Brightever Solar Outdoor Lights User Manual
Model: HSG-T22
Introduction
Thank you for choosing Brightever Solar Outdoor Lights. This 2-pack of super bright wall lights features 178 LEDs, a 270° wide-angle illumination, and a motion sensor with three distinct lighting modes. Designed for outdoor security and convenience, these waterproof, solar-powered lights are ideal for patios, gardens, garages, and front doors.
This manual provides essential information for the proper installation, operation, and maintenance of your solar outdoor lights to ensure optimal performance and longevity.
Safety Information
- Ensure the solar panel is installed in a location that receives direct sunlight for at least 6-8 hours daily to ensure full charge.
- Do not disassemble or modify the product. Unauthorized modifications may cause damage and void the warranty.
- Keep the product away from fire or high temperatures.
- Dispose of batteries and electronic components responsibly according to local regulations.
- Avoid direct eye exposure to the LED light, as it can be very bright.
Product Overview
The Brightever Solar Outdoor Light is designed for efficient and reliable outdoor illumination. Key features include:
- Super Bright LEDs: Each light is equipped with 178 high-intensity LEDs, providing ample illumination.
- Wide Angle Illumination: A 270° lighting angle ensures broad coverage.
- PIR Motion Sensor: Detects motion up to 16 feet away with a 120° sensing angle.
- Solar Powered: Integrated monocrystalline silicon solar panel for energy efficiency.
- Durable Design: Constructed from premium ABS and plastic, offering IP65 waterproof, heat-resistant, and frost-resistant properties.
Image: Two Brightever Solar Outdoor Lights, showcasing their compact design and solar panel.
Image: Illustration of solar outdoor wall lights converting sunlight into electricity during the day and automatically lighting up at night.
Image: Diagram illustrating the 270° wide lighting angle and 16-foot motion sensing range of the solar light.
Image: Visual representation of the light's waterproof, frost-resistant, and heat-resistant properties, highlighting its all-weather durability.
Setup and Installation
Proper installation is crucial for the optimal performance of your solar lights. Follow these steps:
- Choose Location: Select a location that receives direct, unobstructed sunlight for 6-8 hours daily. Avoid areas under eaves, trees, or other structures that might shade the solar panel.
- Initial Charge: Upon receiving the lights, expose them to direct sunlight for 1-2 days to fully charge the internal battery before first use. This ensures maximum lighting effect.
- Mounting: Use the included mounting hardware to securely attach the light to a wall, fence, or other desired surface. The lights are designed for flush mount installation.
- No Wiring: These lights require no electrical wiring, making installation simple and flexible.
Image: Examples of the solar lights installed in various outdoor settings, including patios, garages, and along walls, demonstrating versatile placement.
Operating Instructions
Your Brightever Solar Outdoor Lights feature three lighting modes to suit different needs. The mode can typically be selected via a button on the light unit (refer to the physical product for exact button location).
- Mode 1: Stay-on Mode
The light turns on automatically at night and stays on continuously at a medium brightness throughout the night. - Mode 2: Dim Light Mode
The light turns on at night with a dim light. When motion is detected, it brightens to 100% brightness for 15 seconds, then returns to dim light. - Mode 3: Strong Light Sensing Mode
The light remains off at night and only turns on with 100% brightness for 15 seconds when motion is detected. It then turns off until motion is detected again.
Image: Visual demonstration of the three lighting modes: Stay-On Mode, Dim Light Mode (brightens with motion), and Strong Light Sensing Mode (only on with motion).
Maintenance
To ensure the longevity and efficiency of your solar lights, perform the following maintenance:
- Regular Cleaning: Periodically clean the surface of the solar panel to remove dust, dirt, bird droppings, or any other debris that may obstruct sunlight absorption. Use a soft, damp cloth.
- Inspect for Damage: Occasionally check the light unit for any physical damage or loose components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | Insufficient sunlight exposure; battery not charged. | Ensure the solar panel receives 6-8 hours of direct sunlight daily. Relocate if necessary. Allow 1-2 days for initial full charge. |
| Light is dim or only stays on for a short time. | Partial charge; solar panel is dirty. | Clean the solar panel surface. Ensure full sunlight exposure. Check selected lighting mode (Mode 1 provides continuous light, Modes 2 & 3 are motion-activated). |
| Motion sensor not detecting. | Obstruction in sensing range; incorrect mode. | Ensure the sensor is clear of obstructions. Verify the light is in Mode 2 or Mode 3 for motion detection. |
Specifications
- Model Name: HSG-T22
- Light Source: 178 LEDs per light (total 356 LEDs for 2-pack)
- Color Temperature: 6000 Kelvin (Bright White)
- Motion Sensor Range: Up to 16 feet (5 meters)
- Sensing Angle: 120°
- Lighting Angle: 270°
- Power Source: Solar Powered (1 Lithium Ion battery included)
- Material: Acrylonitrile Butadiene Styrene (ABS), Plastic
- Water Resistance: IP65 Waterproof
- Dimensions: 5.5"L x 2"W x 3.75"H (approx.)
- Item Weight: 0.635 ounces (per light, approx.)
- Included Components: Mounting Hardware
Warranty and Support
Brightever proudly stands behind its products. Your Solar Outdoor Lights come with a 1-year seller warranty.
For any issues, questions, or support needs, please do not hesitate to contact Brightever customer service. Your satisfaction is our top concern.
You can visit the official Brightever store for more information and support: Brightever Store on Amazon
