Welcome
Thank you for choosing the VRURC 20000mAh Portable Charger. This manual provides essential information for the safe and efficient use of your device. Please read it carefully before operation and retain it for future reference.
Product Overview
The VRURC 20000mAh Portable Charger is designed for convenience and versatility, featuring multiple built-in cables and fast-charging capabilities.
Key Features:
- 20000mAh high-capacity power bank.
- Built-in 4 cables: USB-C, iOS (Lightning), Micro-USB, and USB-A for recharging the power bank.
- 22.5W/20W PD fast charging support.
- Capable of charging up to 4 devices simultaneously.
- LED digital display for battery percentage.
- Anti-slip and anti-scratch design with a portable lanyard.
- Smart chip for comprehensive safety protection.
Image: The VRURC 20000mAh Portable Charger, showcasing its compact design and digital display.
Image: The portable charger with its integrated USB-C, iOS, and Micro-USB cables extended for use.
Setup
Charging Your Power Bank:
Before initial use, fully charge your power bank. There are two convenient ways to recharge the device:
- Using the Built-in USB-A Cable: Connect the integrated USB-A cable to a compatible USB wall adapter (not included). A full recharge takes approximately 11 hours with a 5V/2A input.
- Using the USB-C Input Port: For faster recharging, connect a USB-C cable (not included) to the 18W USB-C input port. This method can fully charge the power bank in approximately 6 hours with a 9V/2A power adapter.
Image: The power bank being recharged using its built-in USB-A cable, plugged into a wall adapter.
Image: The power bank being recharged through its USB-C input port, connected to a wall adapter for faster charging.
Operating Instructions
Charging Your Devices:
The VRURC portable charger offers multiple output options to charge various smart devices.
- Built-in USB-C Cable: For devices with a USB-C port. Supports up to 20W fast charging.
- Built-in iOS (Lightning) Cable: For Apple devices. Supports up to 18W fast charging.
- Built-in Micro-USB Cable: For Android devices with a Micro-USB port.
- USB-A Output Port: For devices requiring a standard USB-A connection, supporting up to 22.5W fast charging.
The power bank is designed to charge up to 4 devices simultaneously using its combination of built-in cables and the USB-A output port.
Image: The portable charger connected to and charging a smartphone, tablet, and wireless earbuds concurrently.
Video: A demonstration of the VRURC 20000mAh Portable Charger's built-in cables and multi-device charging capability.
Video: An overview of the VRURC Portable Charger with built-in cables, highlighting its 20000mAh capacity.
LED Display:
The power bank features an LED digital display that shows the remaining battery percentage. Press the power button located on the side of the device to activate the display and check the current charge level.
Image: Close-up of the power bank's LED display indicating a full 100% charge.
Maintenance and Safety
Care and Handling:
- Keep the device away from extreme temperatures, direct sunlight, and liquids.
- Clean the surface with a soft, dry cloth. Avoid abrasive cleaners.
- The anti-slip and anti-scratch design helps maintain the device's appearance and durability.
- Utilize the portable lanyard for easy carrying and to prevent accidental drops.
Safety Features:
The VRURC portable charger incorporates a smart chip battery pack to protect against common electrical hazards:
- Short-circuiting
- Over-current
- Over-voltage
- Over-heating
Always ensure proper ventilation during charging and avoid covering the device to prevent heat buildup.
Troubleshooting
Device Not Charging / Slow Charging:
- Check Connections: Ensure all cables are securely connected to both the power bank and the device being charged.
- Power Bank Charge Level: Verify the power bank has sufficient charge using the LED display. Recharge if necessary.
- Reset Device: If experiencing unusual behavior or slow charging, try resetting the power bank by holding the power button for approximately 20 seconds.
- Cable Compatibility: Ensure the correct cable type is used for your device (USB-C, iOS, Micro-USB).
- Adapter Output: When recharging the power bank, use a compatible wall adapter (e.g., 9V/2A for faster USB-C input, 5V/2A for built-in USB-A input).
Specifications
| Feature | Detail |
|---|---|
| Model Name | T2047Q |
| Battery Capacity | 20000 Milliamp Hours |
| Connector Type | Built-in USB-C, iOS (Lightning), Micro-USB cables; USB-A port |
| Special Features | Built-in Cables, Fast Charging, LED Indicator Lights, Anti-slip Lanyard Design |
| Max Output (USB-A Port) | 22.5W |
| Max Output (Built-in USB-C/iOS Cables) | 18W |
| Power Bank Recharge Time (USB-C Input) | Approx. 6 hours (with 9V/2A adapter) |
| Power Bank Recharge Time (Built-in USB-A Input) | Approx. 11 hours (with 5V/2A adapter) |
| Item Dimensions (L x W x Th) | 6.14" x 2.75" x 1.08" |
| Item Weight | 396 Grams |
| Battery Cell Type | Lithium Polymer |
| Number of Batteries | 2 Lithium Polymer batteries (included) |
Warranty and Support
Warranty Information:
This VRURC product comes with a 12-month replacement service. For any product issues, technical support, or warranty claims, please contact VRURC customer support through the retailer or the official VRURC website.
Package Contents:
- 1x VRURC Portable Charger 20000mAh
- 1x User Manual
