1. Product Overview
The Brightever E12 LED Candelabra Bulbs are designed as an energy-efficient replacement for traditional 40-watt incandescent bulbs. These 4-watt LED bulbs provide 470 lumens of warm white light at 2700K, suitable for various indoor lighting fixtures.
Key features include:
- Energy Efficiency: Consumes only 4 watts, equivalent to a 40-watt incandescent bulb.
- Long Lifespan: Rated for over 25,000 hours of operation.
- Standard Base: Features a standard E12 screw base (12mm diameter) for easy installation.
- Light Quality: Emits 2700K warm white light with a Color Rendering Index (CRI) of 90+, ensuring vivid and natural colors.
- Eye Comfort: Engineered to be flicker-free, strobe-free, and glare-free for enhanced visual comfort.
Image 1.1: Overview of the Brightever E12 LED Candelabra Bulbs.
2. Setup and Installation
These LED bulbs are designed for simple installation into compatible light fixtures.
2.1 Safety Precautions
- Ensure the power supply to the fixture is turned OFF before installation to prevent electrical shock.
- Allow existing bulbs to cool completely before removal.
- Do not exceed the maximum wattage rating of your light fixture.
- Handle bulbs by the base, not the glass, to avoid damage or injury.
2.2 Installation Steps
- Turn off the power to the light fixture at the circuit breaker or wall switch.
- Carefully unscrew the old bulb from the E12 base socket in a counter-clockwise direction.
- Gently screw the new Brightever E12 LED Candelabra Bulb into the E12 base socket in a clockwise direction until it is snug. Do not overtighten.
- Restore power to the light fixture.
- Turn on the light switch to verify proper operation.
Image 2.1: Illustration of bulb installation into a light fixture.
3. Operating Instructions
These LED bulbs operate like standard light bulbs. Once installed, they can be controlled using the existing light switch connected to the fixture.
- Turning On/Off: Use the wall switch or fixture switch to turn the light on or off.
- Dimmability: Please note that while some marketing materials may suggest dimmability, the product specifications indicate these bulbs are Non Dimmable. Attempting to use these bulbs with a dimmer switch may result in flickering, damage to the bulb, or improper operation. It is recommended to use these bulbs with standard on/off switches only.
- Light Color: These bulbs provide a warm white light at 2700 Kelvin. For comparison, 5000 Kelvin is a daylight white.
Image 3.1: Visual comparison of 2700K Warm White and 5000K Daylight White light temperatures.
4. Maintenance
Brightever LED Candelabra Bulbs require minimal maintenance due to their long lifespan and durable construction.
4.1 Cleaning
- Ensure the bulb is cool and the power is turned OFF before cleaning.
- Wipe the bulb with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the bulb's finish or internal components.
4.2 Storage
If storing bulbs, keep them in their original packaging or a protective container in a cool, dry place to prevent damage.
5. Troubleshooting
If you encounter issues with your Brightever E12 LED Candelabra Bulbs, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to the fixture, loose bulb, faulty fixture, or damaged bulb. | Check power supply and wall switch. Ensure bulb is screwed in tightly. Test bulb in another working fixture. Inspect fixture for damage. |
| Bulb flickers or strobes. | Incompatible dimmer switch (these bulbs are non-dimmable), loose connection, or voltage fluctuations. | Ensure the bulb is not connected to a dimmer switch. Tighten the bulb. If problem persists, consult an electrician for voltage issues. |
| Light output is too dim. | Incorrect bulb for desired brightness, or voltage issue. | Verify the bulb's lumen output (470lm) meets your needs. Check voltage supply. |
| Bulb makes buzzing noise. | Incompatible dimmer switch or faulty wiring. | Ensure the bulb is not connected to a dimmer switch. Consult an electrician to inspect wiring. |
Image 5.1: The bulbs are designed to prevent discomfort from flicker, strobe, or glare.
6. Specifications
Detailed technical specifications for the Brightever E12 LED Candelabra Bulbs:
- Brand: Brightever
- Model Name: 320104-04
- Light Type: LED
- Bulb Shape Size: B11
- Bulb Base: E12
- Wattage: 4 Watts
- Incandescent Equivalent Wattage: 40 Watts
- Brightness: 470 Lumens
- Light Color: Warm White
- Color Temperature: 2700 Kelvin
- Color Rendering Index (CRI): 90
- Voltage: 110-130 VAC
- Accepted Voltage Frequency: 100 to 120 Volts and 60 Hertz
- Special Feature: Non Dimmable
- Average Life: 25,000 Hours
- Beam Angle: 360 Degrees
- Material: Glass
- Indoor/Outdoor Usage: Indoor
- Product Dimensions: 1.25"W x 3.88"H (3.18 cm W x 9.86 cm H)
- Item Weight: 7.4 ounces (0.21 Kilograms)
Image 6.1: Key specifications and dimensions of the bulb.
Image 6.2: Energy and cost-saving benefits of the LED bulb.
7. Warranty and Support
Specific warranty details for the Brightever E12 LED Candelabra Bulbs are not provided within this manual. For warranty information, product support, or any inquiries, please refer to the product packaging or contact Brightever customer service directly through their official channels or the retailer where the product was purchased.
You may also visit the Brightever Store on Amazon for additional product information and support resources: Brightever Amazon Store.
