Introduction
This manual provides instructions for the installation, operation, and maintenance of your VIRTAVO Solar Panel, Model XTYN-03. This solar panel is designed to provide continuous power to compatible VIRTAVO outdoor security cameras, ensuring reliable performance without frequent manual charging.
Package Contents
Please verify that all items are included in your package:
- 3.2W Solar Panel x1
- 13ft Charging Cable x1
- Type-C/Micro USB Port Adapter x1
- Adjustable Wall Mount x1
- Screws Set x1
- User's Manual x1
Note: Security camera is not included in the package.
Image: VIRTAVO Solar Panel and included accessories.
Specifications
| Brand | virtavo |
| Model Number | XTYN-03 |
| Material | Monocrystalline Silicon |
| Product Dimensions | 7.28"L x 4.72"W x 0.39"H |
| Efficiency | High Efficiency |
| Maximum Voltage | 5 Volts |
| Maximum Power | 3.6 Watts |
| Wire Length | 4 meters (approximately 13 feet) |
| Power Source | Corded Electric (via solar charging) |
Setup and Installation
Follow these steps to properly install your VIRTAVO Solar Panel:
- Choose an Optimal Location: Select a position with the most direct sunlight exposure throughout the day to maximize energy harvesting. Avoid areas with significant shade from trees, buildings, or other obstructions. The ideal angle for mounting your solar panel is generally equal to the local latitude ± 5°.
- Mount the Bracket:
- For solid surfaces (e.g., masonry, concrete): Drill pilot holes, insert the provided wall plugs, and then secure the mounting bracket with screws.
- For wooden surfaces: Secure the mounting bracket directly to the surface using the provided screws.
- Attach the Solar Panel: Slide the solar panel onto the mounting bracket until it is securely fastened. The bracket allows for 360° adjustment to fine-tune the panel's angle for optimal sunlight reception.
- Connect to Camera: Plug the 13ft charging cable into the Micro USB port on your camera. If your camera uses a Type-C port, use the provided Type-C adapter. Ensure the USB connector is fully plugged into the camera.
Image: Step-by-step installation guide for the VIRTAVO Solar Panel.
Image: Adjustable mounting bracket allows for flexible positioning to maximize sunlight exposure.
Image: Product dimensions and included Micro USB to Type-C adapter.
Operating Instructions
Once installed, the VIRTAVO Solar Panel will automatically begin charging your compatible VIRTAVO camera when exposed to direct sunlight. The high-efficiency monocrystalline silicon material ensures effective power generation.
- The panel provides 3.6W of power at 5V to maintain a continuous charge for your camera's battery.
- Even a few hours of direct sunlight can significantly extend your camera's battery life.
Image: The solar panel ensures continuous power supply for your camera.
Image: Solar panel providing continuous power to a security camera mounted outdoors.
Maintenance
To ensure optimal performance and longevity of your solar panel, regular maintenance is recommended:
- Cleaning: Periodically wipe the surface of the solar panel with a soft, damp cloth to remove dust, dirt, and debris. Avoid using harsh chemicals or abrasive materials.
- Obstruction Check: Regularly check for any new obstructions (e.g., growing foliage, new structures) that might cast shadows on the panel and reduce its efficiency.
- Weather Resistance: The solar panel is designed to be waterproof and can withstand various weather conditions, including snow, wind, and dust. However, extreme weather events may temporarily affect charging efficiency.
Image: The solar panel features a waterproof design suitable for various weather conditions.
Troubleshooting
If your VIRTAVO camera is not charging or maintaining power as expected, consider the following:
- Sunlight Exposure: Ensure the solar panel receives adequate direct sunlight. Re-adjust the angle or relocate the panel if necessary to avoid shadows.
- Cable Connection: Verify that the charging cable is securely connected to both the solar panel and the camera. Check for any damage to the cable or connectors.
- Panel Cleanliness: Clean the surface of the solar panel to remove any accumulated dust or debris that might be blocking sunlight.
- Camera Compatibility: Confirm that your camera is compatible with the VIRTAVO Solar Panel.
Warranty and Support
For warranty information, technical support, or further assistance, please refer to the official VIRTAVO website or contact customer service. Keep your purchase receipt for warranty claims.
You can find more information and support resources at www.virtavo.com.
