1. Introduction
Thank you for choosing the UMF RUHLA Autokinetic 1062M-5 automatic watch. This timepiece combines traditional craftsmanship with modern design, featuring a reliable automatic movement and a distinctive red dial with a Milanese stainless steel band. This manual provides essential information for the proper setup, operation, and maintenance of your watch to ensure its longevity and accurate performance.
2. Product Overview
The UMF RUHLA Autokinetic 1062M-5 is an automatic men's watch designed for daily wear. It features a robust stainless steel case, a striking red dial with a guilloche face style, and a comfortable Milanese stainless steel band. The dial is protected by K1 special glass, known for its durability.
Image 1: UMF RUHLA Autokinetic 1062M-5 watch. This image displays the watch's red dial, silver-toned stainless steel case, and Milanese mesh band.
Key components include the crown for time adjustment, the automatic movement visible through a potential exhibition case back (if applicable, not specified), and a butterfly clasp for secure fastening.
3. Setup
3.1 Setting the Time
- Unscrew/Pull out the Crown: Gently unscrew the crown (if it's a screw-down crown) or pull it out to the outermost position.
- Adjust Time: Rotate the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
- Push in/Screw down the Crown: Once the time is set, push the crown back into its normal operating position. If it's a screw-down crown, gently screw it back in to ensure water resistance.
3.2 Adjusting the Milanese Band
The Milanese band features an adjustable clasp for a custom fit.
- Open the Clasp: Use a small, flat tool (like a screwdriver or a spring bar tool) to lift the small lever on the clasp mechanism. This will unlock the clasp.
- Slide to Adjust: Slide the entire clasp mechanism along the mesh band to achieve the desired length.
- Secure the Clasp: Once the desired length is found, press the lever back down firmly until it clicks into place, securing the clasp. Ensure it is fully closed to prevent accidental opening.
4. Operating Your Automatic Watch
4.1 Automatic Movement
Your UMF RUHLA Autokinetic watch is powered by an automatic mechanical movement. This means it does not require a battery. The watch is wound by the natural motion of your wrist. When worn regularly, the watch will maintain its power reserve.
- Initial Winding: If the watch has stopped, gently shake it side-to-side for about 30 seconds or manually wind it by rotating the crown clockwise in its normal position for 20-30 turns. This will provide enough power to start the movement.
- Power Reserve: A fully wound automatic watch typically has a power reserve of 36-48 hours. If the watch is not worn for an extended period, it will stop and need to be re-wound.
4.2 Water Resistance
The watch is rated as Water Resistant. This generally means it is suitable for everyday use, such as splashes, rain, or brief immersion in water. It is not recommended for swimming, showering, diving, or any activities involving prolonged water exposure or high-pressure water jets. Always ensure the crown is fully pushed in or screwed down to maintain water resistance.
5. Maintenance
5.1 Cleaning
- Regularly wipe the watch case and band with a soft, dry, lint-free cloth to remove dust and fingerprints.
- For the stainless steel band, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials.
- Do not use cleaning solutions directly on the watch dial or crystal.
5.2 Storage
- When not wearing the watch, store it in a cool, dry place away from direct sunlight, extreme temperatures, and strong magnetic fields.
- Consider using a watch box or a watch winder if you wish to keep the automatic movement running continuously.
6. Troubleshooting
- Watch Not Running: If the watch has stopped, ensure it is sufficiently wound. Gently shake it for 30 seconds or manually wind it (20-30 turns of the crown).
- Time Inaccuracy: Automatic watches can have slight variations in accuracy. Factors like wearing habits, magnetic fields, and temperature changes can affect performance. If accuracy issues persist, consult a professional watchmaker.
- Water Inside Watch: If you notice condensation or water inside the watch, immediately take it to a qualified watch repair center. Do not attempt to open the watch yourself.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | UMF RUHLA |
| Model Number | 1062M-5 |
| Movement Type | Automatic |
| Display Type | Analog |
| Case Material Type | Stainless Steel |
| Case Diameter | 42 Millimeters |
| Dial Window Material Type | K1 Special Glass |
| Dial Color | Red |
| Band Material Type | Stainless Steel |
| Strap Type | Metal Bracelet (Milanese) |
| Band Color | Silver |
| Band Width | 20 Millimeters |
| Clasp Type | Folding Clasp / Butterfly Clasp |
| Water Resistance Level | Water Resistant |
| Item Shape | Round |
| Country of Origin | Germany |
| Included Components | Watch box |
8. Safety Information
- Avoid exposing the watch to extreme temperatures (above 60°C / 140°F or below 0°C / 32°F) or sudden temperature changes.
- Keep the watch away from strong magnetic fields (e.g., speakers, refrigerators, mobile phones, airport security scanners) as these can affect the accuracy of the mechanical movement.
- Avoid strong impacts or drops, which can damage the internal mechanism or external components.
- Do not attempt to open the watch case yourself, as this may compromise its water resistance and void any warranty.
9. Warranty and Support
For warranty information, service, or support inquiries, please refer to the documentation provided with your purchase or contact the UMF RUHLA customer service directly. Keep your proof of purchase for any warranty claims.
