1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Brilvibera Outdoor Wall Light Motion Sensor. Please read this manual thoroughly before installation and retain it for future reference. This outdoor light fixture is designed to provide reliable illumination and enhanced security for your exterior spaces.
Front view of the Brilvibera outdoor wall light, showcasing its black metal frame, seeded glass panels, and integrated motion sensor at the top.
2. Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- All wiring connections must be in accordance with local and national electrical codes. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
- Do not install this fixture with wet hands or while standing on a wet or damp surface.
- Ensure the fixture is securely mounted to a structural element.
- Use only bulbs that meet the specified wattage and base type (E26).
3. Package Contents
Verify that all components are present before beginning installation:
- Outdoor Wall Light Fixture
- Mounting Hardware
- Shade (pre-assembled)
4. Specifications
| Brand | Brilvibera |
| Model | B0C65DT4BX |
| Color | Black |
| Material | Glass, Metal |
| Style | Modern, Classic, Contemporary, Mid-Century Modern |
| Light Fixture Form | Sconce |
| Room Type | Outdoor |
| Specific Uses | Balcony, Deck, Garage, Garden, Patio, Yard, Driveway, Entryway, Backyard, Stairways, Courtyard, Pool |
| Indoor/Outdoor Usage | Outdoor |
| Power Source | Hardwire |
| Installation Type | Flush Mount |
| Special Features | Anti-Rust, Energy Efficient, Motion Sensor, Water Resistant, Waterproof |
| Control Method | Touch (via wall switch) |
| Light Source Type | Edison, Incandescent, LED |
| Finish Type | Black Metal Finish |
| Shade Material | Glass & Metal |
| Number of Light Sources | 1 |
| Voltage | 120 Volts (AC) |
| Bulb Base | E26 |
| Item Weight | 4.16 pounds (1.89 Kilograms) |
| Package Dimensions | 14.25 x 8.98 x 7.36 inches |
Diagram illustrating the height, width, and depth measurements of the outdoor wall light in both centimeters and inches.
5. Setup (Installation)
For detailed installation instructions, please refer to the official Installation Manual (PDF). Below are general steps:
- Prepare for Installation: Turn off power at the circuit breaker or fuse box to avoid electrical shock.
- Mounting Bracket: Attach the round universal mounting bracket to your junction box using the provided screws. Ensure it is securely fastened.
- Wiring: Connect the fixture's wires to your household wiring according to local electrical codes. Typically, this involves connecting live to live (black to black), neutral to neutral (white to white), and ground to ground (green or bare copper to green or bare copper). Use appropriate wire nuts.
- Attach Fixture: Align the fixture with the mounting bracket and secure it using the provided hardware (e.g., crown nuts). The glass is pre-assembled for convenience.
- Install Bulb: Insert a compatible E26 bulb (not included) into the socket. The bottom-open design facilitates easy bulb replacement.
- Restore Power: Turn the power back on at the circuit breaker.
Image showing the light fixture being installed on a wall, highlighting the ease of hooking up and changing light bulbs due to its design.
A hand reaching into the bottom of the light fixture, demonstrating the open design for convenient maintenance.
6. Operating Instructions
The Brilvibera Outdoor Wall Light features an advanced motion sensor with three distinct operating modes, which can be cycled using your standard wall switch.
An outdoor scene showing two Brilvibera wall lights installed on a house, illustrating their wide motion detection range of 40 feet and 220 degrees, covering a family and their pet.
Motion Sensor Modes:
- Mode 1 (Auto Mode - 30%-100%-30%):
To activate: Turn the wall switch OFF-ON-OFF-ON within 0.5-2 seconds.
Function: The light illuminates at 30% brightness from dusk. When motion is detected, it switches to 100% brightness for a set duration, then returns to 30% brightness when no motion is detected. - Mode 2 (Auto Energy-Saving Mode - 0%-100%-0%):
To activate: Turn the wall switch OFF-ON within 0.5-2 seconds.
Function: The light remains off when no motion is detected. Upon motion detection, it illuminates at 100% brightness and reverts to off after approximately 2 minutes of no motion. - Mode 3 (Manual Override Mode - 100% All Night):
To activate: This mode resets automatically after 8 hours or at dawn.
Function: The light stays on at 100% brightness throughout the night, automatically turning off at dawn.
Visual representation of the three motion sensor modes: Auto Mode (30%-100%-30%), Auto Energy-Saving Mode (0%-100%-0%), and Manual Override Mode (100% all night).
Split image showing the light fixture during daytime and nighttime, illustrating its energy-saving capability by automatically adjusting brightness or turning off.
7. Bulb Recommendation
The Brilvibera Outdoor Wall Light is compatible with any bulb featuring a standard E26 socket. To ensure optimal performance and prevent flickering, it is recommended to use dimmable LED bulbs or incandescent bulbs. Bulbs are not included with the fixture.
Image displaying various types of E26 base bulbs (incandescent and dimmable LED) that are compatible with the fixture, with a note that bulbs are not included.
8. Maintenance
Regular maintenance ensures the longevity and optimal performance of your outdoor wall light.
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or glass. The bottom-open design allows for easy one-hand cleaning.
- Bulb Replacement: Ensure power is off. The bottom-open design facilitates easy bulb replacement without disassembling the entire fixture.
- Weather Resistance: The fixture is designed to withstand various weather conditions (rain, snow, temperature fluctuations) due to its reinforced cross-frame design and durable materials.
Image depicting the outdoor wall light under simulated rain, with icons indicating anti-corrosion, waterproof, sunproof, snowproof, and dustproof properties.
Close-up images detailing the anti-corrosion treatment on various parts of the light fixture, ensuring durability.
9. Troubleshooting
If you encounter issues with your Brilvibera Outdoor Wall Light, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture Loose wiring connection Faulty bulb Sensor malfunction | Check circuit breaker/fuse. Ensure power is on. Verify all wire connections are secure (power off first). Replace bulb with a new, working E26 bulb. Ensure sensor is not obstructed. Cycle power to reset modes. |
| Light flickers | Incompatible bulb type Loose bulb connection | Use dimmable LED or incandescent bulbs as recommended. Tighten the bulb in the socket. |
| Motion sensor not detecting | Sensor obstructed Incorrect mode setting Detection range issues | Clear any obstructions from the sensor lens. Cycle through the operating modes using the wall switch to ensure the desired mode is active. Ensure the sensor is positioned correctly for optimal detection (40ft distance, 220° angle). |
| Light stays on constantly (not in Mode 3) | Sensor continuously triggered Mode setting error | Check for constant movement within the sensor's range (e.g., swaying branches, passing traffic). Cycle through modes using the wall switch to reset. |
If problems persist after attempting these solutions, please contact Brilvibera customer support.
10. Warranty and Support
For any questions, technical assistance, or warranty inquiries regarding your Brilvibera Outdoor Wall Light Motion Sensor, please refer to the contact information provided with your purchase or visit the official Brilvibera website.
You can also access the detailed Installation Manual (PDF) for further guidance.