Introduction
The EKO Aroma Touchless Automatic Soap Dispenser offers a sanitary and convenient handwashing experience. Designed for both bathroom and kitchen use, this water-resistant and rechargeable dispenser features quick and responsive sensor technology, adjustable dispensing volumes, and an innovative self-cleaning mode for optimal hygiene and longevity.
Key Features:
- Ultimate Touchless Experience: Ensures sanitary hand washing without physical contact.
- Quick & Responsive: Detects hands within 3 inches and dispenses liquid soap in 0.2 seconds.
- Customized Dispensing: 3 adjustable settings for tailored soap volume.
- Extended Power: Water-resistant charging port, up to three months of use per charge.
- Generous Capacity: 9 fl oz volume to cater to varying needs.
- Innovative Self-Cleaning: Maintains internal mechanism for longevity.
- Effortless Refill: Pop-up lid design for spill-free refilling.
- Reliable Design: Guarantees flawless operation and complements decor.
Product Overview
Figure 1: EKO Aroma Touchless Automatic Soap Dispenser (White)
Figure 2: Product Dimensions (4.72"L x 2.75"W x 6.88"H)
Setup
1. Charging the Dispenser
The EKO Aroma dispenser is USB-rechargeable. A single full charge typically lasts for up to three months of continuous use. The charging port is water-resistant.
Figure 3: USB-rechargeable dispenser. A single full charge lasts for up to 2 months.
Light Indicator Guide during charging:
- Blue Light: Power-On / Fully Charged
- No Light: Standby Mode
- Red Light: Power-Off / Low Battery
2. Filling the Dispenser with Soap
The dispenser has a generous 9 fl oz capacity and features an effortless pop-up lid design for easy refilling. It is compatible with liquid hand soap, dishwashing liquid, hand sanitizer gel, and body wash.
Figure 4: Effortless refilling with the pop-up lid.
Figure 5: Refill efficiently with the integrated air vent design.
Monitor the soap level easily through the transparent soap level window.
Figure 6: Transparent soap level window.
Operating Instructions
1. Power On/Off
To power on the dispenser, press and hold the power button located on the back until the blue light illuminates. To power off, press and hold the button until the red light appears.
2. Automatic Dispensing
The dispenser features a quick and responsive sensor. Simply place your hand within 3 inches of the sensor, and the dispenser will automatically release liquid soap in just 0.2 seconds. This touchless operation promotes optimal hygiene.
Figure 7: Experience hygienic sensor operation without a single touch. Detects up to 8cm away at a 25° angle.
Video 1: Demonstrates the EKO Aroma Touchless Automatic Soap Dispenser in white, highlighting its automatic sensor activation and easy-to-clean, water-resistant design. It also shows the 3 versatile dispense settings and easy refill process.
3. Adjusting Dispensing Volume
The dispenser offers 3 adjustable settings to customize the amount of soap dispensed. To change the volume, quickly press the power button once while the dispenser is on. The blue light will flash once, twice, or three times to indicate the selected volume setting (e.g., one flash for minimum, three flashes for maximum).
Figure 8: Customize your soap volume with a simple touch. The blue light flashes once to three times to indicate soap volume adjustment (0.8ml, 1.4ml, 2ml).
Maintenance
1. Self-Cleaning Mode
The EKO Aroma dispenser features an innovative self-cleaning mode. This mode proactively maintains the dispenser's internal mechanism, ensuring longevity and hassle-free operation. Refer to the quick start guide for specific instructions on activating the self-cleaning cycle.
2. Exterior Cleaning
The dispenser has a water-resistant design, making it easy to clean. Simply wipe the exterior with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals that could damage the finish.
Figure 9: Wiping down the water-resistant exterior of the dispenser.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dispenser not turning on. | Low battery or unit is off. | Charge the dispenser using the provided USB cable. Press and hold the power button to turn it on (blue light). |
| No soap dispensed. | Soap reservoir is empty, sensor is blocked, or soap is too thick. | Refill the soap reservoir. Ensure nothing is obstructing the sensor. If soap is too thick, dilute it slightly with water. |
| Inconsistent soap dispensing. | Air in the pump or sensor interference. | Run the self-cleaning mode. Ensure the dispenser is on a stable surface and away from direct sunlight or strong light sources that might interfere with the sensor. |
| Leaking from the nozzle. | Excess soap residue or internal blockage. | Activate the self-cleaning mode. Clean the nozzle area thoroughly. |
Specifications
- Model Number: EK6088L
- Color: White
- Material: Acrylonitrile Butadiene Styrene (ABS)
- Product Dimensions (L x W x H): 4.72" x 2.75" x 6.88"
- Liquid Volume Capacity: 9 Fluid Ounces (approx. 266 ml)
- Power Source: USB Rechargeable
- Dispensing Speed: 0.2 seconds
- Dispensing Settings: 3 adjustable levels
- Water Resistance: Yes
Warranty and Support
For warranty information, product support, or to inquire about replacement parts, please visit the official EKO website or contact EKO customer service directly. Keep your purchase receipt for warranty claims.
EKO Official Store: Visit the EKO Store on Amazon