Introduction
Thank you for choosing the Legami Erasable Gel Pen. This pen is designed for smooth writing and easy correction, featuring thermosensitive ink that can be erased without a trace. With three vibrant colors in one pen, it's perfect for various writing tasks.
Key features of your Legami Erasable Gel Pen include:
- Thermosensitive ink for clean erasing.
- Refillable design for extended use.
- Ergonomic handle for comfortable writing.
- Three ink colors: Black, Red, and Blue.
- Fine 0.5mm tip for precise lines.
This image displays the complete Legami Erasable Gel Pen, featuring its unique travel-themed barrel and ergonomic grip.
Setup
Your Legami Erasable Gel Pen comes pre-assembled with ink cartridges. No initial setup is required for first use. If you need to replace the ink cartridges, follow these steps:
- Gently unscrew the lower barrel section of the pen from the upper section.
- Carefully remove the depleted ink cartridge(s).
- Insert the new Legami compatible ink cartridge(s) into their respective slots, ensuring they are fully seated.
- Screw the lower barrel section back onto the upper section until secure.
This image illustrates the pen's components, including the main barrel, the removable grip section, and the three distinct ink refills (black, red, and blue) that can be easily replaced.
Operating Instructions
Writing
To write, simply select your desired ink color by pressing down the corresponding color tab at the top of the pen. The 0.5mm fine tip provides a smooth and consistent ink flow for clear writing.
Erasing
To correct mistakes, use the eraser located at the top of the pen. The thermosensitive ink reacts to friction, allowing for clean and complete erasure without leaving residue or damaging the paper. Apply gentle pressure and rub the eraser over the ink you wish to remove.
This close-up view highlights the 0.5mm tip of the pen, along with visual cues indicating its refillable nature and the effectiveness of its erasing function.
A detailed view of the pen's upper barrel, showcasing the inspirational phrase 'TO TRAVEL IS TO LIVE' and a subtle world map pattern, part of its travel theme.
Maintenance
Refilling Ink
When an ink color runs out, replace the cartridge as described in the 'Setup' section. Ensure you use genuine Legami compatible refills for optimal performance and erasing capabilities.
Cleaning
Wipe the pen's exterior with a soft, dry cloth to keep it clean. Avoid using harsh chemicals or abrasive materials, as these may damage the pen's finish or the eraser.
Troubleshooting
- Ink not flowing smoothly:
Check if the ink cartridge is properly seated. If the pen has been stored unused for a long time, try scribbling on a piece of scrap paper to get the ink flowing. Ensure the ink cartridge is not empty and replace if necessary. - Erasing is not clean:
Ensure the paper surface is dry before erasing. The thermosensitive ink requires friction to become transparent; ensure you are applying adequate, but not excessive, pressure with the eraser. Avoid erasing on textured or damp surfaces.
Specifications
| Feature | Detail |
|---|---|
| Brand | Legami |
| Model Number | TEP0001 (Manufacturer Part Number: MIN0001) |
| Ink Colors | Black, Red, Blue |
| Tip Diameter | 0.5mm (Fine Point) |
| Product Dimensions | 0.39 x 0.39 x 5.98 inches (Diameter 1 cm, Height 15.2 cm) |
| Item Weight | 0.705 ounces |
| Material Type | Plastic |
| Grip Type | Contoured / Ergonomic |
| Closure | Snap |
Warranty and Support
Legami products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Legami website. If you encounter any issues or require support, please contact Legami customer service through their official channels.
Return Policy: This product typically has a 30-day return/replacement policy from the date of purchase, as per standard retail terms.
