1. Introduction
Thank you for purchasing the Lemorele Wireless HDMI Extender. This device allows for wireless transmission of HDMI audio and video signals up to 656 feet (200 meters) with 1080P resolution. It supports 5G transmission, KVM functionality, IR remote control extension, and an HDMI loop-out feature on the transmitter. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure optimal performance and longevity of your device.
2. Safety Information
Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or damage to the device.
- Power Supply: Use only the provided power adapters. Ensure the voltage matches the device requirements.
- Ventilation: Do not block any ventilation openings. Place the device in a well-ventilated area to prevent overheating.
- Moisture: Keep the device away from water, moisture, and high humidity environments. Do not operate with wet hands.
- Temperature: Operate the device within the specified temperature range. Avoid extreme hot or cold environments.
- Handling: Handle the device with care. Do not drop, strike, or disassemble it. Refer all servicing to qualified personnel.
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth. Do not use liquid or aerosol cleaners.
- Interference: Keep the device away from sources of strong electromagnetic interference.
3. Package Contents
Please check the package contents upon unboxing:
- 1 x Lemorele Wireless HDMI Transmitter (TX)
- 1 x Lemorele Wireless HDMI Receiver (RX)
- 2 x Power Adapters
- 1 x IR Blaster Cable
- 1 x IR Receiver Cable
- 1 x User Manual
4. Product Overview
The Lemorele Wireless HDMI Extender system consists of a Transmitter (TX) unit and a Receiver (RX) unit. Both units are compact and designed for easy integration into your existing setup.

Figure 4.1: Lemorele Wireless HDMI Transmitter (TX) and Receiver (RX) units. The image shows both the transmitter and receiver units, each with two antennas, indicating their wireless capability.
4.1 Transmitter (TX) Unit
The TX unit connects to your HDMI source device (e.g., laptop, DVD player, set-top box).

Figure 4.2: Front view of the TX and RX units. This image highlights the front panels of both units, showing various ports and indicator lights.

Figure 4.3: Back view of the TX and RX units. This image displays the rear panels, including HDMI input/output ports and power connections.
TX Ports and Indicators:
- HDMI IN: Connects to the HDMI source.
- HDMI OUT (Loop Out): Connects to a local display for monitoring the source.
- IR OUT: Connects the IR Blaster cable to control the source device.
- DC 5V: Power input port.
- MODE Button: For pairing and mode selection.
- LED Indicators: Power, Signal, Status.
4.2 Receiver (RX) Unit
The RX unit connects to your HDMI display device (e.g., TV, projector, monitor).
RX Ports and Indicators:
- HDMI OUT: Connects to the HDMI display.
- IR IN: Connects the IR Receiver cable to receive signals from your remote control.
- AUX IN: For external audio output.
- USB Ports (KVM): For connecting a keyboard and mouse.
- DC 5V: Power input port.
- MODE Button: For pairing and mode selection.
- LED Indicators: Power, Signal, Status.
5. Setup Instructions
The Lemorele Wireless HDMI Extender is designed for plug-and-play operation. Follow these steps for a quick setup:
- Connect the Transmitter (TX):
- Connect one end of an HDMI cable to the HDMI output of your source device (e.g., laptop, game console, cable box).
- Connect the other end of the HDMI cable to the HDMI IN port on the TX unit.
- (Optional) If using the HDMI Loop Out feature, connect another HDMI cable from the HDMI OUT (Loop Out) port on the TX unit to a local display.
- (Optional) For IR control, connect the IR Blaster cable to the IR OUT port on the TX unit and position the blaster eye near the IR sensor of your source device.
- Connect the provided power adapter to the DC 5V port on the TX unit and plug it into a power outlet.
- Connect the Receiver (RX):
- Connect one end of an HDMI cable to the HDMI OUT port on the RX unit.
- Connect the other end of the HDMI cable to the HDMI input of your display device (e.g., TV, projector).
- (Optional) For IR control, connect the IR Receiver cable to the IR IN port on the RX unit and position the receiver eye where your remote control can easily point to it.
- (Optional) For KVM functionality, connect your USB keyboard and mouse to the USB ports on the RX unit.
- (Optional) For external audio, connect your speakers or audio system to the AUX IN port on the RX unit.
- Connect the provided power adapter to the DC 5V port on the RX unit and plug it into a power outlet.
- Power On and Pair:
- Once both units are powered on, the LED indicators will light up.
- The units are pre-paired from the factory. They should automatically establish a connection within 5-10 seconds. The Status LED will indicate a successful connection.
- If pairing is lost or you need to pair additional RX units (up to 4 RX units per 1 TX unit), press and hold the MODE button on both the TX and RX units simultaneously until the Status LEDs flash rapidly, then release. They will attempt to pair.
6. Operating Instructions
6.1 Basic Operation
After successful setup, the video and audio from your source device will be wirelessly transmitted to your display. Ensure your display is set to the correct HDMI input.

Figure 6.1: The system supports 5G/2.4G dual-band high-speed transmission for stable and efficient wireless signal delivery, as depicted in this diagram showing a user streaming content to a TV.

Figure 6.2: The device features a built-in signal amplifier, enabling stable transmission up to 200 meters (656 feet) without delay, suitable for large spaces like conference rooms.
6.2 HDMI Loop Out Function
The TX unit includes an HDMI Loop Out port, allowing you to connect a local display to monitor the source content simultaneously with the wireless transmission.

Figure 6.3: The HDMI Loop Out function on the transmitter allows content to be mirrored to two different devices at one time, as shown with a laptop connected to both a local monitor and a wirelessly connected TV.
6.3 KVM Functionality
The RX unit supports KVM (Keyboard, Video, Mouse) functionality, allowing you to control your source device remotely using a USB keyboard and mouse connected to the RX unit.
- Connect your USB keyboard and mouse to the USB ports on the RX unit.
- Ensure the TX unit is connected to the source device you wish to control.
- You can now operate the source device from the location of the RX unit.
6.4 IR Remote Control Extension
The IR extension feature allows you to use your existing remote control to operate the source device from the location of the receiver.

Figure 6.4: The Infrared Remote Control Function allows content at the TX end to be controlled through the IR function at the RX end, enabling remote control of the source device from the display location.
- Connect the IR Blaster cable to the IR OUT port on the TX unit and place the blaster eye near the IR sensor of your source device.
- Connect the IR Receiver cable to the IR IN port on the RX unit and place the receiver eye in a convenient location for your remote control.
- Point your remote control at the IR Receiver eye on the RX unit to control your source device.
6.5 Multiple Receiver Pairing
One Transmitter (TX) unit can be paired with up to four Receiver (RX) units, allowing you to transmit the same HDMI signal to multiple displays simultaneously.

Figure 6.5: This diagram illustrates how one TX unit can be paired with up to four RX units, enabling simultaneous display on multiple screens from a single source.
- To pair additional RX units, ensure the TX unit is powered on and transmitting.
- Power on the new RX unit.
- Press and hold the MODE button on both the TX and the new RX unit simultaneously until their Status LEDs flash rapidly, then release.
- The units will attempt to pair. Once successful, the Status LEDs will indicate a stable connection.
7. Maintenance
To ensure the longevity and optimal performance of your Lemorele Wireless HDMI Extender, follow these maintenance guidelines:
- Cleaning: Disconnect the power adapters from both units before cleaning. Use a soft, dry, lint-free cloth to wipe the surfaces. Do not use liquid cleaners, aerosols, or abrasive materials.
- Storage: If storing the device for an extended period, disconnect it from power and store it in a cool, dry place away from direct sunlight and extreme temperatures.
- Ventilation: Regularly check that the ventilation openings are not obstructed by dust or debris.
- Cables: Ensure all cables are connected securely and are not bent or crimped, which could damage them over time.
8. Troubleshooting
If you encounter issues with your Lemorele Wireless HDMI Extender, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No signal on display |
|
|
| Video flickering or unstable signal |
|
|
| IR remote control not working |
|
|
| KVM (Keyboard/Mouse) not responding |
|
|
If the problem persists after trying these solutions, please contact Lemorele customer support.
9. Specifications
Technical specifications for the Lemorele Wireless HDMI Extender (Model: R15L):
| Feature | Detail |
|---|---|
| Brand | Lemorele |
| Model Number | R15L |
| Color | Black |
| Connectivity Technology | HDMI, Wireless 5G/2.4G |
| Max. Transmission Distance | 656 feet (200 meters) in open areas |
| Supported Resolution | Up to 1080P |
| HDMI Ports | 2 (1x HDMI IN, 1x HDMI OUT/Loop Out on TX; 1x HDMI OUT on RX) |
| Special Features | HDMI Loop Out, KVM Function, IR Remote Control Extension, 1 TX to 4 RX support |
| Compatible Devices | TVs, Projectors, Monitors, DVD/Blu-ray players, Set-top boxes, PCs, etc. |
| Audio Output Mode | Stereo (AUX Out on RX) |
| Surround Sound Configuration | 5.1 |
| Video Encoding | H.264, H.265/HEVC, VP9, MPEG-4, AV1, MPEG-2 |
10. Warranty and Support
Lemorele products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Lemorele website.
Customer Support
If you have any questions, require technical assistance, or encounter issues not covered in this manual, please contact Lemorele customer support through the following channels:
- Email: Refer to your product packaging or the official Lemorele website for contact email.
- Website: Visit the Lemorele Brand Store for FAQs and support resources.
Please have your model number (R15L) and purchase information ready when contacting support.
11. Product Videos
No official product videos from the seller were found in the provided data.