1. Introduction
This manual provides essential information for the assembly, care, and maintenance of your nanoblock Chiikawa mininano Series Building Kit. This set includes six distinct Chiikawa characters: Chiikawa, Hachiware, Usagi, Momonga, Kurimanju, and Racco. Each figure is designed for detailed construction using micro-sized building blocks.
nanoblock kits offer a unique building experience, resulting in highly detailed, miniature models. Please read all instructions carefully before beginning assembly.

Image: The complete set of six nanoblock Chiikawa mininano figures.
2. Safety Information
WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.
- Keep all small parts away from young children and pets to prevent accidental ingestion.
- Adult supervision is recommended for builders under the age of 12, as the blocks are very small and require fine motor skills.
- Do not put blocks in your mouth.
- Dispose of packaging materials responsibly.
3. What's in the Box
Your nanoblock Chiikawa mininano Series Building Kit (Complete Set of 6) includes the following components:
- Individual nanoblock sets for each of the six Chiikawa characters.
- Detailed step-by-step instruction sheets for each character's assembly.
- Assorted micro-sized building blocks required for each figure.
Please verify that all components are present upon opening the package. If any parts are missing, refer to the 'Warranty and Support' section.

Image: The product packaging for the nanoblock Chiikawa mininano Series.
4. Assembly Instructions
Each nanoblock Chiikawa figure comes with its own specific, detailed instruction sheet. Follow these general guidelines for a successful building experience:
- Preparation: Open one character set at a time. Lay out the blocks on a clean, flat surface. It is helpful to sort blocks by color and size before you begin.
- Follow Instructions: Refer to the included step-by-step diagrams for each character. Pay close attention to the orientation and placement of each block.
- Precision: nanoblocks are very small. Use tweezers (not included) if you find it difficult to place blocks with your fingers. Ensure blocks are firmly pressed together to secure connections.
- Layer by Layer: Most nanoblock models are built layer by layer from the base upwards. Complete each layer before moving to the next.
- Check Your Work: Periodically compare your progress with the instruction diagrams to catch any errors early.

Image: A nanoblock figure held in a hand, demonstrating its miniature scale.

Image: A nanoblock figure with a height measurement of approximately 3 cm.
5. Operating Instructions (Handling)
Once assembled, your nanoblock figures are delicate models. Handle them with care to prevent disassembly.
- Display: Place your finished figures on a stable, flat surface where they are unlikely to be knocked over.
- Movement: When moving a figure, support it from the base to maintain its structural integrity. Avoid picking it up by small, protruding parts.
- Disassembly: If you wish to disassemble a figure, do so gently, reversing the assembly steps. This can be useful for storing blocks or rebuilding.
6. Maintenance and Care
Proper care will ensure your nanoblock figures remain in excellent condition.
- Cleaning: To remove dust, use a soft brush (like a clean makeup brush or a soft-bristled toothbrush) or a can of compressed air. Avoid using water or harsh cleaning agents, as these can damage the blocks or printed details.
- Storage: If disassembling for storage, keep blocks in a sealed container to prevent loss and protect them from dust and moisture.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause colors to fade over time. Display figures in a shaded area.
7. Troubleshooting
Here are solutions to common issues you might encounter:
- Missing Blocks: Carefully check the packaging and your building area. If blocks are genuinely missing from a new, unopened set, refer to the 'Warranty and Support' section for assistance.
- Difficulty Connecting Blocks: Ensure blocks are correctly aligned. Apply gentle, even pressure. If a block is particularly stubborn, try wiggling it slightly while pressing.
- Figure is Unstable: Double-check all connections, especially the base layers. Ensure all blocks are fully pressed down and correctly interlocked according to the instructions.
- Instructions are Unclear: Review the diagrams carefully. Sometimes rotating the instruction sheet or the model can help clarify the next step. Online communities or official nanoblock resources may also offer visual guides.
8. Specifications
| Attribute | Detail |
|---|---|
| Product Dimensions (average figure) | 0.79 x 0.94 x 1.3 inches (approx. 2 x 2.4 x 3.3 cm) |
| Item Weight (entire set) | 5.6 ounces (approx. 158.7 grams) |
| Model Number | AMZ-NAN22756 |
| ASIN | B0C6F2VBPC |
| Manufacturer Recommended Age | 12 years and up |
| Material | Plastic |
9. Warranty and Support
This nanoblock product is an officially licensed Kawada product, distributed by Bandai Namco for the U.S. Markets. The product box includes a Bandai Namco warning label, which serves as proof of authenticity and entitles the purchaser to product support assistance within the United States.
For product support, including inquiries about missing parts or manufacturing defects, please contact Bandai Namco's customer service. Keep your proof of purchase and the product packaging, including the warning label, as they may be required for support.
This product has been thoroughly tested for safety and meets all North American consumer product safety regulations.