1. Introduction
Thank you for choosing the JJC Camera Remote Control and Equipment Holder Strap. This product is designed to securely attach various small devices, such as camera remote controls, 18650 batteries, and other camera accessories, to tripod legs, light stands, or similar supports. Its robust design ensures your equipment remains stable and easily accessible during photo shoots.
Key Features:
- Adjustable trifold cradle for devices up to 1.97 inches (5 cm) by 0.87 inches (2.2 cm).
- Compatible with JJC TM series WT-868 and MT-636 remote controls, 18650 batteries, and camera batteries.
- Two-leg securing touch-fastener straps for attachment to poles from 0.6 inches to 2.5 inches in diameter.
- Constructed from soft, stretchable, high-density neoprene and polyester for durability and portability.
- Features an anti-slip backing to ensure secure attachment and prevent sliding.
2. Package Contents
- 1 x JJC Camera Remote Control and Equipment Holder Strap
3. Product Overview
The holder strap is designed for versatility and ease of use. It features a main pouch for your device and two adjustable straps for securing it to a support.
Figure 3.1: Front view of the JJC Camera Remote Control Holder Strap, showing the main pouch and securing straps.
Figure 3.2: Rear view of the strap, highlighting the hook and loop fasteners for secure attachment.
Figure 3.3: Close-up of the strap's material, showcasing the soft, stretchable neoprene and polyester construction.
Figure 3.4: Detail of the anti-slip design on the strap's backing, which helps prevent movement when attached to a pole.
4. Setup and Installation
Follow these steps to properly set up and install your JJC Camera Remote Control and Equipment Holder Strap:
- Prepare the Device: Ensure your camera remote control, 18650 battery, or other equipment fits within the adjustable trifold cradle. The device should not exceed 1.97 inches (5 cm) in width and 0.87 inches (2.2 cm) in thickness.
- Attach to Support: Wrap the two-leg securing touch-fastener straps around a tripod leg, light stand, photography ladder, pole, or beam. The support should have a diameter between 0.6 inches and 2.5 inches. Ensure the anti-slip backing is in contact with the support for maximum stability.
- Secure the Strap: Firmly press the hook and loop fasteners together to secure the strap around the support. Verify that the strap is tight and does not slide.
- Insert Equipment: Place your remote control or battery into the trifold cradle of the holder. The elastic material will hold it snugly in place.
Figure 4.1: The holder strap securely attached to a tripod leg, with a remote control placed inside for easy access.
Figure 4.2: A close-up view demonstrating how a remote control fits into the holder strap's cradle.
Figure 4.3: A detailed view showing the strap's secure wrap around a tripod leg, utilizing the hook and loop fasteners.
5. Operation
Once installed, the holder strap provides a convenient and secure location for your essential photography accessories. This allows for quick and easy access to items you'll need during photo shoots, keeping your remote control ready for convenient use and preventing loss.
Figure 5.1: The remote control is positioned within the holder strap on a tripod, illustrating its operational readiness.
Demonstration Video: Equipment Mounting Strap for Power Bank on Tripod
Video 5.1: This video demonstrates the application of a similar equipment mounting strap for a power bank on a tripod, showcasing the general concept of securing accessories.
Related Concept Video: Bone Bike Power Strap
Video 5.2: This video illustrates a 'Power Strap' concept used for securing a power bank to a bicycle. While not directly for camera tripods, it highlights the flexibility and secure holding capability of stretchable straps for portable power solutions.
6. Care and Maintenance
To ensure the longevity and optimal performance of your holder strap, follow these care instructions:
- Cleaning: Wipe the strap with a damp cloth to remove dust or dirt. Avoid using harsh chemicals or abrasive cleaners.
- Drying: Allow the strap to air dry completely before storing. Do not expose to direct sunlight or high heat for extended periods.
- Storage: Store the strap in a cool, dry place away from direct sunlight when not in use.
- Inspection: Periodically check the hook and loop fasteners and the strap material for any signs of wear or damage. Replace the product if significant wear is observed to ensure secure holding.
7. Troubleshooting
If you encounter any issues with your JJC Camera Remote Control and Equipment Holder Strap, consider the following:
- Strap is not holding securely:
- Ensure the support (tripod leg, pole) diameter is within the specified range of 0.6" to 2.5".
- Make sure the hook and loop fasteners are clean and fully engaged.
- Check for any obstructions between the strap and the support.
- Verify that the anti-slip backing is making proper contact.
- Device does not fit in the cradle:
- Confirm that your device's dimensions do not exceed 1.97 inches (5 cm) in width and 0.87 inches (2.2 cm) in thickness. The cradle is designed for specific sizes.
- Strap appears loose or stretched:
- Over time, materials may experience some stretching. If the strap no longer provides a secure hold, consider replacing it.
8. Specifications
| Model | Camera Remote Control Holder Strap |
| Brand | JJC |
| Color | Black |
| Material | Neoprene, Polyester |
| Item Weight | 1.44 ounces (approx. 40.8 grams) |
| Package Dimensions | 5.31 x 2.95 x 1.34 inches (approx. 13.5 x 7.5 x 3.4 cm) |
| Compatible Support Diameter | 0.6" to 2.5" (approx. 1.5 cm to 6.35 cm) |
| Max Device Dimensions | 1.97" (5 cm) width x 0.87" (2.2 cm) thickness |
| Manufacturer | Jinjiacheng Photography Equipment Co.,Ltd. |
9. Warranty and Support
For warranty information or technical support regarding your JJC Camera Remote Control and Equipment Holder Strap, please refer to the product packaging or contact your retailer. You may also visit the official JJC website for further assistance and product registration.