Craftmade Westminster 3-Tube Contemporary Chime (Model CE3-FBSB) Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Craftmade Westminster 3-Tube Contemporary Chime, Model CE3-FBSB. This chime features strong architectural details with contemporary styling, offering 4 or 8 note options for the front door and a single note for the back door, along with adjustable volume. Please read these instructions carefully before beginning installation or operation to ensure proper function and safety.

2. Safety Information

• Electrical Safety: Installation should be performed by a qualified electrician or a person knowledgeable in electrical wiring. Always turn off power at the circuit breaker before installing or servicing the chime.
• Voltage: This unit operates on 120 Volts. Ensure your electrical system is compatible.
• Local Regulations: Always check and comply with local electrical codes and regulations before installation.
• Intended Use: This product is designed for indoor use as a door chime. Do not use for purposes other than its intended design.

3. Package Contents

Verify that all components are present before beginning installation:

• Westminster Chime Unit (Model CE3-FBSB)
• Mounting Hardware
• Instruction Manual

Note: A T1630 transformer is required for operation and is not included with this package. If replacing an older 3-wire doorbell system, a new 2-wire transformer may be necessary.

4. Setup and Installation

4.1 Mounting

The Craftmade Westminster Chime is designed for wall mount, vertical installation. The unit features a 7.56-inch hole pattern for secure mounting. Ensure the mounting surface is stable and capable of supporting the chime's weight (approximately 2.6 pounds).

4.2 Wiring

This chime operates on a corded-electric 120 Volts power source. It requires modern 2-wire doorbell wiring. If you are replacing an older doorbell system that uses a 3-wire setup (front, rear, and transformer with commons tied together), this chime is not directly compatible. You will need to convert your wiring to a modern 2-wire configuration and install a compatible 2-wire transformer (T1630, not included).

Wiring Steps:

1. Turn off power at the main circuit breaker before handling any wiring.
2. Connect the transformer wires to the chime unit according to the wiring diagram provided with the chime (refer to specific diagrams if included in your package).
3. Connect the doorbell button wires to the appropriate terminals on the chime for front, back, and side door configurations.
4. Secure all wire connections.
5. Mount the chime unit securely to the wall using the provided hardware.
6. Restore power at the circuit breaker and test the chime.

4.3 Visual Guide

Image: Front view of the Craftmade Westminster 3-Tube Contemporary Chime, featuring a flat black housing with a satin brass decorative panel and three brass chime tubes.

5. Operating Instructions

5.1 Chime Notes

This chime offers a selection of 4 or 8 notes for the front door and a single note for the back door. The specific note configuration is typically set during installation via internal jumpers or switches. Refer to the detailed wiring diagram included with your product for instructions on selecting the desired note sequence.

5.2 Volume Adjustment

The chime unit includes an adjustable volume control. This control is usually a small dial or slider located on the side or bottom of the chime housing. Adjust it to your preferred sound level.

6. Maintenance

To ensure the longevity and appearance of your chime, follow these simple maintenance guidelines:

• Cleaning: Dust the chime regularly with a soft, dry cloth. For more thorough cleaning, lightly dampen a cloth with water and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could damage the finish.
• Inspection: Periodically check wiring connections to ensure they are secure.
• Environment: Install the chime in a dry, indoor location away from direct moisture or extreme temperature fluctuations.

7. Troubleshooting

If you encounter issues with your Craftmade Westminster Chime, consider the following:

• No Sound: Ensure power is supplied to the chime and the transformer is functioning correctly. Check all wiring connections for looseness or corrosion.
• Incorrect Chime Sound: Verify that the internal note selection settings (jumpers/switches) are correctly configured for your desired 4 or 8 note sequence.
• Low Volume: Adjust the volume control dial on the chime unit.
• Compatibility with Smart Doorbells: This chime may not be compatible with all smart doorbell systems, such as Ring Camera. Consult the smart doorbell manufacturer's specifications for compatibility requirements.
• Wiring Issues: If you have an older home with 3-wire doorbell wiring, this chime requires conversion to a modern 2-wire setup and a compatible 2-wire transformer (T1630, not included). Incorrect wiring will prevent proper operation.

8. Specifications

9. Warranty Information

All Craftmade products purchased come with a 30-day replacement parts policy to ensure a fully working item. Additionally, all products are covered under a 1-Year warranty when purchased on Amazon. The warranty period begins on the day the product is originally shipped.

The warranty covers all items and conditions identified in the original manufacturer's warranty. Items specifically not covered by the warranty include, but are not limited to: loss and theft, water damage, customer abuse, and finish deterioration due to UV or coastal exposure.

10. Support

For further assistance, technical support, or warranty claims, please contact Craftmade customer service. Refer to the packaging or the official Craftmade website for the most current contact information.