Weiser 9GED92400-004

Weiser Elements Keyless Entry Door Lock User Manual

Model: 9GED92400-004

Weiser Elements Matte Black Keyless Entry Door Lock

Image: Weiser Elements Matte Black Keyless Entry Door Lock, showing both exterior keypad and interior turn-button units.

1. Introduction

The Weiser Elements 5-Button Keypad Electronic Deadbolt Door Lock provides convenient keyless entry, enhancing security and simplifying access to your home. This manual provides detailed instructions for installation, operation, and maintenance of your new lock.

Key Features:

  • Convenient Keyless Entry: Secure and simple access without physical keys.
  • Easy Code Management: Customize up to 12 user codes, 2 one-time user codes, and 1 programming code.
  • Auto Lock: Customizable automatic locking after 30 sec, 1 min, 3 min, 5 min, or 10 min.
  • Intrusion Alert: Alarm sounds and keypad disables for 1 minute after 3 consecutive incorrect code entries.
  • Easy Low Light Code Entry: Bright LED lights illuminate the keypad for night use.
Applications of Weiser Elements Lock

Image: Examples of where the Weiser Elements lock can be used, including entry doors, sheds, side doors, and garage doors.

2. What's in the Box

Verify that all components are present before beginning installation:

  • Exterior Assembly Piece
  • Interior Assembly Piece
  • Mounting Plate
  • Interior Cover
  • Screws (various sizes)
  • Drive-in Collar
  • Latch
  • Strike Plate
  • Installation Manual
  • 2 Keys
Contents of Weiser Elements Lock Box

Image: All components included in the Weiser Elements Keyless Entry Door Lock package, laid out for inspection.

3. Setup and Installation

Installation of the Weiser Elements lock is designed to be straightforward, requiring only a screwdriver. For detailed, step-by-step instructions, refer to the included Installation Manual. It is recommended to follow the manual precisely to ensure proper function and security.

General Installation Steps:

  1. Prepare the door: Ensure the door bore hole and backset are compatible with the lock's dimensions.
  2. Install the latch: Insert the latch into the door edge and secure it.
  3. Install the exterior assembly: Place the exterior keypad unit through the door.
  4. Install the mounting plate: Secure the mounting plate to the door.
  5. Install the interior assembly: Connect the interior unit to the mounting plate.
  6. Install batteries: Insert the required batteries (4x AA alkaline batteries, not included) into the interior assembly.
  7. Perform door handing process: This calibrates the lock to your door's orientation.
  8. Test the lock: Verify both key and keypad functions.

For visual and interactive guidance, consider using the BILT 3D interactive instructions if available, which provide voice, text, and animation for an easy installation process.

4. Operating Instructions

4.1. Keyless Entry

To unlock the door using the keypad, enter your valid user code. The lock will retract the deadbolt, allowing entry.

Keyless Entry Operation

Image: A person using the keypad for keyless entry, demonstrating the convenience of the system.

4.2. Code Management

The lock supports up to 12 unique user codes and 2 one-time user codes. A single programming code allows you to add, edit, or delete these user codes. Refer to your Installation Manual for specific steps on programming codes.

Code Management Features

Image: Visual representation of the lock's capacity for 12 user codes and 2 one-time user codes.

4.3. Auto Lock Feature

For enhanced security, the Auto Lock feature can be enabled to automatically re-lock the door after a set period. You can customize the auto-lock delay to 30 seconds, 1 minute, 3 minutes, 5 minutes, or 10 minutes.

Auto Lock Functionality

Image: A person and dog leaving a house, illustrating the convenience of the Auto Lock feature with customizable time settings.

4.4. Easy Low Light Code Entry

The keypad features bright LED lights that illuminate the buttons, making it easy to enter your user code even in low light conditions or at night. Simply tap the keypad to activate the lights.

Low Light Keypad Illumination

Image: The illuminated keypad of the Weiser Elements lock at night, showing its visibility in low light conditions.

4.5. Vacation Mode

Activate Vacation Mode to temporarily disable the keypad. This feature provides added security when you are away for an extended period, ensuring no one can operate your door lock via the keypad.

Vacation Mode Feature

Image: A couple with luggage, illustrating the use of Vacation Mode for security while away from home.

4.6. One-Touch Locking

The motorized deadbolt allows for convenient one-touch locking. Simply press the lock button on the keypad to secure your door without needing to carry keys or manually engage the deadbolt.

One-Touch Locking

Image: A finger pressing the lock button on the keypad, demonstrating the one-touch locking feature.

5. Maintenance

5.1. Battery Life

The Weiser Elements lock is designed for long-lasting performance. A set of 4x AA alkaline batteries (not included) provides approximately 12 months of battery life, depending on usage. Replace batteries when the low battery indicator appears or when the lock's operation becomes sluggish.

To replace batteries, remove the interior cover and insert new batteries according to the polarity markings. Always use fresh, high-quality alkaline batteries.

6. Troubleshooting

6.1. Intrusion Alert

If 3 consecutive incorrect user codes are entered on the keypad, the lock will activate an intrusion alert. The keypad will flash red 15 times, and an alarm will sound 15 times. During this period, the keypad will be disabled for 1 minute to prevent further tampering.

After the 1-minute lockout period, the keypad will reset, and you can attempt to enter a valid code again. If you frequently encounter this, ensure you are entering the correct user codes and that the programming code has not been compromised.

Intrusion Alert Mechanism

Image: Diagram illustrating the intrusion alert system, showing the keypad flashing red and sounding an alarm after multiple incorrect code entries.

6.2. Lock Not Responding

  • Check batteries: Ensure batteries are fresh and installed correctly.
  • Verify code: Double-check that the correct user code is being entered.
  • Reset: If issues persist, refer to the Installation Manual for instructions on performing a factory reset.

7. Specifications

Feature Detail
Brand Weiser
Model Number 9GED92400-004
Product Dimensions 2.46 x 7.14 x 11.66 cm (0.97 x 2.81 x 4.59 inches)
Item Weight 710 g (1.56 lbs)
Colour Matte Black
Style Traditional
Finish Painted
Material Metal, Plastic
Number of Pieces 2 (Exterior and Interior Assembly)
Special Features Auto-Lock, BHMA/ANSI Grade 3, Light Up Keypad, Motorized Locking, Vacation Mode (Disable Keypad)
Usage Amateur, Professional (Recommended for Front, Back, Side, Garage, Shed, AirBnb Doors)
Batteries Required No (4x AA alkaline batteries are required for operation, but not included)
Lock Type Keypad, Pin Tumbler
Country of Origin China
Weiser Elements Lock Dimensions

Image: Detailed dimensions of the Weiser Elements Keyless Entry Door Lock, including exterior and interior units and adjustable latch backset.

8. Warranty and Support

8.1. Warranty Information

The Weiser Elements Keyless Entry Door Lock comes with a 1-Year Limited Electronics Warranty and a Lifetime Limited Mechanical & Finish Warranty. Please retain your proof of purchase for warranty claims.

8.2. Customer Support

For further assistance, technical support, or warranty inquiries, please visit the official Weiser website or contact their customer service department. Contact information can typically be found in the included Installation Manual or on the Weiser brand website.

Related Documents - 9GED92400-004

Preview Weiser Powerbolt 2 Keyless Entry Door Lock Installation and User Guide
Comprehensive guide for installing and using the Weiser Powerbolt 2 Matte Black Keyless Entry Door Lock/Deadbolt Lock. Includes instructions for setup, programming user codes, changing master codes, and troubleshooting.
Preview Weiser Elements Installation and User Guide
Comprehensive installation and user guide for the Weiser Elements electronic door lock, detailing setup, operation, and troubleshooting.
Preview Weiser Powerbolt 2 Keyless Entry Door Lock Installation and User Guide
Comprehensive guide for installing and using the Weiser Powerbolt 2 touchpad keyless entry door lock, including setup, programming, troubleshooting, and safety information.
Preview Weiser Powerbolt 2 Touchpad Keyless Entry Installation and User Guide
Comprehensive installation and user guide for the Weiser Powerbolt 2 Touchpad Keyless Entry lock, covering setup, programming, troubleshooting, and important safety information.
Preview Weiser SmartCode Keypad Electronic Locks Quick Start Guide and Installation Instructions
Comprehensive guide for installing, programming, and using Weiser SmartCode Keypad Electronic Locks, covering parts, tools, step-by-step installation, programming features, system alerts, and important safeguards.
Preview Weiser Powerbolt 2 Electronic Deadbolt: Installation and Usage Guide
Comprehensive guide for the Weiser Powerbolt 2 electronic deadbolt, covering door handing, adding user codes, and removing user codes. Features SmartKey technology.