Funsicle Quickset 12ft x 36in Round Inflatable Above Ground Swimming Pool Instruction Manual

Introduction

This manual provides essential information for the safe and efficient setup, operation, and maintenance of your Funsicle Quickset 12ft x 36in Round Inflatable Above Ground Swimming Pool. Please read all instructions carefully before assembly and use to ensure proper function and safety.

Safety Information

• Always supervise children in and around the pool.
• Do not dive or jump into the pool. The water depth is not sufficient for diving.
• Ensure the pool is set up on a completely level surface to prevent collapse or water spillage.
• Keep electrical components, such as the filter pump, away from water and ensure they are properly grounded.
• Regularly inspect the pool for any signs of damage, leaks, or wear.
• Follow all local regulations regarding pool safety, fencing, and permits.

Package Contents

Verify that all components are present before beginning assembly:

• Pool Liner (with inflatable top ring)
• 110-120V RX600 Filter Pump with GFCI
• Type D Filter Cartridge
• Repair Patch
• Hoses and Connectors for Filter Pump

Setup

1. Site Preparation

Select a firm, level area free of sharp objects, debris, and excessive slopes. A ground cloth (not included) is recommended to protect the pool liner. Ensure adequate drainage away from the pool area.

2. Unfolding the Pool

Carefully unfold the pool liner in the chosen location. Ensure the drain plug is securely closed. Smooth out any wrinkles on the bottom of the pool.

Image: The Funsicle Quickset 12ft x 36in Round Inflatable Pool, showing its overall design and connected filter pump.

3. Key Features Overview

Before proceeding with inflation and filling, familiarize yourself with the key design features of your Quickset pool, including the durable liner, easy-to-inflate top ring, convenient drainage plug, and effective cartridge filter pump system.

Image: A diagram illustrating the key features of the QuickSet Designer Pool Set, including the durable puncture-resistant liner, easy-to-inflate top ring, easy drainage plug, and effective cartridge filter pump.

4. Inflating the Top Ring

Locate the air valve on the top inflatable ring. Use an air pump (not included) to inflate the ring until it is firm but not overinflated. Do not use a high-pressure air compressor.

Image: The Funsicle Quickset pool, highlighting its 36-inch height, with the inflatable top ring visible.

5. Connecting the Filter Pump

Connect the hoses from the pool's inlet and outlet fittings to the RX600 Filter Pump. Ensure all connections are tight to prevent leaks. Place the filter pump on a stable, level surface near the pool, ensuring it is not directly in the path of water splash.

Image: The RX600 Filter Pump shown alongside a Type D filter cartridge, essential for water filtration.

Image: A close-up of water flowing into the pool from the return jet, indicating proper pump operation.

6. Filling the Pool

Begin filling the pool with water. As the water level rises, the inflatable top ring will float and help the pool walls rise. Smooth out any remaining wrinkles on the bottom as the pool fills. Fill the pool to the indicated "MAX FILL" line on the liner.

Image: A family enjoying the Funsicle Quickset pool, demonstrating its capacity for multiple users.

Operating Instructions

Filter Pump Operation

Once the pool is filled, plug the GFCI-protected filter pump into a suitable electrical outlet. The pump should run for several hours each day to ensure proper water circulation and filtration. Refer to the pump's specific instructions for recommended operating times based on pool usage and water conditions.

Water Treatment

It is essential to treat pool water with appropriate chemicals (e.g., chlorine, algaecide) to maintain hygiene and prevent algae growth. Test the water regularly using a pool test kit and adjust chemical levels as needed. Consult a pool supply professional for specific chemical recommendations and dosages for your pool size.

Maintenance

Filter Cartridge Cleaning and Replacement

The Type D filter cartridge should be rinsed with a garden hose daily or every other day, depending on pool usage and debris. Replace the filter cartridge every 2-4 weeks or when it becomes visibly dirty and cannot be cleaned effectively. Always unplug the filter pump before performing any maintenance.

Pool Cleaning

Regularly remove leaves, insects, and other debris from the pool surface using a skimmer net. Brush the pool walls and bottom as needed to prevent dirt buildup. For heavier debris, a pool vacuum (not included) may be used.

Liner Care

The pool liner is made from durable 3-ply ToughMesh materials designed to resist punctures. However, avoid sharp objects and rough play that could damage the liner. If a small puncture occurs, use the included repair patch following the instructions provided with the patch.

Image: A cross-section view illustrating the durable 3-ply ToughMesh material construction of the pool liner.

Troubleshooting

Specifications

• Brand: Funsicle
• Model: P1N01236A
• Product Dimensions: 144"L x 144"W x 36"H (12ft diameter x 36in height)
• Shape: Round
• Color: Brown
• Included Components: Filter Pump, Filter Cartridge, Liner
• Assembly Required: Yes
• Indoor/Outdoor Usage: Outdoor
• UPC: 193802325935
• Filter Pump: 110-120V RX600 with GFCI
• Liner Material: 3-ply ToughMesh

Warranty

This Funsicle Quickset Pool and its included pump are covered by a 1-year manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and does not cover damage due to misuse, improper setup, or normal wear and tear.

Support

For customer service and technical support, please refer to the contact information provided on the product packaging or visit the official Funsicle website. You may also find helpful setup videos and FAQs by scanning the QR codes on the product label.

• Customer Service Phone: (888) 870-4386
• Support Website: support.funsicle.com