Introduction
Thank you for choosing the DELIPOP Industrial E27 Ceiling Light. This vintage-style light fixture features a geometric metal cage design, offering both illumination and a decorative touch to your interior spaces. Crafted from high-quality iron with a multi-layer baking paint finish, it is designed for durability and resistance to corrosion. This manual provides essential information for safe installation, operation, and maintenance of your new ceiling light.
Important Safety Information
Please read all instructions carefully before installation and use. Retain this manual for future reference.
- Electrical Safety: Always turn off the main power supply at the circuit breaker before beginning any electrical work. If you are unsure about electrical installations, consult a qualified electrician.
- Voltage: Ensure the voltage supply matches the product's requirements (220V).
- Bulb Type: Use only E27 base bulbs with a maximum wattage of 60W.
- Indoor Use: This product is designed for indoor use only and is not water-resistant.
- Assembly: Assembly is required. Ensure all components are securely fastened before use.
Package Contents
Verify that all parts are present before installation:
- 1 x DELIPOP Industrial E27 Ceiling Light Fixture
- Mounting Hardware (screws, wall anchors)
- Installation Accessories
Note: Light bulb is not included.
Setup and Installation
Follow these steps for proper installation. It is recommended to have two people for installation.
- Turn Off Power: Before starting, ensure the power supply to the installation area is completely turned off at the main circuit breaker.
- Prepare Mounting Surface: Mark the drilling points on the ceiling for the flush-mounted bracket.
- Install Mounting Bracket: Drill holes at the marked points and insert wall anchors if necessary. Secure the flush-mounted bracket to the ceiling using the provided screws.
- Wiring: Connect the household electrical wires to the light fixture's wires. Typically, connect the live wire (usually brown or red) to the live terminal, the neutral wire (usually blue or black) to the neutral terminal, and the ground wire (usually green/yellow) to the ground terminal. Ensure all connections are secure.
- Attach Lamp Body: Carefully align the lamp body with the mounted bracket and secure it with the provided screws or fasteners.
- Install Bulb: Screw an E27 base bulb (max 60W, not included) into the lamp holder.
- Restore Power: Once installation is complete and all connections are secure, turn the main power supply back on.
Figure 1: Components and Installation Diagram. This image illustrates the main parts of the light fixture and how they connect during installation.
Figure 2: Detailed Components. A closer look at the flush mounted bracket, E27 lamp cap, and the sturdy iron lamp body.
Operating Instructions
The DELIPOP Industrial E27 Ceiling Light operates via a standard wall switch (not included) connected to your home's electrical system.
- Turning On/Off: Use the wall switch to turn the light fixture on or off.
- Bulb Compatibility: This fixture is compatible with all E27 base bulbs, including LED, halogen, and Edison bulbs. Ensure the bulb's wattage does not exceed 60W.
Figure 3: Dimensions and Compatible E27 Bulbs. This image displays the physical dimensions of the light fixture and examples of E27 base bulbs that can be used.
Maintenance
Regular maintenance will help prolong the life and appearance of your ceiling light.
- Cleaning: Always turn off the power before cleaning. Use a soft, dry cloth to wipe the metal cage and base. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Bulb Replacement: Ensure the power is off and the bulb has cooled down before attempting to replace it. Unscrew the old E27 bulb and screw in a new one (max 60W).
Troubleshooting
If you encounter issues with your DELIPOP ceiling light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Faulty bulb Loose wiring connection | Check circuit breaker and wall switch Replace bulb Turn off power and check wiring connections |
| Light flickers | Loose bulb Incompatible bulb Faulty wiring | Tighten bulb Ensure bulb is E27 and within 60W Turn off power and check wiring connections |
| Light is dim | Low wattage bulb Voltage issue | Install a higher wattage bulb (up to 60W) Consult an electrician to check voltage supply |
If the problem persists after trying these solutions, please contact customer support or a qualified electrician.
Specifications
| Feature | Detail |
|---|---|
| Brand | DELIPOP |
| Model Number | DE-LED-8 |
| Color | Black |
| Material | Iron |
| Style | Retro |
| Ceiling Light Shape | Pendant (Geometric Cage) |
| Room Type | Kitchen, Living Room, Hallway, Porch, Bedroom |
| Specific Uses | Home |
| Indoor/Outdoor Use | Indoor |
| Power Source | Corded Electric |
| Control Method | Wall Switch (not included) |
| Bulb Type Compatibility | LED, Halogen, Edison (E27 Base) |
| Number of Lights | 1 |
| Voltage | 220 Volts |
| Light Color | Depends on bulb installed |
| Light Direction | Downlight |
| Wattage (Max) | 60 Watts |
| Bulb Base | E27 |
| Water Resistance Level | Not Water Resistant |
| Luminous Flux | 900 lm (with compatible bulb) |
| EU Energy Efficiency Label | E |
| Mounting Type | Ceiling Mount, Semi-Flush Mount |
| Assembly Required | Yes |
| Shade Color | Black |
| Finish Type | Painted |
| Shade Material | Iron |
| Item Dimensions (LxWxH) | 16L x 16W x 18H cm |
Figure 4: EU Energy Efficiency Label. For more details, visit eprel.ec.europa.eu/qr/1551538.
Warranty and Support
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. DELIPOP is committed to providing high-quality lighting products and customer satisfaction.