KOHE K10 Cordless Vacuum Cleaner User Manual

Introduction

Thank you for choosing the KOHE K10 Cordless Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before first use and keep it for future reference.

The KOHE K10 is a versatile 500W cordless vacuum cleaner designed for various cleaning tasks. It features a powerful 33Kpa suction, a multi-cyclonic filtration system with HEPA filter, and a foldable design for enhanced usability.

Package Contents

Carefully unpack all components and ensure everything listed below is present and undamaged. If any items are missing or damaged, contact customer support.

• 1 x KOHE K10 Cordless Vacuum Cleaner (main unit)
• 1 x Crevice Nozzle
• 1 x 2-in-1 Brush Tool
• 1 x Power Adapter
• 1 x Detachable Battery
• 1 x Dust Bin
• 2 x HEPA Filters
• 1 x Flexible Tube
• 1 x Floor Brush
• 1 x Wall Mount Bracket
• 1 x Cleaning Tool for Filters

Image: All components of the KOHE K10 Cordless Vacuum Cleaner, including the main unit, various attachments, battery, and wall mount.

Setup and Charging

1. Battery Installation and Charging

1. Ensure the vacuum cleaner is turned off before installing or removing the battery.
2. Align the detachable battery with the battery slot on the main unit and slide it in until it clicks securely into place.
3. Connect the power adapter to the charging port on the battery or the wall mount.
4. Plug the adapter into a power outlet. The battery indicator lights will show the charging status.
5. A full charge takes approximately 4.5 hours. The battery provides 20 to 55 minutes of runtime depending on the power mode used.

Image: Close-up of the KOHE K10's detachable battery, highlighting its capacity and charging port.

2. Assembling the Vacuum Cleaner

1. Attach the flexible tube to the main vacuum unit by aligning the connectors and pushing until it locks.
2. Connect the floor brush to the other end of the flexible tube.
3. For handheld use, attach the crevice nozzle or the 2-in-1 brush tool directly to the main unit.

Operating Instructions

1. Power On/Off and Suction Modes

• Press the power button to turn the vacuum cleaner on.
• The vacuum features 4 power modes. Use the mode selection button to cycle through the available suction settings (e.g., Eco, Standard, Max, Auto).
• In Auto Mode, the vacuum can detect dust levels and adjust suction power automatically for efficient cleaning.
• Press the power button again to turn the vacuum cleaner off.

2. Using the Folding Tube Feature

The flexible tube allows the main unit to fold, making it easier to clean under furniture and in hard-to-reach areas without excessive bending.

Image: A user demonstrating the folding tube feature of the KOHE K10, allowing easy cleaning under low furniture.

3. Floor Brush and LED Headlights

• The floor brush is suitable for various surfaces including carpets, wood floors, and hard floors.
• Integrated LED headlights on the floor brush illuminate dark areas, making hidden dust and debris visible.

Image: The KOHE K10 floor brush demonstrating its effectiveness on carpet, wood, and hard floors, highlighting its 33,000 Pa suction power.

4. Using Attachments

• Crevice Nozzle: Ideal for narrow gaps, corners, and edges, such as between sofa cushions or car seats.
• 2-in-1 Brush Tool: Use the brush for delicate surfaces like upholstery or curtains, and the nozzle for general dusting or pet hair on furniture.

Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your KOHE K10 vacuum cleaner.

1. Emptying the Dust Bin

1. Ensure the vacuum is turned off and disconnected from power.
2. Locate the dust bin release button (often a "One-Button Release").
3. Press the button to open the dust bin flap and empty its contents into a trash receptacle.
4. Close the dust bin flap securely until it clicks.

Image: A user demonstrating the one-button release mechanism for emptying the dust bin of the KOHE K10 vacuum cleaner.

2. Cleaning the Filters

The KOHE K10 uses a multi-cyclonic filtration system with a HEPA filter to capture fine particles.

Image: An exploded diagram illustrating the multi-cyclone filter system of the KOHE K10, showing how dust and air are separated.

1. Remove the dust bin from the main unit.
2. Carefully remove the HEPA filter and other filter components from the dust bin.
3. Rinse the dust bin and filters under cold running water. Do not use detergents.
4. Allow all parts to air dry completely for at least 24 hours before reassembling. Ensure they are completely dry to prevent mold growth and maintain suction power.
5. It is recommended to rinse and dry the dust bin and HEPA filter frequently to prevent clogging and maintain powerful suction.

3. Cleaning the Brush Roll

1. Turn off the vacuum and detach the floor brush.
2. Locate the brush roll access cover on the bottom of the floor brush.
3. Open the cover and remove the brush roll.
4. Use scissors or the provided cleaning tool to cut and remove any tangled hair or fibers from the brush roll.
5. Reinsert the brush roll and close the access cover securely.

Troubleshooting

If you encounter issues with your KOHE K10, refer to the following common problems and solutions:

Specifications

Warranty and Support

For warranty information, product support, or to purchase replacement parts, please refer to the documentation provided with your purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for warranty claims.

Manufacturer: KOHE

Website: Visit the KOHE Store on Amazon