iLive Wireless Bluetooth Sound Bar User Manual

Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your iLive Wireless Bluetooth Sound Bar. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Package Contents

• iLive Wireless Bluetooth Sound Bar
• Power Adapter
• User Manual
• (Additional cables if typically included, e.g., AUX cable)

Product Overview

Familiarize yourself with the components of your sound bar.

Image: Front view of the iLive Wireless Bluetooth Sound Bar, showcasing its sleek black design and central control knob.

Image: The iLive Wireless Bluetooth Sound Bar shown with its approximate dimensions: 17.2 inches in length, 3.2 inches in depth, and 3.5 inches in height.

Setup

1. Placement

Place the sound bar on a stable, flat surface, preferably below your television or monitor. Ensure there is adequate ventilation around the unit.

2. Power Connection

1. Connect the provided power adapter to the DC IN port on the back of the sound bar.
2. Plug the other end of the power adapter into a standard wall outlet.

3. Audio Connection (Optional)

While primarily a Bluetooth device, some models may offer wired connections. If available, connect an audio cable (e.g., 3.5mm AUX) from your audio source (TV, computer) to the corresponding input port on the sound bar.

Operating Instructions

1. Powering On/Off

• To power on the sound bar, press the Power button (or central knob if it functions as power).
• To power off, press and hold the Power button until the unit shuts down.

2. Bluetooth Pairing

1. Ensure the sound bar is powered on and in Bluetooth mode (indicated by a specific LED light or voice prompt). If not, press the Mode button to switch to Bluetooth.
2. On your mobile device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
3. Select "iLive ISB172B" or a similar name from the list of found devices.
4. Once paired, the sound bar will indicate a successful connection, and you can begin playing audio from your device.

3. Volume Control

Adjust the volume using the volume controls on the sound bar itself, or via the connected Bluetooth device.

4. Input Selection

If your sound bar supports multiple inputs (e.g., Bluetooth, AUX), press the Mode button to cycle through the available input sources.

Maintenance

Cleaning

• Before cleaning, ensure the sound bar is powered off and unplugged from the power outlet.
• Use a soft, dry cloth to wipe the exterior surfaces.
• Do not use liquid cleaners, aerosols, or abrasive chemicals, as these may damage the finish or internal components.

Storage

When not in use for extended periods, store the sound bar in a cool, dry place, away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

Warranty and Support

This product comes with a manufacturer's warranty. For detailed information regarding warranty coverage and terms, please refer to the warranty card included with your product or visit the official iLive Electronics website.

For technical support, troubleshooting assistance, or service inquiries, please contact the manufacturer, DPI INC, or visit their support portal. Contact information can typically be found on the product packaging or the manufacturer's official website.