure it is level using the attached bubble level. The adhesive strips will hold it in place.
3. Mark Mounting Holes Using Template: Use a pencil or marker to mark the precise locations for the mounting holes through the template.
4. Tap in Anchors & Screw in to Mount: Carefully tap the drywall anchors into the marked holes. Then, secure the mounting bracket to the wall using the provided screws and a Phillips screwdriver.

For detailed visual instructions, please refer to the Installation Manual (PDF).

Figure 1: Easy Installation Steps (No Drill! Drywall installation only)

Figure 2: Installation Tools and Included Hardware

Operating Instructions

The Delta Tetra Toilet Paper Holder features a convenient pivoting arm for effortless roll changes. To replace a roll, simply pivot the arm upwards, slide off the empty roll, and slide on a new one. Then, pivot the arm back down to secure the new roll in place.

The design ensures the toilet paper roll remains secure during use, preventing it from sliding off. It is designed to accommodate standard and larger sized toilet paper rolls.

Figure 3: Pivoting Arm Mechanism

Maintenance

To maintain the pristine appearance of your Delta Tetra Toilet Paper Holder, regular cleaning is recommended. The matte black finish is designed to resist corrosion, tarnish, and discoloration, but proper care will extend its lifespan.

• Cleaning: Use a soft, damp cloth and mild soap to clean the surface. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
• Drying: After cleaning, wipe the holder dry with a soft, clean cloth to prevent water spots.
• Avoid: Do not use polishes, waxes, or other products that are not specifically designed for matte finishes.

Figure 4: Matte Black Finish Detail

Troubleshooting

While the Delta Tetra Toilet Paper Holder is designed for stability and ease of use, here are some common considerations:

• Loose on Wall: If the toilet paper holder feels loose after installation, re-check the mounting screws and drywall anchors. Ensure they are fully tightened and properly seated in the wall. Refer to the installation steps in the 'Setup and Installation' section.
• Pivoting Arm Stiffness: If the pivoting arm feels stiff, ensure no debris is obstructing the pivot point. A small amount of silicone-based lubricant (avoid oil-based products) can be applied if necessary, but typically this should not be required.
• Finish Discoloration: If you notice any unusual discoloration, ensure you are following the recommended cleaning guidelines. Avoid harsh chemicals or abrasive materials.

Specifications

Figure 5: Product Dimensions

Warranty

The Delta Tetra Pivot Arm Toilet Paper Holder is backed by Delta's Limited Lifetime Warranty. This warranty ensures that you can enjoy the look and functionality of your product for life, providing peace of mind regarding its quality and durability.

For full details regarding the terms and conditions of the Limited Lifetime Warranty, please refer to the official Delta Faucet warranty documentation or contact Delta Faucet customer support.

Figure 6: Lifetime Limited Warranty

Support

Should you require further assistance, have questions about installation, or need to address any issues not covered in this manual, please contact Delta Faucet customer support.

You can also visit the official Delta Faucet store for additional product information and resources: Visit the Delta Store.

For a downloadable version of the installation guide, please access the Installation Manual (PDF).