Pxwaxpy SLM03204 Solar Motion Sensor Light User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Pxwaxpy SLM03204 Solar Motion Sensor Light. Please read this manual carefully before use to ensure proper function and longevity of the product.

2. Product Overview

The Pxwaxpy SLM03204 is an outdoor solar-powered light equipped with a motion sensor, designed to provide illumination for various outdoor areas. Its key features include:

Split Solar Panel Design: Allows flexible placement of the solar panel for optimal sun exposure, connected to the light unit by a 5-meter (16.4ft) cable.
High Brightness: Features 204 ultra-bright LEDs, delivering up to 2000 lumens of cool white light (7000K).
Three Lighting Modes: Adaptable to different security and lighting needs.
Efficient Solar Charging: Equipped with a 2200mAh battery and a polysilicon solar panel with up to 22% conversion efficiency.
Advanced Sensing: Integrated daylight sensor and a highly sensitive PIR motion sensor with a 120° detection angle and a range of 3-8 meters (10-26 feet).
Durable Construction: IP65 waterproof rating, made from ABS and PC materials, resistant to heat and frost.

Pxwaxpy Solar Motion Sensor Light with independent solar panel, showing features like 2200mAh battery, solar powered, motion sensor, 3 lighting modes, IP65 waterproof, and 5M prolong cord. — **Figure 1:** Overview of the Pxwaxpy Solar Motion Sensor Light and its key features.

3. Setup and Installation

The Pxwaxpy solar light offers flexible installation options. The solar panel can be installed separately from the light unit, allowing for optimal sun exposure. The ideal installation height for the light unit is approximately 1.8 to 2.5 meters (5.9 to 8.2 feet).

3.1 Installation Options

Diagram showing two installation methods for the Pxwaxpy solar light: separate installation with the solar panel on the roof and the light on the wall, and integrated installation with both components on the wall. — **Figure 2:** Separate and Integrated Installation Methods.

This image illustrates the flexibility of the Pxwaxpy solar light's installation. It can be installed with the solar panel separate from the light unit, connected by a 5-meter cable, allowing the panel to be placed in direct sunlight while the light illuminates a desired area. Alternatively, the solar panel and light unit can be integrated and mounted together on a single surface.

3.2 Step-by-Step Installation

Follow these steps for quick installation:

Mount the Bracket: Drill holes and secure the mounting bracket to the desired wall using the included screws and expansion tubes.
Attach Solar Panel: Attach the solar panel to its bracket and then to the wall, ensuring it faces an area with maximum direct sunlight. The solar panel can be adjusted up to 135° for optimal angle.
Select Mode: Before final assembly, press the mode button on the light unit to select your desired operating mode (see Section 4 for details).
Attach Light Unit: Slide the light unit onto its mounting bracket.
Connect Cable: Connect the 5-meter cable from the solar panel to the light unit. Ensure a secure connection.
Final Adjustment: Ensure all components are securely fastened and the light unit is aimed correctly.

Step-by-step guide for installing the Pxwaxpy solar motion sensor light, showing mounting the bracket, attaching the solar panel, pressing the mode button, attaching the light, connecting the cable, and the final assembly. — **Figure 3:** Detailed Installation Steps.

This visual guide details the quick installation process. It shows securing the mounting bracket, attaching the solar panel, selecting the operating mode via the button, sliding the light unit onto its bracket, connecting the 5-meter cable between the solar panel and the light, and the completed setup.

4. Operating Instructions

The Pxwaxpy solar light features three distinct operating modes, selectable via the push-button switch on the unit. The light operates only in darkness due to its integrated daylight sensor.

Diagram illustrating the three operating modes of the Pxwaxpy solar motion sensor light: Mode 1 (Strong Light Sensor), Mode 2 (Dim Light Sensor), and Mode 3 (Dim Light Long Mode). — **Figure 4:** Three Operating Modes.

This image explains the three distinct lighting modes. Mode 1 provides strong light for 20 seconds upon motion detection, remaining off otherwise. Mode 2 offers dim light constantly, switching to strong light for 20 seconds when motion is detected. Mode 3 maintains a constant dim light throughout the night without motion sensing.

4.1 Mode Selection

Mode 1 (Strong Light Sensor Mode): The light remains off when no motion is detected. Upon detecting motion, it illuminates with strong light for approximately 20 seconds, then turns off.
Mode 2 (Dim Light Sensor Mode): The light stays in a dim state when no motion is detected. Upon detecting motion, it switches to strong light for approximately 20 seconds, then returns to dim light.
Mode 3 (Dim Light Long Mode): The light automatically turns on at a constant dim brightness at night and turns off during the day. The motion sensor function is inactive in this mode.

To switch between modes, press the push-button switch located on the light unit. Each press cycles to the next mode.

5. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your solar light.

Clean Solar Panel: Periodically wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures maximum sunlight absorption and charging efficiency.
Clear Obstructions: Ensure no trees, bushes, or other objects obstruct direct sunlight from reaching the solar panel, especially during peak charging hours.
Inspect Connections: Occasionally check the cable connection between the solar panel and the light unit to ensure it is secure and free from damage.
Weather Resistance: The light is IP65 waterproof, heat, and frost resistant. No special protection is needed for typical outdoor weather conditions.

Image highlighting the IP65 waterproof rating of the Pxwaxpy solar light, showing it functioning effectively in rain and extreme temperatures from -40°C to 85°C, indicating heat and frost resistance. — **Figure 5:** IP65 Waterproof and Weather Resistance.

This image emphasizes the durability of the Pxwaxpy solar light, showcasing its IP65 waterproof rating. It is designed to withstand various weather conditions, including rain, and operate reliably in temperatures ranging from -40°C to 85°C, ensuring heat and frost resistance.

6. Troubleshooting

If your Pxwaxpy solar light is not functioning as expected, consider the following common issues and solutions:

Problem	Possible Cause	Solution
Light does not turn on at night.	Insufficient solar charge; daylight sensor detects light; mode not selected.	Ensure solar panel is in direct sunlight for 6-8 hours. Check for ambient light near the sensor. Press the mode button to activate a mode.
Light is dim or only stays on for a short time.	Battery not fully charged; solar panel is dirty or obstructed.	Clean the solar panel. Relocate the solar panel to an area with more direct sunlight. Allow several days for full charge.
Motion sensor is not detecting movement.	Light is in Mode 3; sensor range obstructed; sensor angle incorrect.	Switch to Mode 1 or Mode 2. Ensure no obstructions in front of the sensor. Adjust the light unit's angle.
Light flickers or behaves erratically.	Loose connection; low battery.	Check the cable connection between the solar panel and light unit. Ensure the solar panel receives adequate sunlight for charging.

7. Specifications

Detailed technical specifications for the Pxwaxpy SLM03204 Solar Motion Sensor Light:

Feature	Specification
Brand	Pxwaxpy
Model Number	SLM03204
Light Source	204 LED beads
Brightness	2000 Lumens (Max)
Light Color	Cool White (7000 Kelvin)
Battery Capacity	2200mAh
Solar Panel Type	Polysilicon
Solar Conversion Rate	Up to 22%
Motion Sensor Angle	120°
Motion Sensor Distance	3-8 meters (10-26 feet)
Cable Length	5 meters (16.4 feet)
Waterproof Rating	IP65
Material	Acrylonitrile Butadiene Styrene (ABS), Polycarbonate (PC)
Product Dimensions (L x W x H)	30L x 20W x 10H centimeters
Voltage	5 Volts
Wattage	13.33 Watts
Control Method	Push-button (Tactile)
Recommended Use	Garden, patio, driveway, front door, garage, fence

Image demonstrating the Pxwaxpy solar light's 204 LED, 2000LM super brightness, 120-degree sensing angle, and 3-8 meter sensing distance illuminating an outdoor area with people walking. — **Figure 6:** Brightness and Sensing Capabilities.

This image illustrates the powerful illumination and wide detection capabilities of the Pxwaxpy solar light. It features 204 LEDs providing 2000 lumens of brightness, a 120-degree motion sensing angle, and a detection range of 3 to 8 meters, effectively lighting up outdoor spaces.

Diagram showing the 2200mAh capacity battery of the Pxwaxpy solar light, with a smart light sensor enabling charging by solar light during the day and automatic illumination at night. — **Figure 7:** Battery Capacity and Charging Cycle.

This image details the power management of the Pxwaxpy solar light. It features a 2200mAh battery that charges efficiently from sunlight during the day, thanks to its smart light sensor. The light automatically activates at night, providing illumination without manual intervention.

8. Warranty and Support

Your Pxwaxpy SLM03204 Solar Motion Sensor Light comes with a comprehensive warranty and dedicated support.

Warranty: A 2-year limited warranty is provided from the date of purchase.
Technical Support: Lifetime technical support is available for any product-related inquiries or assistance.
Included Components: Each package contains 1 LED solar light, 4 sets of screws, 4 expansion tubes, and 1 user manual.

For warranty claims or technical assistance, please refer to the contact information provided with your purchase or visit the official Pxwaxpy website.