GLOBE Electric 32982 Motion Sensor Wall Sconce User Manual

Introduction

The GLOBE Electric 32982 1-Light Motion Sensor Wall Sconce is a weather-resistant outdoor lighting fixture designed to enhance security and ambiance. Featuring a matte black finish and clear seeded glass shade, this sconce offers 150-degree motion detection up to 30 feet away, providing brighter illumination when activated. It allows for customizable low-level light brightness settings (off, 30%, 50%, or 70%) to suit various needs and occasions. This manual provides essential information for safe installation, operation, and maintenance of your wall sconce.

Safety Information

WARNING: To avoid electric shock, ensure power is turned off at the circuit breaker before installation or servicing. All wiring connections must be in accordance with local and national electrical codes. If you are unsure about proper installation, consult a qualified electrician.

• Do not connect this fixture to an ungrounded electrical system.
• Do not exceed the maximum wattage specified for the bulb.
• Handle glass components with care to prevent breakage.
• Keep packaging materials away from children.

Package Contents

Verify that all components are present before beginning installation:

• 1x Wall Sconce
• 1x Glass Shade (Clear Seeded)
• Mounting Hardware
• Instruction Sheet (this manual)
• Note: E26/Medium Base 60W Bulb is sold separately and not included.

Figure 1: GLOBE Electric 32982 Motion Sensor Wall Sconce (Matte Black with Clear Seeded Glass Shade)

Specifications

Figure 2: Product Dimensions for Installation Planning

Setup and Installation

This wall sconce is designed for hardwired installation. Professional installation is recommended if you are not familiar with electrical wiring.

Before You Begin:

• Turn off power at the main circuit breaker or fuse box.
• Ensure the mounting surface is clean, dry, and structurally sound.
• Unpack all components and inspect for any damage.

Installation Steps:

1. Attach Mounting Hardware: Secure the mounting bracket to the junction box using the provided screws. Ensure the bracket is level and firmly attached.
2. Make Electrical Connections:
   • Connect the fixture's ground wire (usually bare copper or green) to the house ground wire.
   • Connect the fixture's hot wire (usually black) to the house hot wire (black).
   • Connect the fixture's neutral wire (usually white) to the house neutral wire (white).
   • Secure all connections with wire nuts and wrap with electrical tape for added safety.
3. Mount the Fixture: Carefully align the fixture with the mounting bracket and secure it using the provided screws or nuts. Ensure the fixture is flush against the wall.
4. Install Bulb: Screw in one E26/Medium Base 60W maximum bulb (sold separately). Compatible with LED and Incandescent bulbs.
5. Attach Glass Shade: Carefully place the clear seeded glass shade onto the fixture and secure it according to the design (e.g., with retaining ring or screws).
6. Restore Power: Once installation is complete, turn the power back on at the circuit breaker.

Figure 3: Example of Installed Wall Sconce

Operating Instructions

Your GLOBE Electric Motion Sensor Wall Sconce is designed for automatic operation based on motion detection and ambient light levels.

Motion Sensor Functionality:

• The integrated motion sensor detects movement within a 150-degree field and up to 30 feet away.
• When motion is detected, the light will illuminate at full brightness.
• The light will remain on as long as motion is detected within its range. After motion ceases, the light will turn off after a preset delay (typically a few minutes, consult specific product settings if adjustable).

Figure 4: Motion Activated Feature

Low-Level Light Brightness Adjustment:

This fixture allows you to adjust the low-level illumination when no motion is detected. This setting is typically controlled via a switch or dial on the fixture itself, or potentially through a compatible smart bulb if installed (sold separately).

• Off: The light remains off when no motion is detected.
• 30%: The light stays on at 30% brightness when no motion is detected.
• 50%: The light stays on at 50% brightness when no motion is detected.
• 70%: The light stays on at 70% brightness when no motion is detected.

Refer to the physical fixture for the exact location of the brightness adjustment control.

Maintenance

Regular maintenance will ensure the longevity and optimal performance of your wall sconce.

Cleaning:

• Always turn off power at the circuit breaker before cleaning.
• Wipe the fixture with a soft, damp cloth.
• Do not use abrasive cleaners or solvents, as these may damage the finish or glass.
• Clean the motion sensor lens periodically to ensure proper detection.

Bulb Replacement:

• Ensure power is off at the circuit breaker.
• Allow the bulb to cool completely before touching.
• Carefully remove the glass shade to access the bulb.
• Unscrew the old bulb and replace it with a new E26/Medium Base bulb, not exceeding 60W.
• Reattach the glass shade securely.
• Restore power.

Troubleshooting

If you experience issues with your wall sconce, refer to the following common problems and solutions:

Warranty and Support

This product is sold with No Warranty as per manufacturer specifications. For technical support or inquiries, please visit the official GLOBE Electric website or contact their customer service department.

GLOBE Electric Official Website: www.globe-electric.com