Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your IHOTDER Universal Dash Cam Mount Bracket. Please read this guide thoroughly before installation to ensure proper use and optimal performance.
Product Overview
The IHOTDER Universal Dash Cam Mount Bracket is designed to securely hold most dash cams and rear cameras with a specific mounting hole distance. Its durable alloy construction and 180-degree rotating design allow for flexible positioning and a stable hold.
Figure 1: Product Dimensions. This image illustrates the key dimensions of the mount bracket, including a length of 1.5 inches, a width of 1.06 inches, and a mounting hole distance of 0.42 inches. It also shows the included double-sided adhesive and two screws.
Compatibility
This dash cam bracket is compatible with most reverse cameras or dash cams that feature two mounting holes on the same side of the device. The distance between these two mounting holes must be 10.5mm (0.42 inches).
Important: Before purchase and installation, please measure the actual mounting hole distance of your camera device to confirm compatibility. Cameras with mismatched mounting hole distances are not applicable.
Figure 2: Compatibility Guide. This image demonstrates examples of compatible and incompatible dash cameras. Compatible cameras have two mounting holes with a 0.42-inch distance, while incompatible ones have different configurations or distances.
Installation Instructions
Follow these steps for proper installation of your dash cam mount bracket:
- Prepare the Surface: Clean the desired mounting surface (e.g., front/rear windshield, window) with a wet cloth. Ensure the surface is free from dust, water, and oil for optimal adhesive performance.
- Attach the Camera: Secure your dash cam or rear camera to the bracket using the provided screws. Ensure the camera is firmly attached to the bracket's mounting holes.
- Apply Adhesive: Peel off the backing from the strong adhesive pad.
- Mount the Bracket: Carefully position the bracket with the attached camera onto the cleaned surface. Press firmly for several seconds to ensure a strong bond. For improved adhesion, a hairdryer can be used to warm the adhesive slightly before application.
- Adjust Angle: Once securely mounted, adjust the camera angle using the 180-degree rotating design to eliminate any driving blind spots.
Figure 3: Camera Attachment. This image illustrates how the dash cam is securely fixed to the bracket using screws, ensuring a stable connection.
Figure 4: Adhesive Application. This image shows the final step of installation, where the adhesive backing is peeled off and the mount is pressed onto the cleaned surface.
Operation and Adjustment
The mount features a 180-degree vertical rotation capability. After installation, you can adjust the angle of your camera by gently rotating the bracket to achieve the desired viewing angle. The design ensures the camera remains stable once adjusted and fixed with screws, preventing wobbling during driving.
Figure 5: 180° Rotation Feature. This image sequence highlights the mount's ability to rotate 180 degrees vertically, allowing for precise camera angle adjustments.
Maintenance
To ensure the longevity and proper function of your dash cam mount bracket, follow these simple maintenance guidelines:
- Cleaning: Periodically wipe the bracket with a soft, damp cloth to remove dust and grime. Avoid using harsh chemicals or abrasive cleaners, as these may damage the alloy finish.
- Adhesive Check: Occasionally check the adhesive bond to the mounting surface. If the bond appears to weaken, ensure the surface is clean and reapply if necessary, or consider using a new adhesive pad.
- Screw Tightness: Verify that all screws holding the camera to the bracket and allowing for rotation are securely tightened. Do not overtighten.
Troubleshooting
- Mount Not Sticking:
- Ensure the mounting surface was thoroughly cleaned and dry before application. Dust, oil, or moisture can prevent proper adhesion.
- Apply firm pressure for an extended period (at least 30 seconds) during initial mounting.
- Consider using a hairdryer to gently warm the adhesive before application to improve stickiness, especially in colder environments.
- Camera Wobbles After Installation:
- Check that the screws connecting the camera to the bracket are tightened securely.
- Ensure the bracket itself is firmly adhered to the mounting surface.
- Camera Does Not Fit the Bracket:
- Verify that your camera's mounting holes have a distance of 10.5mm (0.42 inches). If the distance is different, your camera is not compatible with this bracket.
Product Specifications
| Brand | IHOTDER |
| Model | Rear Camera Holder Rear Window Bracket |
| Item Model Number | IHOTDER-Universal |
| Item Weight | 0.317 ounces |
| Product Dimensions | 4.8 x 3.9 x 0.6 inches |
| Mounting Type | Window Mount |
| Mounting Hole Distance | 10.5mm (0.42 inches) |
| Material | Durable Alloy |
| Rotation | 180° Vertical |
| Color | Black |
| Included Components | Dash cam bracket (x1), Adhesive backing (x1), Screws (x2) |
Warranty Information
Specific warranty details for the IHOTDER Universal Dash Cam Mount Bracket are not provided within this manual. For information regarding product warranty, please refer to the product packaging or contact IHOTDER customer support directly.
Customer Support
If you encounter any issues or have questions not covered in this manual, please contact IHOTDER customer support through the retailer where the product was purchased or visit the official IHOTDER website for assistance.