Ferplast 54056314

Ferplast Nota Large Bird Cage Instruction Manual

Model: 54056314

Introduction

This manual provides essential information for the safe and effective use of your Ferplast Nota Large Bird Cage, Model 54056314. Please read these instructions carefully before assembly and use to ensure the well-being of your birds and the longevity of the product. This cage is designed for canaries, budgies, finches, lovebirds, and similar small birds, suitable for both indoor and outdoor environments.

Safety Instructions

  • Always ensure the cage is placed on a stable, level surface to prevent tipping.
  • Keep the cage away from direct sunlight, drafts, and extreme temperatures.
  • Regularly inspect all parts for damage or wear. Replace any broken or worn components immediately.
  • Ensure all doors and access points are securely closed to prevent birds from escaping.
  • Keep small children and pets supervised around the cage to prevent accidental injury or disturbance to the birds.
  • Do not use harsh chemicals or abrasive cleaners on the cage, as these can be harmful to birds.

Package Contents

Before beginning assembly, verify that all components are present:

  • Cage panels (sides, front, back, roof, base)
  • 2 x Brava Rotating Feeders
  • 1 x Drinker
  • 6 x Perches
  • 4 x Wheels
  • 2 x Removable Trays
  • Assembly hardware (clips, screws, etc.)

Note: Stand is available separately and not included in this package.

Setup Instructions

Follow these steps for proper assembly of your bird cage:

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Check against the package contents list.
  2. Assemble Base: Attach the side panels to the base panel using the provided clips or screws. Ensure they are securely fastened.
  3. Attach Wheels: Insert the four wheels into the designated slots on the bottom of the cage base. Ensure they are firmly in place for easy mobility.
  4. Install Side and Back Panels: Connect the remaining side and back panels to form the main structure of the cage.
  5. Attach Roof: Place the sheet metal roof onto the top of the assembled cage structure and secure it.
  6. Insert Trays: Slide the two removable trays into the bottom of the cage. These are designed for easy cleaning.
  7. Install Feeders and Drinker:
    Closed Brava rotating feeder installed on cage bars

    Image A: Shows a closed Brava rotating feeder securely attached to the cage bars. The feeder is designed to be refilled from the outside without needing to open the main cage door, minimizing disturbance to the birds.

    Open Brava rotating feeder on cage bars

    Image B: Illustrates the Brava rotating feeder in an open position, ready for refilling. The design allows for easy access to the food compartment from outside the cage.

    Hand removing inner compartment of Brava rotating feeder

    Image C: A hand demonstrates how the inner compartment of the Brava rotating feeder can be pulled out for cleaning or refilling. This innovative design simplifies daily care routines.

    Attach the two Brava rotating feeders and the drinker to the cage bars at appropriate heights. Ensure they are securely fastened and easily accessible for your birds. The rotating design allows for refilling without opening the main cage door.

  8. Place Perches: Arrange the six perches inside the cage at varying heights and orientations to provide ample resting and climbing opportunities for your birds.
  9. Final Check: Double-check all connections and ensure the cage is stable and secure before introducing any birds.

Operating Instructions

  • Feeding: Use the Brava rotating feeders to provide food. Rotate the feeder to expose the compartment, fill with appropriate bird seed, and rotate back to close. This minimizes spillage and prevents birds from escaping during feeding.
  • Water: Fill the drinker with fresh water daily. Ensure it is securely attached and clean.
  • Access: Use the main cage door for bird entry/exit or for larger cleaning tasks. Always ensure the door is securely latched when closed.
  • Placement: Position the cage in a quiet, safe area, away from direct sunlight, drafts, and potential predators.

Maintenance

  • Daily Cleaning:
    • Replace food and water daily. Clean feeders and drinkers thoroughly.
    • Remove any uneaten fresh food.
  • Weekly Cleaning:
    • Remove the removable trays from the bottom of the cage. Empty and wash them with mild soap and water. Rinse thoroughly and dry before returning.
    • Wipe down all cage surfaces with a damp cloth. For deeper cleaning, use a bird-safe disinfectant.
    • Clean and reposition perches.
  • Monthly Cleaning:
    • Perform a thorough cleaning of the entire cage. This may involve temporarily relocating your birds to a smaller, secure enclosure.
    • Inspect all cage components for rust, damage, or loose parts. Tighten any loose connections.

Troubleshooting

ProblemPossible CauseSolution
Cage feels unstable.Loose connections or uneven surface.Ensure all clips and screws are tightened. Place the cage on a flat, level surface.
Difficulty moving the cage.Wheels are stuck or damaged.Check wheels for debris. If damaged, replace them. Ensure wheels are properly inserted.
Birds are escaping.Doors not latched or gaps in assembly.Verify all doors are securely closed and latched. Inspect cage panels for any gaps or loose connections.
Feeders are not rotating smoothly.Food debris or dirt obstructing mechanism.Remove feeders and clean thoroughly, ensuring no debris is in the rotating mechanism.

Specifications

BrandFerplast
Model Number54056314
Overall External Dimensions (L x W x H)111 x 66.5 x 167 cm
Internal Area Dimensions (L x W x H)99.5 x 53 x 167 cm
Bar Spacing11 mm (1.1 cm)
Bar Diameter1.5 - 3 mm
MaterialMetal
ColorBlack
Item Weight18.2 kg
Recommended forCanaries, Budgies, Finches, Lovebirds
Special FeaturesRemovable trays, Rotating feeders, Wheels
Usage EnvironmentIndoor/Outdoor

Warranty and Support

Ferplast products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Ferplast website. For technical support, replacement parts, or any other inquiries, please contact Ferplast customer service through their official channels.

Official Ferplast Website: www.ferplast.com

Related Documents - 54056314

Preview Ferplast Palladio 5 Bird Cage Assembly Instructions
Step-by-step guide to assembling the Ferplast Palladio 5 bird cage, including detailed instructions and part identification. Features clear diagrams and text descriptions for easy setup.
Preview Ferplast Piano and Palladio Bird Cages - Assembly and Specifications
Detailed information on Ferplast's Piano and Palladio bird cages, including assembly instructions, dimensions, and model numbers. Learn how to assemble and care for your bird's new home.
Preview Ferplast JOK 1 Bird Feeder Assembly Instructions - Cod. 845357
Detailed, step-by-step assembly guide for the Ferplast JOK 1 bird feeder (Cod. 845357), including dimensions and product code.
Preview Ferplast Bird Feeder Assembly Instructions - Model 845387
Step-by-step guide to assembling the Ferplast Jok 11 bird feeder (Model 845387). Learn how to put together your bird feeder with clear instructions and visual descriptions.
Preview Ferplast Krolik 140 & 160 Assembly Instructions
A comprehensive guide to assembling the Ferplast Krolik 140 and Krolik 160 pet cages, detailing all parts and step-by-step construction processes.
Preview Ferplast Olimpia Pet Habitat Assembly Guide
Step-by-step assembly instructions for the Ferplast Olimpia pet habitat, including detailed textual descriptions of each stage for easy setup of your small animal's home.