FMART T10
FMART T10 Window Cleaner Robot User Manual
Model: T10
Introduction
The FMART T10 Window Cleaner Robot is an advanced device designed to automate and simplify window cleaning. Featuring a 120ml water tank, dual-spray water pump, and AI intelligent path planning, it provides efficient and thorough cleaning for various glass surfaces. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance of your robot.
Safety Information
Please read all safety warnings and instructions carefully before using this product to prevent injury or damage.
- Always attach the safety rope before operation, especially when cleaning high or exterior windows. Ensure the rope is securely fastened to a sturdy anchor point. The safety rope has a pulling force of up to 1393N (approximately 314 pounds).
- Ensure the power adapter is securely connected during operation. The robot includes an efficient UPS system that provides up to 30 minutes of operation during power outages, allowing time to retrieve the device.
- Do not use the robot on cracked or damaged glass surfaces.
- Keep hands, hair, and loose clothing away from moving parts.
- Do not immerse the robot in water or other liquids.
- Use only recommended cleaning solutions. Avoid corrosive or abrasive cleaners.
- Supervise children and pets when the robot is in operation.
- Store the robot in a cool, dry place when not in use.
Package Contents
Image: What is in package? - This image displays all components included in the FMART T10 Window Cleaner Robot package, such as the main unit, power plug, adapter, replacement wipes, safety harness, spray bottle, remote control, and user manual.
- FMART T10 Window Cleaning Robot (Main Unit)
- Power Adapter
- Safety Rope
- Cleaning Cloths (multiple pairs)
- Spray Bottle
- Remote Control
- Instruction Manual
Product Overview
The FMART T10 features a sleek design with integrated components for efficient window cleaning.
Image: FMART T10 Window Cleaner Robot - This image shows the main unit of the FMART T10 Window Cleaner Robot, its remote control, and a stack of cleaning pads, highlighting its compact design and accessories.
- Main Unit: Houses the motor, water tank, and control systems.
- Water Tank: 120ml capacity for extended cleaning cycles.
- Dual-Spray Nozzles: Ensures even moisture distribution on cleaning pads.
- Cleaning Pads: Microfiber cloths for effective dirt capture.
- Power Button: For turning the device on/off and initiating cleaning.
- Safety Rope Attachment Point: For securing the robot during operation.
Setup
1. Connecting the Safety Rope
Securely attach one end of the safety rope to the robot's designated attachment point. Fasten the other end to a sturdy, immovable object indoors, such as a heavy piece of furniture or a window frame anchor. This is crucial for preventing falls, especially when cleaning exterior or high windows.
Image: How to install and use? Step 1 - This image illustrates the first step of setup, showing a hand screwing the safety rope into the designated attachment point on the robot.
2. Connecting the Power Cord
Connect the power cord to the robot and then to the power adapter. Ensure a firm connection to prevent accidental disconnection during operation.
Image: How to install and use? Step 2 - This image shows the second step of setup, demonstrating how to connect the power cord to the robot's power input.
3. Installation of Cleaning Cloths
Attach the microfiber cleaning cloths to the bottom of the robot. Ensure they are properly aligned and securely fastened to cover the cleaning surfaces.
Image: FMART T10 with cleaning pads attached - This image shows the FMART T10 robot with its microfiber cleaning pads already attached to the underside, ready for use.
4. Connect the Power Supply
Plug the power adapter into a standard electrical outlet. Ensure the power indicator light on the robot illuminates, indicating it is receiving power.
Image: How to install and use? Step 4 - This image shows the fourth step of setup, demonstrating how to plug the power adapter into a wall outlet.
5. Water Tank Filling
Open the water tank cap and fill the 120ml tank with appropriate window cleaning solution. Close the cap tightly to prevent leaks.
Image: Dual Water Spray 120ML Extra large Water Tank - This image highlights the FMART T10's dual water spray mechanism and its 120ml water tank, showing how water is dispersed for cleaning.
6. Start-up Power
Place the robot on the window surface. Press and hold the power button on the robot to turn it on. The robot will adhere to the glass surface using its suction power.
Image: How to install and use? Step 6 - This image shows the final step of setup, where a finger presses the power button on the robot to initiate its operation and suction onto the window.
Operating Instructions
Power and Flashing Lights Description
Image: Description of Power and Flashing Lights - This image provides a visual guide to the robot's indicator lights, explaining what each color and state (solid, flashing) signifies for charging, working, low battery, and abnormal operation.
| Indicator | Status | Meaning |
|---|---|---|
| Power Button (Long Press) | - | Start the device (power on) / Shut down the device (power off) |
| Power Button (Short Press) | - | Start working / Stop working |
| Power Button (Short Press 3x) | - | Enter "network matching mode" (for APP connection) |
| Green Light | Always On | Charging Complete |
| Green Light | Flashing | Charging |
| Blue Light | Always On | Working |
| Red Light | Always On | Low Battery (Please connect adapter for charging before use) |
| Red Light | Flashing | Abnormal in the machine (Please check the machine or restart it) |
| Yellow Light | Flashing | Low Battery (The machine can be normally turned only after its indicator light turns green by charging) |
Cleaning Modes
The FMART T10 offers multiple cleaning modes to suit different needs:
Image: Multiple cleaning modes - This image illustrates the four distinct cleaning modes of the FMART T10: Auto Clean (single pass), Deep cleaning (double pass), 360-degree cleaning (comprehensive coverage), and Spot cleaning (targeted stain removal).
- Automatic Mode: The robot plans an optimal path for general cleaning.
- Deep Cleaning Mode: Performs a double pass over the surface for more thorough cleaning.
- 360-degree Cleaning: Provides comprehensive coverage, ideal for large or complex windows.
- Spot Cleaning Mode: Targets specific areas with tough stains.
Control Methods
The FMART T10 can be controlled via multiple methods for convenience:
Image: APP Intelligent Control - This image shows a hand holding a smartphone displaying the FMART app interface, which allows intelligent control of the window cleaning robot.
- APP Control: Download the FMART APP to your smartphone. The app supports 10 languages, voice control, guides, troubleshooting, and OTA updates. Ensure your phone is connected to a 2.4GHz Wi-Fi network for pairing.
- Remote Control: Use the included 2.4G remote control for interference-resistant, point-free operation with a 10-meter range and through-wall capability.
- One-Button Control: The power button on the robot itself allows for simple start/stop functionality.
Image: Multiple operating modes - This image visually presents the three primary ways to operate the FMART T10: via the smartphone app, the physical remote control, and the one-button control directly on the robot.
AI Edge Detection and Path Planning
The T10 utilizes built-in AI to detect window frames and adjust its path, ensuring thorough cleaning even without visible frames and avoiding obstacles. Its intelligent path planning algorithm enhances cleaning efficiency.
Image: Ultra-thin Robot, Edge Detection, Path Planning - This image showcases three key features: the robot's ultra-thin profile, its advanced edge detection system, and its intelligent path planning capability, illustrating how it navigates and cleans surfaces.
Image: Intelligent Path Planning - This image illustrates the robot's intelligent path planning, showing a systematic cleaning route that increases efficiency, along with features like algorithm upgrades and automatic homing.
Auto Adjustment of Suction Power
The robot features a brushless motor with variable suction (2600-3800PA) that automatically adjusts based on the dirt level on the surface, ensuring optimal cleaning performance.
Image: Auto Adjustment of Suction Power - This image visually explains how the FMART T10 automatically adjusts its suction power from 2600Pa to 3800Pa depending on the type and severity of dirt, such as rain stains, sand, mud, bird poop, wall plaster, and oil stains.
Maintenance
Cleaning Cloths
The ultra-fine fiber cloths are reusable and machine washable. After each use, remove the cloths and wash them thoroughly to maintain cleaning efficiency. Replace cloths when they show signs of wear or reduced effectiveness.
Image: Microfiber cloth - This image highlights the microfiber cleaning cloths used by the FMART T10, emphasizing their professional customization, reusability, and machine-washable properties, along with a magnified view of the fiber structure.
General Care
- Wipe the robot's exterior with a soft, dry cloth after each use.
- Periodically check the suction cups for debris and clean them to ensure strong adhesion.
- Empty and rinse the water tank after each use to prevent residue buildup.
- Store the robot in its original packaging or a safe, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot not adhering to window | Insufficient suction; dirty suction cups; uneven surface. | Ensure power is connected. Clean suction cups. Ensure surface is flat and clean. Dampen pads slightly before use. |
| Robot not spraying water | Water tank empty; nozzle clogged; pump issue. | Refill water tank. Check nozzles for blockages. Ensure water spray button is pressed (5 times initially for new use). |
| Robot not moving or stuck | Obstacle detected; low battery; abnormal operation. | Clear obstacles. Check battery status (red light). Restart the robot. |
| App connection issues | Incorrect Wi-Fi band; pairing mode not activated. | Ensure phone is on 2.4GHz Wi-Fi. Short press power button 3 times to enter network matching mode. |
| Poor cleaning performance / streaks | Dirty cleaning cloths; insufficient cleaning solution; improper solution. | Replace or wash cleaning cloths. Refill water tank. Use recommended window cleaning solution. |
Specifications
- Brand: FMART
- Model Name: T10
- Special Features: 120ml Capacity Water Tank, Dual-channel Spray Cleaning, 2.4G remote control + APP control + multilingual support, AI intelligent path planning, Brushless motor + metal impeller delivers powerful 3800PA variable-frequency suction, Targeted and dual-pass cleaning
- Color: White - Spray
- Product Dimensions: 11.5"L x 5.67"W x 2.96"H
- Included Components: Window Cleaning Robot, Power Adapter, Safety Rope, Cleaning Cloths, Spray Bottle, Remote Control, Instruction Manual
- Filter Type: Cloth
- Battery Life: 3 Hours
- Capacity: 120 Milliliters
- Power Source: Battery Powered
- Control Method: Remote, APP
- Form Factor: Robotic
- Item Weight: 5.06 pounds
- Manufacturer: FMART
- Batteries: 1 Lithium Ion battery required (included)
- Date First Available: May 24, 2023
Warranty and Support
FMART is committed to providing high-quality products and customer service.
- Warranty: Up to a 365-day warranty from the date of purchase.
- Money-Back Guarantee: 30-day money-back guarantee.
- Customer Support: 24/7 email support with quick responses.
Image: Professional Customer Service - This image shows a group of customer service representatives with headsets, indicating FMART's commitment to professional quality service and support.
For further assistance, please refer to the contact information provided in your product packaging or visit the official FMART website.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.