Introduction
Thank you for purchasing the Fuse Andle Vintage Retro Bluetooth Speaker. This portable speaker combines classic design with modern audio technology, offering versatile playback options and a rich sound experience. Please read this manual carefully before using the device to ensure proper operation and to maximize its lifespan.
Product Overview
Package Contents
- Fuse Andle Bluetooth Speaker
- USB Charging Cable
- User Manual
Component Identification
Figure 1: Top Panel Controls
- 1. Volume Knob: Adjusts the master volume level.
- 2. Bass Knob: Adjusts the bass frequency level.
- 3. Treble Knob: Adjusts the treble frequency level.
- 4. Mode Button: Switches between Bluetooth, AUX, USB, and Micro SD modes.
- 5. Previous Button: Skips to the previous track.
- 6. Next Button: Skips to the next track.
- 7. Play/Pause Button: Plays or pauses audio. Also answers/ends calls.
- 8. On/Off Button: Powers the speaker on or off.
- 9. BT/AUX/Charging Indicator: LED light indicating current mode or charging status.
Figure 2: Back Panel Ports
- 1. TF (Micro SD) Card Slot: For Micro SD card playback.
- 2. USB Port: For USB drive playback.
- 3. AUX Input: 3.5mm audio input for wired connection.
- 4. DC Input: Charging port for the speaker.
Setup
Charging the Speaker
Before first use, fully charge the speaker. Connect the provided USB charging cable to the DC Input port on the back of the speaker (Figure 2, item 4) and the other end to a USB power adapter (not included) or a computer USB port. The charging indicator light will illuminate during charging and turn off when fully charged. A full charge takes approximately 9 hours and provides up to 12 hours of playback.
Connect the charging cable to the DC input port.
Operating Instructions
Power On/Off
Press and hold the On/Off Button (Figure 1, item 8) for a few seconds to power the speaker on or off.
Bluetooth Mode
- Ensure the speaker is powered on. It will automatically enter Bluetooth pairing mode, indicated by a flashing Bluetooth indicator light.
- On your smartphone or other Bluetooth-enabled device, enable Bluetooth and search for available devices.
- Select "Fuse Andle" from the list of devices. Once connected, the indicator light will become solid, and you will hear a confirmation tone.
- You can now play audio from your device through the speaker. Use the Volume Knob, Previous, Next, and Play/Pause buttons on the speaker, or control playback directly from your device.
Seamlessly connect your smartphone via Bluetooth 5.1 for wireless audio streaming.
AUX Mode
Connect a 3.5mm audio cable (not included) from your audio source to the AUX Input port (Figure 2, item 3) on the speaker. Press the Mode Button (Figure 1, item 4) until the speaker enters AUX mode. Audio will now play through the wired connection.
USB & Micro SD Card Playback
Insert a USB flash drive into the USB Port (Figure 2, item 2) or a Micro SD card into the TF Card Slot (Figure 2, item 1). The speaker will automatically detect the media and begin playback. If not, press the Mode Button (Figure 1, item 4) to switch to the correct input mode. Supported audio formats include MP3, WAV, and WMA.
The speaker supports playback from USB drives and Micro SD cards.
Making/Receiving Calls (Bluetooth Mode)
- Answering a Call: When a call comes in, press the Play/Pause Button (Figure 1, item 7) once to answer.
- Ending a Call: During a call, press the Play/Pause Button (Figure 1, item 7) once to end the call.
- Rejecting a Call: Press and hold the Play/Pause Button (Figure 1, item 7) for 2 seconds to reject an incoming call.
Maintenance
- Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Keep the speaker away from water, moisture, and extreme temperatures. The speaker is not waterproof.
- Avoid dropping the speaker or subjecting it to strong impacts.
- When not in use for extended periods, store the speaker in a cool, dry place and charge it periodically to maintain battery health.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Battery is depleted. | Charge the speaker fully. |
| No sound. | Volume is too low; incorrect mode selected; device not connected. | Increase volume; press Mode button to select correct input; ensure Bluetooth device is paired or AUX/USB/SD is properly inserted. |
| Bluetooth connection unstable or fails. | Device is too far from speaker; interference; speaker not in pairing mode. | Move device closer to speaker (within 10 meters); avoid obstacles; ensure speaker is in Bluetooth pairing mode. |
| Cannot play from USB/Micro SD. | Unsupported file format; media not inserted correctly; corrupted media. | Ensure files are MP3, WAV, or WMA; reinsert media; try different media. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Rad-Andle-Br |
| Brand | Fuse |
| Speaker Type | Bookshelf / Portable |
| Connectivity Technology | Bluetooth 5.1, USB, Micro SD, AUX |
| Compatible Devices | Smartphone, Laptop, Television |
| Product Dimensions | 3.9"D x 4.5"W x 6.6"H |
| Item Weight | 2.77 pounds (1.26 Kilograms) |
| Battery Life | Up to 12 Hours |
| Charging Time | Approx. 9 Hours |
| Speaker Maximum Output Power | 5 Watts |
| Bluetooth Range | Up to 10 meters (33 feet) |
| Water Resistance Level | Not Water Resistant |
| Included Components | Speaker unit, USB charging cable |
Product dimensions for the Fuse Andle speaker.
Warranty and Support
The Fuse Andle speaker comes with a Limited Warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or contact Fuse customer support. For technical assistance or further inquiries, please visit the official Fuse website or contact their customer service department.
Manufacturer: Fuse
UPC: 810080511255
