1. Introduction
Thank you for choosing the Brandt WDB184QWP Washing Machine. This manual provides essential information for the safe installation, operation, and maintenance of your appliance. Please read these instructions carefully before using the machine and keep them for future reference.
2. Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.
- Ensure the appliance is properly grounded.
- Do not allow children to play on or in the appliance.
- Do not operate the machine if it is damaged or malfunctioning.
- Unplug the appliance before cleaning or performing any maintenance.
- Do not wash items that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances.
3. Product Overview
Familiarize yourself with the components of your Brandt WDB184QWP washing machine.
Figure 1: Front view of the Brandt WDB184QWP Washing Machine. This image displays the front of the Brandt WDB184QWP washing machine. Key components visible include the detergent dispenser drawer on the top left, the central program selection knob, a digital display, and various function buttons on the control panel. The large circular door for loading laundry is prominently featured, and a service access panel is located at the bottom right.
Key Components:
- Detergent Dispenser Drawer: For adding detergent and fabric softener.
- Control Panel: Includes program selector knob, digital display, and function buttons.
- Door: For loading and unloading laundry.
- Service Access Panel: Located at the bottom right, for accessing the drain pump filter.
4. Installation
4.1 Unpacking
- Remove all packaging materials, including the transport bolts at the rear of the machine. Keep the transport bolts for future transport.
- Inspect the machine for any damage. If damaged, do not install or operate it.
4.2 Location
- Place the machine on a firm, level floor.
- Ensure adequate ventilation around the appliance.
- Avoid direct sunlight or extreme temperatures.
4.3 Water Connection
- Connect the cold water inlet hose to the cold water tap and the corresponding inlet valve on the machine.
- Ensure all connections are tight to prevent leaks.
4.4 Drain Connection
- Position the drain hose into a standpipe or over the edge of a sink, ensuring it is securely fixed to prevent displacement during operation.
- The drain hose should be at a height between 60 cm and 100 cm from the floor.
4.5 Electrical Connection
- Plug the power cord into a grounded electrical outlet.
- Ensure the voltage and frequency match the specifications of your machine (2.2E+2 Volts AC).
- Do not use extension cords or adapters.
4.6 Leveling the Machine
- Adjust the adjustable feet at the bottom of the machine until it is perfectly level and stable.
- A level machine reduces vibration and noise during operation.
5. Operating Instructions
5.1 Control Panel Overview
Refer to Figure 1 for the location of the control panel components.
- Program Selector Knob: Turn to select the desired wash program.
- Digital Display: Shows remaining time, error codes, and selected options.
- Function Buttons: Modify program settings (e.g., temperature, spin speed, delay start, extra rinse).
- Start/Pause Button: To start or pause a wash cycle.
5.2 Loading Laundry
- Open the door and load laundry loosely into the drum, ensuring not to overload.
- Close the door firmly until it clicks shut.
5.3 Adding Detergent and Additives
- Pull out the detergent dispenser drawer.
- Add detergent to the main wash compartment and fabric softener to its designated compartment.
- Close the dispenser drawer gently.
5.4 Program Selection
- Turn the Program Selector Knob to choose a suitable program for your laundry type (e.g., Cotton, Synthetics, Delicates, Quick Wash, Spin, Rinse).
- Adjust additional options like temperature or spin speed using the function buttons if desired.
5.5 Starting a Cycle
- Press the Start/Pause button to begin the selected wash cycle.
- The digital display will show the estimated remaining time.
5.6 Drying Cycle (for Washer-Dryer Function)
This appliance features an integrated drying function with a capacity of 6 kg.
- After a wash cycle, you can select a drying program or a combined wash and dry program.
- Ensure the load size is appropriate for the drying capacity (max 6 kg).
- Select the desired drying level (e.g., iron dry, cupboard dry) using the program selector or function buttons.
- Press Start/Pause to begin the drying cycle.
5.7 End of Cycle
- The machine will signal the end of the cycle.
- Wait for the door lock indicator to turn off before opening the door.
- Remove laundry promptly to prevent creasing.
6. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your washing machine.
6.1 Cleaning the Detergent Dispenser
- Pull out the dispenser drawer completely.
- Remove any residue and rinse under running water.
- Clean the housing of the dispenser drawer with a brush.
6.2 Cleaning the Drum
- Run a maintenance wash cycle (e.g., a hot wash with no laundry and a descaling agent) periodically to prevent odors and limescale buildup.
6.3 Cleaning the Drain Pump Filter
- Open the service access panel at the bottom right of the machine.
- Place a shallow container to collect any residual water.
- Unscrew the filter cover slowly to drain water, then remove the filter and clean it of lint and foreign objects.
- Reinsert the filter and close the cover and access panel securely.
6.4 Cleaning the Exterior
- Wipe the exterior surfaces with a soft, damp cloth.
- Do not use abrasive cleaners or solvents.
7. Troubleshooting
Before contacting customer service, refer to this section for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not start | Power cord not plugged in; Door not closed properly; Program not selected; Start button not pressed. | Check power connection; Ensure door is latched; Select a program; Press Start. |
| No water intake | Water tap closed; Water inlet hose kinked; Water supply cut off. | Open water tap; Straighten hose; Check water supply. |
| Water not draining | Drain hose kinked or blocked; Drain pump filter clogged. | Check and clear drain hose; Clean drain pump filter (see Section 6.3). |
| Excessive vibration/noise | Machine not level; Transport bolts not removed; Overloaded drum. | Adjust leveling feet; Remove transport bolts; Reduce laundry load. |
| Door will not open | Cycle not finished; Water still in drum; Safety lock active. | Wait for cycle to complete; Run a drain cycle; Wait a few minutes for safety lock to release. |
8. Specifications
Key technical specifications for the Brandt WDB184QWP Washing Machine:
- Model: WDB184QWP
- Brand: Brandt
- Washing Capacity: 8 Kilograms
- Drying Capacity: 6 Kilograms
- Maximum Spin Speed: 1400 RPM
- Voltage: 2.2E+2 Volts AC
- Product Dimensions (W x D x H): 60 x 60 x 80 cm
- Weight: 62.99 kg
- Access Location: Front-loader
9. Warranty and Support
For warranty information, please refer to the warranty card provided with your appliance or contact your local Brandt dealer or authorized service center. Keep your purchase receipt as proof of purchase.
For technical support or service requests, please visit the official Brandt website or contact their customer service department.
