Introduction
Thank you for choosing the Maxxima 4-inch Trimless Ultra-Thin Square Recessed LED Downlight. This product is designed to provide efficient and versatile lighting with a seamless, integrated appearance. Featuring 5 selectable color temperatures (CCT) and dimmable functionality, this downlight is suitable for various residential and commercial applications. This manual provides essential information for safe installation, operation, and maintenance.
Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Ensure all electrical connections are made correctly and securely.
- Do not modify the fixture. Any modifications may void the warranty and create safety hazards.
- Suitable for damp and wet locations.
- IC Rated for direct contact with insulation.
- ETL Listed for safety and quality assurance.
Package Contents
Verify that all components are present before beginning installation:
- 4-inch Trimless Square Recessed LED Downlight
- Integrated Junction Box (J-Box)
- Plaster Frame
- Instruction Manual
Image: Maxxima 4-inch trimless square recessed LED downlight with its integrated junction box.
Specifications
| Feature | Specification |
|---|---|
| Model Number | MRL-S41555S |
| Size | 4 Inch |
| Luminous Flux | 1000 Lumens |
| Wattage | 15 Watts |
| Voltage | 120 VAC |
| Color Temperature (CCT) | 2700K/3000K/3500K/4000K/5000K Selectable |
| Color Rendering Index (CRI) | 90 |
| Dimmable Range | 20% - 100% |
| Beam Spread | 38° |
| Lifetime Hours | 50,000 hours |
| Material | Aluminum |
| Certifications | ETL Listed |
| Fixture Dimensions | 6.4" W x 6.4" L x 4" D |
| J-Box Dimensions | 4" L x 2.5" W x 1.5" D |
Image: Dimensions of the Maxxima 4-inch trimless square recessed LED downlight.
Installation Instructions
Note: No ceiling can or housing is required for this trimless downlight. Always ensure power is disconnected before installation.
- Prepare the Cutout: Create a suitable opening in the ceiling for the plaster frame. Refer to the product dimensions for accurate sizing.
- Install the Plaster Frame: Insert the plaster frame into the new cutout. Secure the plaster frame to the sheetrock using appropriate screws. This frame will be plastered and painted over to achieve a seamless, trimless look.
Image: Diagram illustrating the installation of the plaster frame to the sheetrock.
- Plaster and Paint: Once the plaster frame is securely installed, plaster and paint over it to blend it with the ceiling surface. Allow sufficient drying time.
- Connect the Junction Box: Feed the integrated junction box through the plaster frame opening. Make the necessary electrical connections inside the J-Box according to local electrical codes. Ensure the J-Box is accessible for future servicing if required.
- Install the Downlight Fixture: Connect the downlight fixture to the junction box cable. Carefully insert the downlight fixture into the plaster frame opening. Twist and lock the fixture into place using the integrated twist locks. This secures the light and completes the trimless installation.
Image: Securing the downlight fixture into the plaster frame using twist locks.
Operating Instructions
Color Temperature (CCT) Selection:
- The downlight features a selectable CCT switch located on the back of the fixture.
- Before final installation (or by carefully accessing the back of the fixture if already installed), slide the switch to choose your desired color temperature: 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight).
Image: CCT selection switch and available color temperatures.
Dimming Functionality:
- This downlight is dimmable from 20% to 100% with compatible LED dimmers.
- For optimal performance, use a 150W max LED dimmer by Maxxima or other compatible LED dimmers.
Maintenance
- Ensure power is disconnected before cleaning.
- Clean the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners.
- The integrated LED does not require bulb replacement.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture; Loose wiring; Faulty switch | Check circuit breaker; Verify wiring connections; Test switch functionality |
| Light flickers | Incompatible dimmer; Loose wiring; Overloaded circuit | Ensure dimmer is LED compatible; Check wiring; Reduce load on circuit |
| Incorrect color temperature | CCT switch set incorrectly | Adjust the CCT switch on the back of the fixture |
Warranty
This Maxxima product comes with a 3-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Maxxima customer support.
Support
For technical assistance, troubleshooting, or product inquiries, please visit the official Maxxima website or contact their customer support team. Refer to the product packaging or Maxxima's website for current contact information.
