GOOLOO GP2000 Portable Car Jump Starter User Manual

1. Introduction

The GOOLOO GP2000 Portable Car Jump Starter is a versatile device designed to provide emergency jump-starting for 12-volt vehicles. It delivers 2000A peak cranking power, suitable for engines up to 8.0L gas or 6.0L diesel. This unit is compatible with a wide range of vehicles, including cars, motorcycles, SUVs, trucks, cargo vans, ATVs, snowmobiles, and yachts. Beyond jump-starting, it functions as a portable power bank for electronic devices and includes a 400-lumen LED flashlight for various situations.

Image: The GOOLOO GP2000 Portable Car Jump Starter unit with its smart jumper cables.

2. Safety Information

The GP2000 is equipped with advanced safety features to ensure secure operation. The smart jumper cable features all-metal heavy-duty clamps designed for durability and reliable connection. The unit incorporates 10 types of protection:

• Over-charge Protection
• Over-current Protection
• Short-circuit Protection
• Reverse-polarity Protection
• Low-temperature Protection
• High-temperature Protection
• Over-voltage Protection
• Over-load Protection
• Spark-proof Protection
• Reverse-charge Protection

These protections allow the GP2000 to operate safely in extreme environments ranging from -4°F to 140°F (-20°C to 60°C).

Image: Visual representation of the 10 safety protections integrated into the GP2000 jump starter.

Image: Close-up view of the quality metal clamps on the smart jumper cable, highlighting copper material for reliability.

3. Package Contents

Please check the box for the following items:

• GOOLOO GP2000 Portable Car Jump Starter Battery Pack
• Smart Jumper Cable
• USB to Type-C Cable
• Storage Case
• User Manual

Image: All items included in the GOOLOO GP2000 product package, laid out for inspection.

4. Product Overview

Familiarize yourself with the various components and ports of your GP2000 jump starter:

• Output 1 (USB): 5V/9V/12V for quick charging compatible devices.
• Output 2 (USB): 5V/2.4A for standard charging.
• Input (Type-C): 15W for charging the jump starter unit.
• Jumper Cable Port: Connects the smart jumper cable.
• LED Light: Provides illumination with multiple modes.
• Power Switch: Turns the unit on/off.
• Indicator Lights: Display battery charge level.

Image: Detailed diagram illustrating the ports, buttons, and indicator lights on the GOOLOO GP2000 unit.

5. Charging the GP2000

Before initial use, fully charge your GP2000 unit. A full charge typically takes 3-4 hours.

Charging Instructions:

1. Connect the provided USB to Type-C cable to the GP2000's Input (Type-C) port.
2. Connect the other end of the USB cable to a suitable USB power adapter (not included) or a car charger (not included).
3. The indicator lights on the GP2000 will illuminate, showing the charging progress. All lights will be solid when fully charged.

It is recommended to recharge the unit every 3-6 months, even if not used, to maintain optimal battery health.

Image: The GOOLOO GP2000 unit being charged using a wall adapter. Note: Wall charger is not included.

Image: The GOOLOO GP2000 unit being charged using a car charger. Note: Car charger is not included.

6. Operating Instructions: Jump Starting a Vehicle

Follow these steps carefully to jump start your vehicle:

Standard Start (Battery Voltage > 8V):

1. Insert: Plug the smart jumper cable into the jump starter's port.
2. Connect: Attach the red clamp to the vehicle's positive (+) battery terminal and the black clamp to the negative (-) battery terminal.
3. Verify: Ensure the indicator light on the smart jumper cable turns green. This indicates a safe and ready connection.
4. Start: Start your vehicle's engine.
5. Remove: Once the vehicle starts, immediately remove the clamps from the battery terminals, then disconnect the smart jumper cable from the jump starter.

Manual Override Start (Battery Voltage < 8V):

If the vehicle battery is extremely low (below 8V), the smart jumper cable may not show a green light. In this case, use the manual override function:

1. Insert: Plug the smart jumper cable into the jump starter's port.
2. Connect: Attach the red clamp to the vehicle's positive (+) battery terminal and the black clamp to the negative (-) battery terminal.
3. Boost: Press and hold the "Boost" button on the smart jumper cable until the indicator light turns green.
4. Start: Start your vehicle's engine within 30 seconds.
5. Remove: Once the vehicle starts, immediately remove the clamps from the battery terminals, then disconnect the smart jumper cable from the jump starter.

Image: A visual guide demonstrating the four main steps for jump-starting a car using the GOOLOO GP2000.

7. Using as a Power Bank

The GP2000 can charge various electronic devices:

Charging Devices:

1. Turn on the GP2000 unit using the power switch.
2. Connect your electronic device (e.g., smartphone, tablet) to either the Output 1 (5V/9V/12V) or Output 2 (5V/2.4A) USB port using a compatible charging cable.
3. The device will begin charging automatically.

Image: The GOOLOO GP2000 unit connected and charging a smartphone and a tablet simultaneously, demonstrating its power bank functionality.

8. Using the LED Flashlight

The integrated 400-lumen LED flashlight offers three modes for different situations:

Flashlight Modes:

1. Normal: Provides continuous illumination.
2. Strobe: Emits a flashing light for signaling or attracting attention.
3. SOS: Flashes the international Morse code signal for distress.

To activate and cycle through the modes, press the dedicated flashlight button on the unit.

Image: The GOOLOO GP2000 unit with its LED flashlight active, illustrating the Normal, Strobe, and SOS modes.

9. Maintenance and Storage

Proper maintenance and storage will extend the lifespan of your GP2000 jump starter:

• Recharge Periodically: The GP2000 boasts a remarkable 24-month standby time. However, it is recommended to fully recharge the unit every 3-6 months, even if not in use, to maintain optimal battery performance.
• Cleanliness: Keep the unit clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Storage Conditions: Store the jump starter in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
• Durability: The hardened plastic and scratch-resistant shell are designed to withstand drops, but avoid unnecessary impacts.

Image: The GOOLOO GP2000 unit highlighting its 24-month standby capability, indicating long-term charge retention.

10. Troubleshooting

If you encounter issues with your GP2000, refer to the following common problems and solutions:

11. Specifications

12. Warranty and Support

GOOLOO is committed to providing reliable products and customer satisfaction.

• Warranty: The GOOLOO GP2000 comes with an 18-month warranty from the date of purchase.
• Return Guarantee: Enjoy a 30-day unconditional return guarantee.
• Customer Support: GOOLOO offers 24/7 customer support and lifetime technical assistance.

For further assistance, please visit the official GOOLOO Store on Amazon or contact customer service directly.