TECETOOL Dual Flush Valve Replacement Button

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your TECETOOL Dual Flush Valve Replacement Button. Please read these instructions carefully before proceeding with installation to ensure correct function and longevity of the product.

2. Product Overview

The TECETOOL Dual Flush Valve Replacement Button is designed to replace existing dual flush buttons in compatible toilet systems. It features a dual push mechanism for water-saving flushing options.

Figure 2.1: Overview of the TECETOOL Dual Flush Valve Replacement Button and its included components.

3. Compatibility

This replacement button is specifically designed for Roca toilets equipped with a top push button and is compatible with Roca flush valve models AH0002000R and AH0004800R. It is crucial to verify compatibility by measuring your original toilet tank button and confirming it matches the specifications provided.

Figure 3.1: Illustration showing the distinction between universal and specific flush button models, highlighting compatibility with specific flush valves.

4. Package Contents

The package includes the following items:

• 1 x Toilet Push Button Body
• 1 x Moon-shaped Button (for partial flush)
• 1 x Sun-shaped Button (for full flush)
• 2 x Button Rods (45mm length each)
• 1 x Black Screw (29mm)
• 1 x Plastic Button Screwdriver

Figure 4.1: All components included in the product package. Please ensure all parts are present before installation.

5. Specifications

Figure 5.1: Key dimensions of the replacement button and its components.

6. Setup and Installation

Follow these steps to install the replacement button:

1. Measure Original Button: Before starting, carefully measure the length of your existing toilet tank button and its rods. This replacement button has a 76mm body length and 76mm rods. Ensure these dimensions are suitable for your toilet.
2. Disassemble Old Button: Remove the old flush button from your toilet tank lid. This usually involves unscrewing or unclipping it.
3. Assemble New Button: Insert the moon-shaped and sun-shaped buttons into the main button body.
4. Attach Rods: Insert the two button rods into their respective slots on the flush valve mechanism. The rods can be cut to the required length using a suitable tool if they are too long for your specific toilet tank depth.
5. Secure Button: Place the assembled button body into the opening on the toilet tank lid. Ensure the rods align correctly with the flush valve.
6. Tighten: Use the provided black screw and plastic screwdriver to secure the button assembly from underneath the tank lid. Do not overtighten.
7. Test Functionality: Press both the partial and full flush buttons to ensure they operate the flush valve correctly and return to their original position smoothly.

Figure 6.1: The 76mm button properly installed into a flush valve mechanism.

7. Operation

The TECETOOL Dual Flush Valve Replacement Button offers two flushing options to conserve water:

• Partial Flush (Quick Flush): Press the smaller, moon-shaped button for a reduced water flush (typically 3 liters). This is suitable for liquid waste.
• Full Flush: Press the larger, sun-shaped button for a complete water flush (typically 6 liters). This is suitable for solid waste.

Figure 7.1: Demonstrates the two flush options: Quick flush (3L) and Full flush (6L).

8. Maintenance

To ensure optimal performance and appearance of your flush button:

• Clean the button surface regularly with a soft, damp cloth.
• Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
• Periodically check that the button operates smoothly and is securely fastened.

9. Troubleshooting

If you encounter issues with your TECETOOL Dual Flush Valve Replacement Button, consider the following:

• Button Does Not Fit: Double-check the measurements of your original button and compare them with the specifications in Section 5. This button is specifically for 76mm length and compatible Roca flush valves.
• Flush Not Activating: Ensure the button rods are correctly aligned with the flush valve mechanism and are of the appropriate length. If the rods are too long, they may prevent the button from fully depressing. If too short, they may not engage the valve.
• Button Sticks: Verify that the button assembly is not overtightened and that there are no obstructions preventing smooth movement.
• Missing Parts: If any parts were missing upon arrival, please contact customer support immediately.

10. Warranty and Support

For any questions, concerns, or support regarding your TECETOOL Dual Flush Valve Replacement Button, please contact the seller or manufacturer directly. Please refer to your purchase documentation for specific warranty details.

Manufacturer: TECETOOL